Spelling suggestions: "subject:"chemicallycombined medium"" "subject:"chemicallyassisted medium""
1 |
Estabelecimento de um meio quimicamente definido para desenvolvimento de Haemophilus influenzae tipo b e produção de polissacarídeo capsular. / Establishment of a chemically defined medium for development of Haemophilus influenzae type b and capsular polysaccharide production.Paiva, Paola Rizzo de 28 September 2016 (has links)
Haemophilus influenzae b (Hib) é uma bactéria patogênica causadora de pneumonia e meningite. Sua cápsula polissacarídica (PRP) é considerada como principal fator de virulência e utilizada como antígeno vacinal. Hib é fastidioso e requer micronutrientes para seu desenvolvimento. A finalidade deste trabalho é estabelecer o meio quimicamente definido para desenvolvimento de Hib e produção de PRP. Inicialmente, definiu-se um meio a partir de dados da literatura. Este meio foi estudado através do delineamento de Plackett-Burman de 44 ensaios, obtendo-se valores máximos de DO540nm de 5,0 UA, e 227,7 mg/L de PRP. A análise estatística revelou que EDTA, NH4Cl, Cys e PVA podem ser removidos do meio sem impactar os parâmetros estudados e que Glm, Hipoxantina, Inosina, Tiamina, Hemina e Tween 80 apresentam efeito significativo positivo para produção de PRP. Analisando os meios estudados, foi possível verificar que a composição do E44 possibilitou produzir o PRP a US$ 16,50/g, sendo considerado o meio quimicamente definido estabelecido neste trabalho. / Haemophilus influenzae b (Hib) is a pathogenic bacterium that causes pneumonia and meningitis. Its capsular polysaccharide (PRP) is considered as a major virulence factor and used as vaccine antigen. Hib is fastidious and requires micronutrients for its development. The purpose of this study is to establish the chemically defined medium for Hib development and PRP production. Initially, a medium was defined based in the literature. This medium was studied by the Plackett-Burman design of 44 trials, achieving maximum values of DO540nm of 5.0 AU and 227.7 mg / L of PRP. Statistical analysis revealed that EDTA, NH4Cl, Cys and PVA can be removed from the medium without impacting the parameters studied and Glm, Hypoxanthine, Inosine, Thiamine, Tween 80 and Hemin exhibit significant positive effect on the PRP production. Analyzing the studied media, it was possible to verify that the composition of E44 enabled to produce PRP to $ 16.50/g, being considered the chemically defined medium established in this work.
|
2 |
Estabelecimento de um meio quimicamente definido para desenvolvimento de Haemophilus influenzae tipo b e produção de polissacarídeo capsular. / Establishment of a chemically defined medium for development of Haemophilus influenzae type b and capsular polysaccharide production.Paola Rizzo de Paiva 28 September 2016 (has links)
Haemophilus influenzae b (Hib) é uma bactéria patogênica causadora de pneumonia e meningite. Sua cápsula polissacarídica (PRP) é considerada como principal fator de virulência e utilizada como antígeno vacinal. Hib é fastidioso e requer micronutrientes para seu desenvolvimento. A finalidade deste trabalho é estabelecer o meio quimicamente definido para desenvolvimento de Hib e produção de PRP. Inicialmente, definiu-se um meio a partir de dados da literatura. Este meio foi estudado através do delineamento de Plackett-Burman de 44 ensaios, obtendo-se valores máximos de DO540nm de 5,0 UA, e 227,7 mg/L de PRP. A análise estatística revelou que EDTA, NH4Cl, Cys e PVA podem ser removidos do meio sem impactar os parâmetros estudados e que Glm, Hipoxantina, Inosina, Tiamina, Hemina e Tween 80 apresentam efeito significativo positivo para produção de PRP. Analisando os meios estudados, foi possível verificar que a composição do E44 possibilitou produzir o PRP a US$ 16,50/g, sendo considerado o meio quimicamente definido estabelecido neste trabalho. / Haemophilus influenzae b (Hib) is a pathogenic bacterium that causes pneumonia and meningitis. Its capsular polysaccharide (PRP) is considered as a major virulence factor and used as vaccine antigen. Hib is fastidious and requires micronutrients for its development. The purpose of this study is to establish the chemically defined medium for Hib development and PRP production. Initially, a medium was defined based in the literature. This medium was studied by the Plackett-Burman design of 44 trials, achieving maximum values of DO540nm of 5.0 AU and 227.7 mg / L of PRP. Statistical analysis revealed that EDTA, NH4Cl, Cys and PVA can be removed from the medium without impacting the parameters studied and Glm, Hypoxanthine, Inosine, Thiamine, Tween 80 and Hemin exhibit significant positive effect on the PRP production. Analyzing the studied media, it was possible to verify that the composition of E44 enabled to produce PRP to $ 16.50/g, being considered the chemically defined medium established in this work.
|
3 |
A Comparative Analysis of the Biomechanics and Biochemistry of Cell-Derived and Cell-Remodeled Matrices: Implications for Wound Healing and Regenerative MedicineAhlfors, Jan-Eric Wilhelm 03 May 2004 (has links)
The purpose of this research was to study the synthesis and remodeling of extracellular matrix (ECM) by fibroblasts with special emphasis on the culture environment (media composition and initial ECM composition) and the resulting mechanical integrity of the ECM. This was investigated by culturing fibroblasts for 3 weeks in a variety of culture conditions consisting of collagen gels, fibrin gels, or media permissive to the self-production of ECM (Cell-Derived Matrix), and quantifying the mechanics of the resulting ECM. The mechanical characteristics were related to the biochemistry of the resulting ECM, notably in terms of collagen accumulation and collagen fibril diameters. The ultimate tensile strength (UTS) of the collagen gels and fibrin gels at the end of the 3-week period was 168.5 ± 43.1 kPa and 133.2 ± 10.6 kPa, respectively. The ultimate tensile strength of the cell-derived matrices was 223.2 ± 9 kPa, and up to 697.1 ± 36.1 kPa when cultured in a chemically-defined medium that was developed for the rapid growth of matrix in a more defined environment. Normalizing the strength to collagen density resulted in a UTS / Collagen Density in these groups of 6.4 ± 1.9 kPa/mg/cm3, 25.9 ± 2.4 kPa/mg/cm3, 14.5 ± 1.1 kPa/mg/cm3, and 40.0 ± 1.9 kPa/mg/cm3, respectively. Cells were synthetically more active when they produced their own matrix than when they were placed within gels. The resulting matrix was also significantly stronger when it was self-produced than when the cells rearranged the matrix within gels that corresponded to a significantly larger fraction of non-acid and pepsin extractable collagen. These studies indicate that cell-derived matrices have potential both as in vitro wound healing models and as soft connective tissue substitutes.
|
4 |
Développement d'un nouveau produit d'ingenierie tissulaire osseuse à base de polymères et de cellules souche du tissu adipeux / Development of a new bone tissue engineering product based on polymers and adipose derived stem cellsLalande, Charlotte 23 November 2011 (has links)
L’ingénierie du tissu osseux vise à concevoir un substitut tissulaire associant des cellules ostéoprogénitrices à une matrice tridimensionnelle capable de promouvoir la reconstruction osseuse, ouvrant la voie au développement de thérapeutiques substitutives à la pratique de la greffe dont les limitations sont bien connues.Le but de ce travail a été de développer un nouveau produit d’ingénierie tissulaire (PIT) destiné à la régénération osseuse constitué i) d’une matrice tridimensionnelle poreuse constituée de polysaccharides naturels biodégradables, ii) de cellules souches adultes issues du tissu adipeux humain (ADSCs) et d’identifier les conditions de culture optimales permettant le développement d’un produit fonctionnel pour une utilisation clinique. Nos résultats montrent que l’architecture et la composition de la matrice macroporeuse polysaccharidique permet de guider la différenciation ostéoblastique des ADSCs, en l’absence de facteurs ostéogéniques, et notamment en conditions de culture dynamique, grâce à l’organisation cellulaire en agrégats promouvant les interactions cellulaires. Les ADSCs peuvent être marquées à l’aide de nanoparticules superparamagnétiques et suivies in vivo de façon non invasive par imagerie par résonnance magnétique (IRM) au sein des matrices après leur implantation en site sous-cutané chez la souris. Les images IRM montrent que le matériau permet de délivrer une partie des cellules au niveau du site d’implantation participant probablement à un processus de réparation tissulaire. Enfin, en vue d’applications cliniques, un milieu de culture sans sérum répondant aux conditions GMP (Good Manufacturing Practices) pour la différenciation ostéoblastique a été développé par un industriel et validé au cours de ce travail de thèse.En conclusion de ces travaux, l’association d’une matrice macroporeuse composée de polysaccharides avec des ADSCs dans des conditions de culture spécifiques, en conditions dynamiques, semble pertinente et prometteuse pour des applications cliniques en ingénierie du tissu osseux. / Bone tissue engineering may associate osteoprogenitor cells to a tridimensional scaffold that can promote tissue reconstruction in order to replace bone grafting strategies whose limitations are well known. This study aims to develop a new tissue-engineered construct for bone regeneration constituted by i) a tridimensional polysaccharide-based scaffold, ii) adult stem cells extracted from human adipose tissue and identify the best culture conditions needed to develop a functional construct for clinical use. Our results show that this macroporous scaffold offers, without any osteoinductive factors, a suitable architecture and composition for driving osteoblastic differentiation of ADSCs especially when placing the tissue-engineered construct in dynamic conditions, thanks to cell aggregate conformation promoting cell-to-cell interactions. Thanks to ADSCs labeling, the tissue-engineered construct can be tracked in vivo in a non invasive way by magnetic resonance imaging (MRI), after their subcutaneous implantation. Results evidenced that this scaffold behaves as a cell carrier for of holding in its own cell fraction and delivering another fraction to the site of implantation for inducing a better tissue regeneration process. Finally, a serum free medium meeting standards GMPs (Good Manufacturing Practices) has been developed for inducing ADSCs osteoblastic differentiation as a first step towards clinical application.In conclusion, this polysaccharide-based scaffold associated with ADSCs, cultured under low fluid flow in a new bioreactor device, could be a relevant and promising tissue engineered construct for bone tissue engineering applications.
|
Page generated in 0.081 seconds