Sustainability of dairy production depends on their production of feed and finding ways to increase profitability through dairy production or even carbon (C) crediting and adding C inputs into the soil to sequester C. To increase farm profitability, dairy producers in Illinois, has intensified their feed production through integrating winter cereals such as winter cereal rye (Secale cereale) (WCR) into single season corn for silage (double cropping). Intensified cropping system allows for increased feed production, covering the soil year-round, and adding C inputs while minimizing nutrient loss mainly through runoff or leaching. Two management practices that improve the sustainability of corn silage – WCR double crop are harvesting date and nitrogen (N) management during the WCR phase of the production. This thesis has two main chapters. Chapter 1 evaluates the effect of harvesting date (five weekly harvest from late-March to early-May) with and without optimum N addition (0 vs. 47 kg N ha-1). Our objective was to evaluate harvesting date and spring N fertilization effect on WCR morphology, forage yield, nutrient removal, and quality. A quadratic model best explained an increase in WCR biomass in response to GDD (growing degree days) accumulation (R2 = 0.81). Increase in GDD linearly decreased WCR relative forage quality (RFQ). Benchmarking RFQ at 150 for dairy milk production indicates that WCR should be harvested at a GDD of 543 at which WCR plant height was 31.8 cm and dry matter (DM) biomass was 0.77 Mg ha-1. Benchmarking RFQ at 125 for heifer production indicated that harvest should occur at a GDD of 668 at which the WCR was 71 cm tall and its DM yield was 2.25 Mg ha-1. Nitrogen balances were negative at the no-N control treatment indicating a need for some N to maximize WCR yield. We found that a rate between 21 and 42 kg N ha-1 maximizes yields reflecting on slightly positive balances. Our results suggest that harvesting date can be predicted by GDD and should be adjusted for RFQ. We conclude that smaller than 42 kg N ha-1 N fertilizer is required for WCR production in soils with manure history and high soil organic matter (>30 g kg-1). Chapter 2 hypothesized that N fertilization of WCR as cover crop can increase nutrient recycling and C sequestration which offers C trading benefits to growers. We evaluated the effects of N fertilizer application in fall (0 vs. 56 kg N ha-1), and N fertilizer rates in spring (0, 23, 47, and 71 kg ha-1) on WCR dry matter (DM) biomass and cover crop quality. Results indicated that fall N fertilization had no effect on WCR biomass or quality reflecting on loss of applied N in the fall. Spring N application did not affect WCR biomass yield but increased N, P, and K concentrations, their uptake, C concentration, and decreased C:N and lignin:N ratios. We concluded that only spring N fertilization improves WCR cover crop benefits. Overall, we suggest that for high-quality forage, (RFQ at 150) WCR should be harvested at a GDD of 543 at which WCR plant height was 31.8 cm and dry matter (DM) biomass was 0.77 Mg ha-1. For RFQ of 125 (for heifer production), harvest should occur at a GDD of 668 at which the WCR was 71 cm tall and its DM yield was 2.25 Mg ha-1. Neither in fall nor in spring, N fertilization increase WCR C accumulation. Spring N fertilization reduces WCR C:N and lignin:N which are desirable for crop production.

Corn (Zea mays L.) and soybean (Glycine max L.) production in the Midwest US can result in significant nutrient leaching to groundwater and surface waters, which contributes to eutrophication and hypoxia in the Gulf of Mexico. A promising strategy to control nutrient leaching and sediment runoff loss during winter fallow period is the use of cover crops (CCs). In southern Illinois, CCs are not widely adopted by farmers due to economic constraints and the lack of scientific data that supports benefits of incorporating CCs into the corn-soybean rotation. Therefore, this doctoral dissertation addresses the critical question of the feasibility of the use of CCs in southern Illinois and is divided into three overarching research studies with different objectives divided into six research chapters. Research study 1 was a field experiment conducted from 2013 to 2017 to examine the effect of CCs (CC vs noCC) under two tillage systems [(no-tillage (NT) and conventional tillage (CT)] on aboveground plant attributes [dry matter yield, C:N ratio and nitrogen uptake (N uptake)], crop yields, available soil N content and N leaching in the vadose zone. The experimental layout was a randomized design with three rotations including corn-noCC-soybean-noCC [CncSnc], corn-cereal rye (Secale cereale L.) –soybean-hairy vetch (Vicia villosa R.) [CcrShv], and corn-cereal rye-soybean-oats+radish (Avena sativa L. + Raphanus sativus L.) [CcrSor] and two tillage systems. Soil samples collected after corn or soybean harvest and CC termination were analyzed for standard soil fertility parameters. Pan lysimeters installed below the ‘A’ horizon with depth varying from 22 to 30 cm were used for measuring soil solution nutrient concentration on weekly or biweekly basis depending on the precipitation. In NT system, the corn yield was 14% greater with CcrShv compared to CncSnc, whereas no significant difference existed in corn yield due to CC treatments within CT. Both CC treatments under NT reduced soybean yield by 24 to 27% compared to noCC. The rotations CcrShv and CcrSor with hairy vetch and oats+radish as preceding CCs resulted in 89% (37.73 vs 19.96 kg ha-1) and 68% (33.46 vs 19.96 kg ha-1) more nitrate-N (NO3-N) leaching than the CncSnc during cash crop season 2015. During the CC season in spring 2016, cereal rye CC in CcrShv and CcrSor reduced the NO3-N leaching by 84% (0.68 kg ha-1) and 78% (0.63 kg ha-1) compared to the CncSnc, respectively, under the CT system. Overall, our results indicated that the CT system had greater N leaching losses compared to NT system due to higher N availability in the tilled soil profile. The goal of the second research study was to understand the mechanisms of N cycling by CCs. Therefore, we applied 15N labeled urea fertilizer (9.2% atom) to corn that followed hairy vetch and noCC in May 2017 to evaluate the contribution of fertilizer and soil organic matter to N leaching and quantify the 15N content of surface runoff after storm events. During the 2017 corn season, repeated soil samples were collected and analyzed for 15N fertilizer recovery in soil at three depths. 15N recovery was higher in the corn that had hairy vetch as the preceding CC than the corn that had noCC by 13.13 and 3.68 kg ha-1 on soil sampling events of 7 and 21 days after planting of corn, respectively, at the depth 15-30 cm. Overall, the cumulative loss of 15NO3-N during corn season 2017 was <2% of the applied fertilizer. The contribution of NO3-N from soil organic matter to leaching was 61% higher for the corn rotation with hairy vetch CC compared to corn rotation with noCC (1.12 vs 0.69 kg ha-1). Research study 3 evaluated the effects of CCs (cereal rye and hairy vetch) and topography (shoulder, backslope, footslope) on corn-soybean production, soil and water quality, nutrient and sediment export in agricultural headwater streams in a paired-watershed experimental design. The crop rotation followed in the CC-watershed was corn-cereal rye-soybean-hairy vetch whereas the rotation in the noCC watershed was corn-noCC-soybean-noCC. Use of hairy vetch CC increased N uptake at shoulder, backslope and footslope positions by 110.90, 85.02, and 44.89 kg ha-1, respectively, when compared to noCC treatment. The corn yield at the shoulder position was increased by 69% in CC-watershed compared to noCC watershed in 2017 likely by providing large N additions following decomposition. Cereal rye increased soybean yield by 17% and 8% at the shoulder and backslope position, respectively in 2016. Additionally, the effects of topography and CCs on soil N levels and N leaching in the watersheds were also evaluated. The NO3-N concentrations measured using suction cup lysimeters in CC-watershed were reduced by 2.54 mg L-1 (67%) when compared to noCC watershed. During the hairy vetch CC season, the reduction in NO3-N concentrations in soil solution was only seen at the footslope position. The excessive N at footslope positions may have been immobilized or denitrified due to soil waterlogging from higher water availability at the footslope. Forty-two and 18 storm events were collected during a 4-yr calibration period and CC-treatment period, respectively. Predictive regression equations developed from the calibration period were used for calculating TSS, NO3-N, NH4-N, and DRP losses of surface runoff for the CC-treatment watershed. The CCs reduced TSS and discharge by 33% and 34%, respectively in the CC-watershed during the treatment period. However, EMCs for NO3-N, NH4-N, and DRP did not decrease. Overall, CCs are a recommended conservation practice for farmers who want to enhance the long term profitability of their production systems, while building soil health and protecting downstream water quality. The CCs have the potential to reduce nutrient leaching, peak/total discharge, improve soil quality and crop yields. However, reduction in leaching will depend on the type of CC (legume vs non-legume crops) used in rotation, the time of termination of CCs, cover crop establishment and number of years under CCs. Synchronizing N availability from CCs to N uptake by cash crop is important for reducing nitrate leaching and increasing crop yields.

<p dir="ltr">Previous research has documented rye (Secale cereale L.) cover crop (RCC) benefits on weed suppression, erosion control, and water quality. However, RCC adoption is often low prior to corn (Zea mays L.) due to observed yield losses caused by a RCC. Therefore, further research is required to understand and develop corn agronomic, planting equipment, and N fertilizer timing recommendations following a RCC to minimize crop stress and yield losses. The objective of this research was to evaluate corn performance and yield in response to different N fertilizer application timings and after-market closing wheel types following a RCC using multiple field-scale environments. Treatments within the N timing study included three N fertilizer timings (2x2 starter + V5 sidedress, 2x2 + V10, and 2x2 + V5 + V10) and two RCC treatments (RCC and no RCC). Treatments within the closing wheel study included three closing wheel types: Standard Rubber (SR), Cruiser Extreme (CE), and Cupped Razor (MCR), and two RCC treatments (RCC and no RCC. Both studies were conducted at field-scale using commercial equipment at four locations in Indiana in 2022 and 2023. In the N timing study a significant (P<0.1) RCC x N timing interaction was observed in 5 of 6 site-years, indicating optimum N fertilizer timing differs with the presence of a RCC. Without the inclusion of a RCC, the use of a 5x5 + V10 or 5x5 + V5 + V10 N application decreased yield in 4 of 6 and 0 of 6 site-years, respectively when compared to a 5x5 + V5 N application. Whereas, with a RCC the use of a 5x5 + V10 or 5x5 + V5 + V10 N decreased yield in 6 of 6 and 2 of 6 site-years, respectively when compared to a 5x5 + V5 N application. In the closing wheel study, aftermarket closing wheels showed no difference in daily emergence timing and/or final plant stand in no-till conditions without a RCC. However, in RCC treatments, the CE improved total percent corn emergence [7 – 12 days after planting (DAP)] by 6 and 15% at 2 of 3 site-years. Whereas, the MCR improved percent corn emergence (7-12 DAP) by 8% in 1 of 3 site-years. Furthermore, corn grain yield was increased by 5-8 bu ac-1 at 2 of 3 site-years with CE when following a RCC and by 7 bu ac-1 at 1 of 3 site-years with MCR when following a RCC. Overall, results suggest farmers can combine the use of after-market closing wheels designed for high residue/RCC systems and optimum N fertilizer application timing (5x5 + V5 sidedress) to improve corn emergence, reduce N stress, and improve yield following a RCC.</p>

The diverse cropping system of eastern Virginia's coastal plain offers limited opportunity to establish winter annual cover crops (WCC) for nitrogen (N) scavenging. The winter fallow niche after double-crop or full-season soybean (Glycine max L. Merr.) encompasses the majority of acres left fallow. Our objective was to evaluate interseeded WCC N scavenging performance following soybean and N supplying capacity to subsequent corn (Zea mays L.). Field studies were conducted at four different locations in each of the two study years. The experimental design was split plot with cereal rye, hairy vetch, and RV mix WCC as main plots and ten fertilizer nitrogen (FN) rates in a factorial arrangement (0 and 45 kg FN ha-1 as starter; and 0, 45, 90, 135, and 180 kg FN ha-1 at sidedress) to corn as subplots. The highest N uptake for cereal rye at winter dormancy was 18 kg N ha-1, but the average was 6-7 kg N ha-1. At WCC termination average N uptake for cereal rye was 35 and 40 kg N ha-1 in 2013 and 2014, respectively. Average biomass dry matter (DM) at WCC termination for cereal rye, cereal rye + hairy vetch mix (RV mix), and hairy vetch was 2356, 2000, and 1864 kg ha-1 in 2013; and 2055, 2701, and 692 kg ha-1 in 2014, respectively. Average cereal rye N uptake was 35 kg N ha-1 in 2013 and 40 kg N ha-1 in 2014. Significant differences for residual soil nitrogen were most apparent for soil nitrate (NO3-N) at lower depths (15-30 and 30-60 cm) during WCC termination and in the upper 0-15 cm during corn growth stage (GS) V4 of both years. Corn grain yield plateau following hairy vetch WCC was 0.7 and 0.6 Mg ha-1 higher than when following cereal rye WCC at zero and 45 kg ha-1 starter FN, respectively. Average agronomic optimum FN rates (AONR) were 26 and 9 kg ha-1 lower following hairy vetch than cereal rye WCC at zero and 45 kg ha-1 starter FN, respectively. Estimated hairy vetch FN reductions by FN replacement and AONR difference methods were 48 and 18 kg FN ha-1 in plots receiving zero starter FN; and 58 and -43 kg FN ha-1 in plots receiving 45 kg ha-1 starter FN. In-season soil N tests did not offer adequate information in order to predict sidedress FN reductions. These findings suggest that cereal rye and RV mix have the potential to scavenge and conserve residual soil N and hairy vetch is more than capable to supply PAN to subsequent corn when interseeded into soybean. / Master of Science

Horseweed (Conyza canadensis (L.) Cronq.) is prevalent in Kentucky and can be difficult to control. Research has shown multiple weed control methods to be more sustainable than relying on chemical control alone, so the use of multiple methods for horseweed management was examined in this study. The main objective was to determine best practice(s) to reduce horseweed prior to soybean [Glycine max (L.) Merr.]. Treatments included: fall-planted cover crop [CC; cereal rye (Secale cereale L.) or none], fall-applied herbicide (saflufenacil or none), and spring-applied herbicides (dicamba, 2,4-D ester, or none). We hypothesized horseweed densities would be reduced the most where all factors were combined. Saflufenacil suppressed horseweed densities from application through March, when densities increased due to a lack of competition from other winter weeds. Spring herbicides decreased horseweed densities until soybeans reached V1 in 2017, but in 2018 lost efficacy after CC termination. CC alone resulted in the longest horseweed suppression. The combination of spring herbicides and CC usually reduced horseweed densities to near zero between the CC termination and soybean planting. However, some low densities seen soon after soybean planting could be problematic. Further research must be conducted to determine the best integrated horseweed management system until soybean canopy closure.

Agroecosystem sustainability as a framework for agriculture production systems requires attention to detail to multiple facets of the underlying production system. Production systems must achieve optimal cash crop yields while remaining profitable. Likewise, production practices must be tailored to reduce its environmental footprint. Identifying practices that encourage improved soil physical and chemical properties while maintaining yields have largely been challenging. Cover crops have been an integral part of the conversation regarding practices that can generally improve those properties of soil responsible for overall soil health. Use of winter cereal cover crops (WCCC’s) have shown promise as a tool for reducing soil and nutrient run-off, thereby reducing nitrogen (N) and phosphorus (P) nonpoint source pollution in the Upper Mississippi River Basin (UMRB). However, corn-cash crop yield penalties are often incurred following the use of WCCC’s such as winter cereal rye (Secale cereal) (WCR), as N is immobilized by cover crop residues in the decomposition processes. Additionally, traditional planting methods of cover crops have resulted in reductions of harvestable populations of corn and soybeans. These problems indicate a necessity for novel cover crop planting methods that reduce the consequential outcomes of implementing traditional cover crop practices. Using a method called “Skipping the corn row” (STCR), otherwise identified as “precision planted” cover crops, we aimed to reduce the cash crop yield-limiting interactions of cover crop residues within the cash crop row. We hypothesized that removing cover crop biomass from the subsequently planted cash crop row (chapter 1) could minimize N immobilization by residues, thereby increasing our subsequent yield potential and economic optimum return to N (EORN). In novel cover crop planting methods preceding soybeans (chapter 3), our hypothesis indicated that mixtures of WCR and crimson clover (Trifolium incarnatum) would impact biomass accumulation of weed communities, while novel measures that allowed for reduced seeding rates would permit competitive soybean yields while reducing input costs for cover crop seed. Chapter 2 focused on interseeding mixtures of WCR and crimson clover, where we hypothesized that residual rates would marginally impact percent cover of WCR and crimson clover mixtures. Our results indicated, in chapter one, that reducing seeding rate by using STCR planting method did indeed drive seed cost savings while improving yield and EORN in comparison to a traditionally planted cover crop. Our results in chapter 3 also indicated reduced seeding rates found in novel planting methods improved the on-farm economics of using cover crops while maintaining healthy soybean yields. Lower-than-average rainfall accumulations later in the growing season coupled with cover crop residues likely influenced soil moisture retention, benefiting the cash crop during the dry spell, helping maintain yields. Interseeding methods, as studied in chapter 2, did not show any significant impact on corn grain yield or yield components. Subsequently, half- and full-rate residual herbicides did not impact percent cover of cover crops. However, use of residual herbicides should be consistent with all herbicide labels and laws, and producers should use label-recommended amounts to maintain maximum efficacy of herbicides and to prevent resistant weed populations. Also, interseeded cover crops failed to successfully establish, resulting in minimal cover crop biomass in later sampling dates.

Cereal rye (CR), the most common and effective nitrogen (N) scavenging cover crop option in the Midwest, is often utilized in cropping systems to reduce nitrate loss for environmental benefits. To increase environmental efficiency in Midwest corn cropping systems, we must increase the overall adoption of CR. However, due to the yield reduction potential (6%) for corn planted after CR termination, CR is primarily recommended before soybean. To increase CR adoption, we must develop adaptive fertilizer management practices that achieve competitive grain yields relative to cropping systems where CR is not adopted. Therefore, the objectives of this study are to determine (1) the effect of CR and starter nitrogen rate on corn growth and nitrogen content. (2) the optimum starter nitrogen rate to achieve agronomic optimum corn yield following CR. (3) the impact of phosphorus (P) at starter on plant growth, nitrogen content, and yield with the inclusion of CR. For our study, five starter N rates were applied in a 5x5 cm band to both CR and non-CR plots, concentrations ranged from 0-84 kg N ha^-1in 28 kg N ha^-1 intervals. Total N applied was the same for each treatment, relative to its location, and was split between starter N at planting and sidedress applied at growth stage V6 relatively. Although CR termination took place at least two weeks before planting, CR decreased corn grain yield at one of three locations by an average of 8%, nitrogen recovery efficiency (NRE) by 27%, and R6 total N content by 23%, relative to the conventional control (non-CR 0N), when no starter N was applied. At one of three locations, starter N rates of 56 kg N ha^-1, 56 kg N ha^-1plus 17 kg P ha^-1, and 84 kg N ha^-1 increased corn grain yield, in CR plots, and 56 kg N ha^-1 plus 17 kg P ha^-1 increased corn grain yield in non-CR plots. Phosphorus increased corn grain N content at growth stage R6 in one of three locations and did not impact corn grain yield at all locations. We conclude that the inclusion of starter N at planting has the potential to increase agronomic productivity in CR corn cropping systems in soil environments with a high capacity to mineralize soil N. However, further research is required to refine our starter N results to find an optimum starter N rate to apply before planting corn following CR.

<p></p><p>It is estimated that in the United States, agronomic weeds are responsible for about 50% of crop yield loss, costing nearly $27 billion each year. As interest in cover crops across the Midwest increases, so does the need to understand when to terminate cover crops for maximum weed control while still maintaining crop yield. Field experiments were conducted in 2017 and 2018 in Indiana to evaluate the effect of cover crop termination timings on weed control, and corn and soybean yield. Cereal rye (<i>Secale cereale </i>L.) and canola (<i>Brassica napus </i>L.) were subjected to early- or late- termination utilizing glyphosate-, saflufenacil- or glufosinate-based burndown herbicide programs. In corn, cereal rye and canola reduced early season weed biomass by 58 to 67% compared to fallow (no cover crop) plots. Cereal rye and canola reduced horseweed (<i>Erigeron canadensis </i>L.) and giant ragweed (<i>Ambrosia trifida </i>L.) emergence by 42 to 50% compared to fallow plots. Early- and late- terminated cereal rye reduced corn yields by 55 to 67% (5,173 to 7,116 kg ha^-1) compared to canola or fallow plots. In soybean, cereal rye and canola reduced early season weed biomass by 73 to 88% compared to fallow plots. Cereal rye and canola reduced horseweed emergence in 2017 and 2018 by 16 to 67 % compared to fallow plots. In 2017, both cover crop and termination timing influenced giant ragweed emergence. Early- and late- terminated cover crop plots reduced giant ragweed emergence by 50 to 76% compared to fallow plots. In 2018, cover crop termination timing influenced soybean yield. Late-terminated plots reduced yields by 48% compared to early-terminated plots. Results from this study suggest that cereal rye and canola planted at these rates can be effective for weed suppression prior to corn and soybeans, however, yield loss in both corn and soybean is expected. </p><p>Reports from Indiana in 2015 suggested that growers planting canola as a cover crop were experiencing difficulties when terminating with glyphosate prior to corn and soybean production. This suggests the utilization of inadequate herbicide programs, or perhaps a seed contamination event containing glyphosate resistant canola. Field experiments were conducted in 2016 and 2017 to determine the most effective herbicide treatment for terminating glyphosate resistant canola in Indiana, and to quantify how these herbicide programs influence corn yield. Canola was planted in early September and herbicide treatments were applied in the spring three weeks before corn planting. Visual ratings of control and above-ground biomass reduction were collected 21 days after treatment (DAT). The highest control of canola occurred following the application of paraquat + saflufenacil + 2,4-D or metribuzin, resulting in 88 to 94% control. These control ratings are supported by applications with paraquat + saflufenacil + 2,4-D or metribuzin resulting in 88 to 97% biomass reduction. Auxin herbicides alone provided very poor control, less than 41% at both locations. In general, saflufenacil-containing herbicide treatments provided the highest control of canola compared to mesotrione or atrazine. Herbicide treatments had no effect on corn grain yield.</p><br><p></p>

Increasing food, feed, fiber, biofuel production on decreasing amounts of arable land while simultaneously enhancing ecosystem services is challenging. Strategic inclusion of winter rye (<i>Secale cereale</i>) for biomass, silage, grain and Kura clover (<i>Trifolium ambiguum</i>) living mulch into existing Midwestern cropping systems may offer alternative economic income for farmers without displacing or reducing yields of primary crops. Research was conducted at the Purdue Water Quality Field Station (WQFS) where net balances of water, carbon, nitrogen, and radiation can be measured, and greenhouse gas (GHG) emissions are monitored. The agronomic performance of a corn-soybean rotation and continuous corn (controls) were compared to novel systems that included the use of rye cover cropping and Kura clover co-cropping. Rye was harvested for biomass/silage at heading immediately followed by corn or soybean planting. Continuous corn receiving 69 kg N ha^-1was planted into an establishment of Kura clover sod. Controls included these same systems without the rye or clover. GHG samples were taken via the static chamber method and tile-drained water sub-samples were collected, analyzed for nitrate, and load losses calculated. Biomass composition was determined and used to calculate herbage theoretical ethanol (EtOH) yields. Cereal rye did not significantly decrease corn or soybean grain yield. Averaged across years, Kura clover significantly depressed corn grain yields by nearly 70%. Kura clover significantly reduced flow-weighted tile drainage nitrate (NO₃^-) concentrations, however cereal rye did not. Reductions in flow-weighted tile drainage nitrate (NO₃^-) concentrations were found to largely occur during Quarter two (April, May, June). Cover crops did not significantly reduce annual tile drained NO₃^- load losses in most cases, however, they did significantly reduce annual N₂O emissions. Cumulative annual CH₄ emissions were not significantly altered. Annual CO₂emissions were higher after the introduction of Kura clover and not significantly altered following the introduction of cereal rye. Averaged across years, theoretical ethanol yields in the Kura clover system produced 2,752 L EtOH ha^-1, whereas EtOH production in cereal rye systems ranged from 3,245 to 4,210 L EtOH ha^-1. Theoretical ethanol yields of continuous corn and rotational controls ranged from 2,982 to 3505 L EtOH ha^-1 for these same systems without the cereal rye of Kura clover. These data suggest that a multipurpose approach to cover crop inclusion can provide both environmental and economic advantages worthy of consideration.

Cover crop use provides a myriad of benefits to soil health. Despite strong agronomic evidence of the benefits of using cover crops, farmers have been slow to adopt cover crop systems. Surveys show that this is due to a lack of understanding on how cover crop use will impact the farm, and limited economic analysis on the effects of cover crop use on the farm. <div> In this thesis, a variable-rate nitrogen study was analyzed to determine the relationship between applied nitrogen fertilizer and corn yields, and how a cover crop treatment impacts that relationship. Data were obtained from a case farm in Central Indiana. Production information was then translated into a partial budget to see how the use of the different cover crop treatments impacted net return per acre for corn production on the farm. Net returns were analyzed using both historical corn and nitrogen prices and stochastic modelling.</div><div> Results showed that the final impact on farm net return per acre associated with adoption of a cover crop system varies among cover crop species. Implementing annual rye resulted in a negative change to net return; while cereal rye and an oats and radish blend resulted in a positive change to net return. When additional benefits of cover crop use; such as drought tolerance, carbon content, and erosion reduction; are included, all three cover crop species resulted in a substantial increase in net return. This information will be of interest to farmers as a source to draw upon when making decisions regarding their own farms. Further research is needed to fully understand the relationship between cover crop use and farm profitability, particularly for farms at the early stages of adoption.</div>