In recent years, space-time block coding (STBC) has emerged as an effective transmit-diversity technique to combat the detrimental effects of channel fading. In addition to STBC, high-order modulation schemes will be used in future wireless communication systems aiming to provide ubiquitous-broadband wireless access. Hence, advanced receiver schemes are necessary to achieve high performance. In this thesis, advanced and computationally-efficient receiver schemes are investigated and developed for single-carrier space-time (ST) block-coded transmissions over frequency-selective fading (FSF) channels. First, we develop an MMSE-based turbo equalization scheme for Alamouti ST block-coded systems. A semi-analytical method to estimate the bit error rate (BER) is devised. Our results show that the proposed turbo equalization scheme offers significant performance improvements over one-pass equalization. Second, we analyze the convergence behavior of the proposed turbo equalization scheme for Alamouti ST block-coded systems using the extrinsic information transfer (EXIT)-band chart technique. Third, burst-wise (BW)-STBC is applied for uplink transmission over FSF channels in block-spread-CDMA systems with multiuser interference-free reception. The performances of different decision feedback sequence estimation (DFSE) schemes are investigated. A new scheme combining frequency-domain (FD) linear equalization and modified unwhitened-DFSE is proposed. The proposed scheme is very promising as the error-floor behavior observed in the existing unwhitened DFSE schemes is eliminated. Fourth, we develop a FD-MMSE-based turbo equalization scheme for the downlink of ST block-coded CDMA systems. We adopt BW-STBC instead of Alamouti symbol-wise (SW)-STBC considered for WCDMA systems and demonstrate its superior performance in FSF channels. Block spreading is shown to be more desirable than conventional spreading to improve performance using turbo equalization. We also devise approximate implementations (AprxImpls) that offer better trade-offs between performance and complexity. Semi-analytical upper bounds on the BER are derived. Fifth, turbo multicode detection is investigated for ST block-coded downlink transmission in DS-CDMA systems. We propose symbol-by-symbol and chip-by-chip FD-MMSE-based multicode detectors. An iterative channel estimation scheme is also proposed. The proposed turbo multicode detection scheme offers significant performance improvements compared with non-iterative multicode detection. Finally, the impact of channel estimation errors on the performance of MMSE-based turbo equalization in ST block-coded CDMA systems is investigated.

In recent years, space-time block coding (STBC) has emerged as an effective transmit-diversity technique to combat the detrimental effects of channel fading. In addition to STBC, high-order modulation schemes will be used in future wireless communication systems aiming to provide ubiquitous-broadband wireless access. Hence, advanced receiver schemes are necessary to achieve high performance. In this thesis, advanced and computationally-efficient receiver schemes are investigated and developed for single-carrier space-time (ST) block-coded transmissions over frequency-selective fading (FSF) channels. First, we develop an MMSE-based turbo equalization scheme for Alamouti ST block-coded systems. A semi-analytical method to estimate the bit error rate (BER) is devised. Our results show that the proposed turbo equalization scheme offers significant performance improvements over one-pass equalization. Second, we analyze the convergence behavior of the proposed turbo equalization scheme for Alamouti ST block-coded systems using the extrinsic information transfer (EXIT)-band chart technique. Third, burst-wise (BW)-STBC is applied for uplink transmission over FSF channels in block-spread-CDMA systems with multiuser interference-free reception. The performances of different decision feedback sequence estimation (DFSE) schemes are investigated. A new scheme combining frequency-domain (FD) linear equalization and modified unwhitened-DFSE is proposed. The proposed scheme is very promising as the error-floor behavior observed in the existing unwhitened DFSE schemes is eliminated. Fourth, we develop a FD-MMSE-based turbo equalization scheme for the downlink of ST block-coded CDMA systems. We adopt BW-STBC instead of Alamouti symbol-wise (SW)-STBC considered for WCDMA systems and demonstrate its superior performance in FSF channels. Block spreading is shown to be more desirable than conventional spreading to improve performance using turbo equalization. We also devise approximate implementations (AprxImpls) that offer better trade-offs between performance and complexity. Semi-analytical upper bounds on the BER are derived. Fifth, turbo multicode detection is investigated for ST block-coded downlink transmission in DS-CDMA systems. We propose symbol-by-symbol and chip-by-chip FD-MMSE-based multicode detectors. An iterative channel estimation scheme is also proposed. The proposed turbo multicode detection scheme offers significant performance improvements compared with non-iterative multicode detection. Finally, the impact of channel estimation errors on the performance of MMSE-based turbo equalization in ST block-coded CDMA systems is investigated.

In recent years, space-time block coding (STBC) has emerged as an effective transmit-diversity technique to combat the detrimental effects of channel fading. In addition to STBC, high-order modulation schemes will be used in future wireless communication systems aiming to provide ubiquitous-broadband wireless access. Hence, advanced receiver schemes are necessary to achieve high performance. In this thesis, advanced and computationally-efficient receiver schemes are investigated and developed for single-carrier space-time (ST) block-coded transmissions over frequency-selective fading (FSF) channels. First, we develop an MMSE-based turbo equalization scheme for Alamouti ST block-coded systems. A semi-analytical method to estimate the bit error rate (BER) is devised. Our results show that the proposed turbo equalization scheme offers significant performance improvements over one-pass equalization. Second, we analyze the convergence behavior of the proposed turbo equalization scheme for Alamouti ST block-coded systems using the extrinsic information transfer (EXIT)-band chart technique. Third, burst-wise (BW)-STBC is applied for uplink transmission over FSF channels in block-spread-CDMA systems with multiuser interference-free reception. The performances of different decision feedback sequence estimation (DFSE) schemes are investigated. A new scheme combining frequency-domain (FD) linear equalization and modified unwhitened-DFSE is proposed. The proposed scheme is very promising as the error-floor behavior observed in the existing unwhitened DFSE schemes is eliminated. Fourth, we develop a FD-MMSE-based turbo equalization scheme for the downlink of ST block-coded CDMA systems. We adopt BW-STBC instead of Alamouti symbol-wise (SW)-STBC considered for WCDMA systems and demonstrate its superior performance in FSF channels. Block spreading is shown to be more desirable than conventional spreading to improve performance using turbo equalization. We also devise approximate implementations (AprxImpls) that offer better trade-offs between performance and complexity. Semi-analytical upper bounds on the BER are derived. Fifth, turbo multicode detection is investigated for ST block-coded downlink transmission in DS-CDMA systems. We propose symbol-by-symbol and chip-by-chip FD-MMSE-based multicode detectors. An iterative channel estimation scheme is also proposed. The proposed turbo multicode detection scheme offers significant performance improvements compared with non-iterative multicode detection. Finally, the impact of channel estimation errors on the performance of MMSE-based turbo equalization in ST block-coded CDMA systems is investigated. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate

<p> This thesis investigates the application of multiple model estimation algorithms to the problem of channel equalization for digital data transmission and channel tracking for space-time block coded systems with non-Gaussian additive noise. Recently, a network of Kalman filters (NKF) has been reported for the equalization of digital communication channels based on the approximation of the a posteriori probability density function of a sequence of delayed symbols by a weighted Gaussian sum. A serious drawback of this approach is that the number of Gaussian terms in the sum increases exponentially through iterations. In this thesis, firstly, we have shown that the NKF-based equalizer can be further improved by considering the interactions between the parallel filters in an efficient way. To this end, we take resort to the Interacting Multiple Model (IMM) estimator widely used in the area of multiple target tracking. The IMM is a very effective approach when the system exhibits discrete uncertainties in the dynamic or measurement model as well as continuous uncertainties in state values. A computationally feasible implementation based on a weighted sum of Gaussian approximation of the density functions of the data signals is introduced. Next, we present an adaptive multiple model blind equalization algorithm based on the IMM estimator to estimate the channel and the transmitted sequence corrupted by intersymbol interference and noise. It is shown through simulations that the proposed IMM-based equalizer offers substantially improved performance relative to the blind equalizer based on a (static or non-interacting) network of extended Kalman filters. It obviates the exponential growth of the state complexity caused by increasing channel memory length. The proposed approaches avoid the exponential growth of the number of terms used in the weighted Gaussian sum approximation of the plant noise making it practical for real-time processing.</p> <p> Finally, we consider the problem of channel estimation and tracking for space-time block coded systems contaminated by additive non-Gaussian noise. In many practical wireless channels in which space-time block coding techniques may be applied, the ambient noise is likely to have an impulsive component that gives rise to larger tail probabilities than is predicted by the Gaussian model. Although Kalman filters are often used in practice to track the channel variation, they are notoriously sensitive to heavy-tailed outliers and model mismatches resulting from the presence of impulsive noise. Non-Gaussian noise environments require the modification of standard filters to perform acceptably. Based on the coding/decoding technique, we propose a robust IMM algorithm approach in estimating time-selective fading channels when the measurements are perturbed by the presence of impulsive noise. The impulsive noise is modeled by a two terms Gaussian mixture distribution. Simulations demonstrate that the proposed method yields substantially improved performance compared to the conventional Kalman filter algorithm using the clipping or localization approaches to handle impulses in the observation. It is also shown that IMM-based approach performs robustly even when the prior information about the impulsive noise is not known exactly.</p> / Thesis / Master of Applied Science (MASc)

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / High data rate communication between airborne vehicles and ground stations over the bandwidth constrained Aeronautical Telemetry channel is attributed to the development of bandwidth efficient Advanced Range Telemetry (ARTM) waveforms. This communication takes place over a multipath channel consisting of two components - a line of sight and one or more ground reflected paths which result in frequency selective fading. We concentrate on the ARTM SOQPSKTG transmit waveform suite and decode information bits using the reduced complexity Viterbi algorithm. Two different methodologies are proposed to implement reduced complexity Viterbi decoders in multipath channels. The first method jointly equalizes the channel and decodes the information bits using the reduced complexity Viterbi algorithm while the second method utilizes the minimum mean square error equalizer prior to applying the Viterbi decoder. An extensive numerical study is performed in comparing the performance of the above methodologies. We also demonstrate the performance gain offered by our reduced complexity Viterbi decoders over the existing linear receiver. In the numerical study, both perfect and estimated channel state information are considered.

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / In this paper we describe a new method that is applicable to mitigating both multipath interference and adjacent channel interference (ACI) in aeronautical telemetry applications using ARTM Tier-1 waveforms. The proposed method uses a linear equalizer that is derived using Kalman filtering theory, which has been used for channel equalization for high-speed communication systems. We illustrate the proposed method with numerical examples obtained from simulations that show the bit error rate performance (BER) for different modulation schemes.

The division of computer engineering at Linköping’s university is currentlydeveloping an innovative parallel DSP processor architecture called ePUMA. Onepossible future purpose of the ePUMA that has been thought of is to implement itin base stations for mobile communication. In order to investigate the performanceand potential of the ePUMA as a processing unit in base stations, a model of theLTE physical layer uplink receiving chain has been simulated in Matlab and thenpartially mapped onto the ePUMA processor.The project work included research and understanding of the LTE standard andsimulating the uplink processing chain in Matlab for a transmission bandwidth of5 MHz. Major tasks of the DSP implementation included the development of a300-point FFT algorithm and a channel equalization algorithm for the SIMD unitsof the ePUMA platform. This thesis provides the reader with an introduction tothe LTE standard as well as an introduction to the ePUMA processor. Furthermore,it can serve as a guidance to develop mixed point radix FFTs in general orthe 300 point FFT in specific and can help with a basic understanding of channelequalization. The work of the thesis included the whole developing chain from understandingthe algorithms, simplifying and mapping them onto a DSP platform,and testing and verification of the results.

Nowadays, several studies are launched for the design of reliable and safe communications systems that introduce Unmanned Aerial Vehicle (UAV), this paves the way for UAV communication systems to play an important role in a lot of applications for non-segregated military and civil airspaces. Until today, rules for integrating commercial UAVs in airspace still need to be defined, the design of secure, highly reliable and cost effective communications systems still a challenging task. This thesis is part of this communication context. Motivated by the rapid growth of UAV quantities and by the new generations of UAVs controlled by satellite, the thesis aims to study the various possible UAV links which connect UAV/aircraft to other communication system components (satellite, terrestrial networks, etc.). Three main links are considered: the Forward link, the Return link and the Mission link. Due to spectrum scarcity and higher concentration in aircraft density, spectral efficiency becomes a crucial parameter for largescale deployment of UAVs. In order to set up a spectrally efficient UAV communication system, a good understanding of transmission channel for each link is indispensable, as well as a judicious choice of the waveform. This thesis begins to study propagation channels for each link: a mutipath channels through radio Line-of-Sight (LOS) links, in a context of using Meduim Altitude Long drones Endurance (MALE) UAVs. The objective of this thesis is to maximize the solutions and the algorithms used for signal reception such as channel estimation and channel equalization. These algorithms will be used to estimate and to equalize the existing muti-path propagation channels. Furthermore, the proposed methods depend on the choosen waveform. Because of the presence of satellite link, in this thesis, we consider two low-papr linear waveforms: classical Single-Carrier (SC) waveform and Extented Weighted Single-Carrier Orthogonal Frequency-Division Multiplexing (EW-SC-OFDM) waveform. channel estimation and channel equalization are performed in the time-domain (SC) or in the frequency-domain (EW-SC-OFDM). UAV architecture envisages the implantation of two antennas placed at wings. These two antennas can be used to increase diversity gain (channel matrix gain). In order to reduce channel equalization complexity, the EWSC- OFDM waveform is proposed and studied in a muti-antennas context, also for the purpose of enhancing UAV endurance and also increasing spectral efficiency, a new modulation technique is considered: Spatial Modulation (SM). In SM, transmit antennas are activated in an alternating manner. The use of EW-SC-OFDM waveform combined to SM technique allows us to propose new modified structures which exploit exces bandwidth to improve antenna bit protection and thus enhancing system performances.

<p>In this thesis, a single carrier ATSC DTV baseband transmitter, part of the receiver(including channel estimator and channel equalizer), were modeled. Since multi-pathinduced ISI (inter symbol interference) is the most significant impact on theperformance of single carrier DTV reception, modeling and implementation of singlecarrier channel estimator and channel equalizer have been the focus of the thesis. Westarted with the investigation of channel estimation methods. Afterwards, severalchannel estimators and equalizers were modeled and the performance of each channelequalization methods in different scenarios was evaluated. Our results show that thefrequency domain equalizer can achieve low computing cost and handle long delaypaths. Another important issue to be considered in block equalization is Inter-BlockInterference (IBI). The impact of IBI was investigated via behavior modeling. In lastpart of our thesis, two methods for IBI cancellation are compared and the proposal forhardware implementation was given.</p>

In this thesis, a single carrier ATSC DTV baseband transmitter, part of the receiver(including channel estimator and channel equalizer), were modeled. Since multi-pathinduced ISI (inter symbol interference) is the most significant impact on theperformance of single carrier DTV reception, modeling and implementation of singlecarrier channel estimator and channel equalizer have been the focus of the thesis. Westarted with the investigation of channel estimation methods. Afterwards, severalchannel estimators and equalizers were modeled and the performance of each channelequalization methods in different scenarios was evaluated. Our results show that thefrequency domain equalizer can achieve low computing cost and handle long delaypaths. Another important issue to be considered in block equalization is Inter-BlockInterference (IBI). The impact of IBI was investigated via behavior modeling. In lastpart of our thesis, two methods for IBI cancellation are compared and the proposal forhardware implementation was given.