1 |
Contribution of surface bound positive charge towards the conversion of N-H to N-Cl on poly (ethylene terephthalate) and the antibacterial activity of the resulting N-ClKaur, Rajbir 02 September 2016 (has links)
As a continued study on combined use of different antibacterial chemistries, N-chloramine and short chain Quaternary ammonium compound (QAC) were immobilized on modified poly (ethylene terephthalate) (PET) surface in various ratios via “click” chemistry. In this study, contribution of surface bound QAC to the conversion of cyclic and acyclic N-H to N-Cl, fastest recharging chlorination as well as the most effective antibacterial efficacy was investigated. Surface bound positive charge at the density of 8.4x1016charges/cm2 achieved highest equilibrium conversion and facilitated a nine-fold increase in conversion of sterically hindered acyclic N-H to N-Cl from 0.39 to 3.92%. Within the range of 2.8x1016 to 8.4x1016charges/cm2, highest active chlorine loading within first five minutes of chlorination was observed on sample loaded with 4.6x1016charges/cm2.As it comes to PET surface grafted with a cyclic N-chloramine precursor, the presence of 2x1016charges/cm2 enabled a five-fold increase in the conversion of cyclic N-H to N-Cl. The highest biocidal efficacy was observed for sample loaded with cyclic N-chloramine/QAC 17.2:10 which presented total kill of E.coli (5.8 log reduction) in 10 minutes compared to 1.9 log reduction for other ratios (22.8/10, 75.5/10) tested at a similar level of active chlorine(223±6ppm respectively). / October 2016
|
2 |
Novel N-chloramine based antibacterial and non-adherent burn wound dressingsNing, Chenxi 30 January 2014 (has links)
A burn is a type of injury to the skin caused by fire, heat, electricity, chemicals, radiation or friction. It occurs in all age groups. Burn wound infection remains the leading cause of skin graft failure and one of the leading causes of burn injury related mortality. Dressings impregnated with silver compounds are the mainstay of treatment for burn wounds to prevent or combat the infection. However, most commercially available silver based wound dressings cause trauma upon removal because of adhesion to the wound bed. A recent study has shown that burn dressing related pain is linked to more severe depressive and posttraumatic stress symptoms. Furthermore, emerging resistance associated with silver based wound dressings is a growing concern. Organic N-chloramines have been in clinical use for over 180 years thanks to their effectiveness toward a broad spectrum of microorganisms, and no resistance has been yet reported. This study aimed to develop an “ideal” wound dressing with both antibacterial and atraumatic properties. Poly(ethylene terephthalate) (PET) fabrics are among the most representative base materials in burn wound dressings and thus were chosen as the substrate. Specifically, a very thin layer of polyacrylamide (PAm) hydrogel was deposited onto the surface of PET fabric via plasma activation and photopolymerization. The treated PET fabric (termed as “PET-PAm”) was characterized with attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and water contact angle measurement. We adapted an in vitro wet-gelatin adherence model to evaluate the effect of hydrogel deposition on reducing the adherence of PET. The deposited hydrogel layer was found to lower the adherence of PET fabrics. The peeling energy of PET decreased drastically from 2231.5 J/m2 to nearly 250 J/m2 after the deposition of hydrogel. On the other hand, we have also synthesized a series of new “composite” biocides with both N-chloramine and quaternary ammonium (QA) moieties. Those “composite” biocides exert boosted killing efficiency against methicillin-resistant Staphylococcus aureus (MRSA) and multi-drug resistant (MDR) Pseudomonas aeruginosa. The deposited hydrogel layer can also serve as the reservoir for the loading of the novel N-chloramine based “composite” biocides, to achieve a both non-adherent and antibacterial wound dressing.
|
3 |
Interactions Between Copper and Chlorine Disinfectants: Chlorine Decay, Chloramine Decay and Copper PittingNguyen, Caroline Kimmy 09 December 2005 (has links)
Interactions between copper and chlorine disinfectants were examined from the perspective of disinfectant decay and copper pitting corrosion. Sparingly soluble cupric hydroxide catalyzed the rapid decay of free chlorine, which in turn, led to production of less soluble and more crystalline phases of cupric hydroxide. The catalytic activity of the cupric hydroxide was retained over multiple cycles of chlorine dosing.
Experiments with chloramine revealed that copper species could also trigger rapid loss of chloramine disinfectant. In copper pipes, loss of free chlorine and chloramine were both rapid during stagnation. Reactivity of the copper to the disinfectants was retained for weeks. Phosphate tended to decrease the reactivity between the copper pipe and chlorine disinfectants.
A novel, inexpensive and real-time test to monitor copper pitting corrosion was developed. In a normal pipe, it is not possible to measure the electron flow or pitting current from the pit anode to the cathode. But a new method was developed that can form an active pit on the tip of a copper wire, which in turn, allows the pitting current to be measured. Preliminary experiments presented herein have proven that this technique has promise in at least one water condition known to cause pitting. The method also quickly predicted that high levels of orthophosphate could stop pitting attack in this water, whereas low levels would tend to worsen pitting. Future research should be conducted to examine this technique in greater detail. / Master of Science
|
4 |
An Investigation of Nitrification Predictors and Factors in Two Full-Scale Drinking Water Distribution SystemsScott, Daniel January 2012 (has links)
The biologically-mediated process of nitrification can occur in chloraminated drinking water distribution systems. In this process, ammonia is oxidized to nitrite by ammonia-oxidizing bacteria (AOB) and archaea (AOA). In complete nitrification, nitrite is further converted to nitrate by nitrite-oxidizers; however, bacterial mediation of this step is less critical as a chemical-oxidation pathway also exists. The initial conversion of ammonia to nitrite is also more critical due to its role in the degradation of the disinfectant residual. Nitrification is affected by factors such as the concentrations of ammonia and total chlorine, the pH of the drinking water, and the temperature. The key consequence of distribution system nitrification is an accelerated decay of the disinfectant residual; it can also lead to increases in nitrite and nitrate, and a potential proliferation of heterotrophic bacteria.
The goal of this thesis is to enhance understanding of distribution system nitrification; one aspect to this goal is the evaluation of models for nitrification. The approach followed in this study was to collect water samples from two full-scale distribution systems in Southern Ontario. In the first phase, a sampling campaign was conducted at sites in these systems, with water samples being analyzed for parameters considered relevant to nitrification, such as the concentrations of nitrogen species affected by nitrification, the disinfectant residual, and the levels of ammonia-oxidizing microorganisms. In the second phase, batch tests were conducted with water from these same distribution systems.
In the course of the field sampling campaign some indications of nitrification were detected, but there were no severe nitrification episodes as indicated by major losses of the disinfectant or prolonged elevations in nitrite levels. On some occasions at some sites there were small rises in nitrite above baseline levels; moderate declines in total chlorine residual were also seen. Nitrifying microorganisms were present in most samples, as detected by both culture-based and molecular methods (PCR). The latter was able to distinguish AOA from AOB; both were detected in the systems included in this study, with AOB gene counts outnumbering those of AOA at most sites. Using Spearman non-parametric correlations, significant correlations were found between some parameters relevant to nitrification. Notably, AOB were found to be positively correlated with heterotrophic plate counts (HPC), reinforcing the latter's role as a useful indicator of microbial regrowth conditions in a distribution system. Also of interest is the negative correlation between total chlorine residual and levels of microorganisms, reminding drinking water professionals of the value of maintaining a stable disinfectant residual.
Batch testing investigations compared total chlorine decay curves between inhibited and uninhibited samples to provide insight into the microbial contribution to disinfectant decay. Four types of decay curves were identified, with qualitative differences in the microbial contribution to the disinfectant residual decay. Liquid chromatography with organic carbon detection (LC-OCD) was applied to investigate changes in the character of the dissolved organic carbon over the course of the batch tests. Based on the results of this study, it is recommended to evaluate the results of nitrification batch tests based on a visual identification of the curve type and calculation of the decay rates and critical threshold residual (CTR), rather than relying on the microbial decay factor alone to express the results.
An application of this work was in making comparisons to some models for nitrification proposed in the literature. The ultimate goal of these models is to provide drinking water system operators with a prediction of when nitrification episodes will occur so that action may be taken to avert them. The models considered in this study differ in their degree of complexity and in whether they are based on mechanistic considerations. The differences in the underlying principles and data required for analysis make these models suitable for different applications. The results of this evaluation support the use of the model of Fleming et al. (2005) in full-scale distribution systems and the use of the model by Yang et al. (2008) for research applications, while the other models considered can still offer some useful insights.
The results of this research can be applied to monitoring and operational practices in chloraminated distribution systems where nitrification is a potential concern. The correlations between parameters that have significance to distribution system nitrification that were found in this study, along with the modelling and batch testing evaluated in this work, can provide insight into predicting conditions favourable to nitrification and avoiding or averting nitrification episodes.
|
5 |
An Investigation of Nitrification Predictors and Factors in Two Full-Scale Drinking Water Distribution SystemsScott, Daniel January 2012 (has links)
The biologically-mediated process of nitrification can occur in chloraminated drinking water distribution systems. In this process, ammonia is oxidized to nitrite by ammonia-oxidizing bacteria (AOB) and archaea (AOA). In complete nitrification, nitrite is further converted to nitrate by nitrite-oxidizers; however, bacterial mediation of this step is less critical as a chemical-oxidation pathway also exists. The initial conversion of ammonia to nitrite is also more critical due to its role in the degradation of the disinfectant residual. Nitrification is affected by factors such as the concentrations of ammonia and total chlorine, the pH of the drinking water, and the temperature. The key consequence of distribution system nitrification is an accelerated decay of the disinfectant residual; it can also lead to increases in nitrite and nitrate, and a potential proliferation of heterotrophic bacteria.
The goal of this thesis is to enhance understanding of distribution system nitrification; one aspect to this goal is the evaluation of models for nitrification. The approach followed in this study was to collect water samples from two full-scale distribution systems in Southern Ontario. In the first phase, a sampling campaign was conducted at sites in these systems, with water samples being analyzed for parameters considered relevant to nitrification, such as the concentrations of nitrogen species affected by nitrification, the disinfectant residual, and the levels of ammonia-oxidizing microorganisms. In the second phase, batch tests were conducted with water from these same distribution systems.
In the course of the field sampling campaign some indications of nitrification were detected, but there were no severe nitrification episodes as indicated by major losses of the disinfectant or prolonged elevations in nitrite levels. On some occasions at some sites there were small rises in nitrite above baseline levels; moderate declines in total chlorine residual were also seen. Nitrifying microorganisms were present in most samples, as detected by both culture-based and molecular methods (PCR). The latter was able to distinguish AOA from AOB; both were detected in the systems included in this study, with AOB gene counts outnumbering those of AOA at most sites. Using Spearman non-parametric correlations, significant correlations were found between some parameters relevant to nitrification. Notably, AOB were found to be positively correlated with heterotrophic plate counts (HPC), reinforcing the latter's role as a useful indicator of microbial regrowth conditions in a distribution system. Also of interest is the negative correlation between total chlorine residual and levels of microorganisms, reminding drinking water professionals of the value of maintaining a stable disinfectant residual.
Batch testing investigations compared total chlorine decay curves between inhibited and uninhibited samples to provide insight into the microbial contribution to disinfectant decay. Four types of decay curves were identified, with qualitative differences in the microbial contribution to the disinfectant residual decay. Liquid chromatography with organic carbon detection (LC-OCD) was applied to investigate changes in the character of the dissolved organic carbon over the course of the batch tests. Based on the results of this study, it is recommended to evaluate the results of nitrification batch tests based on a visual identification of the curve type and calculation of the decay rates and critical threshold residual (CTR), rather than relying on the microbial decay factor alone to express the results.
An application of this work was in making comparisons to some models for nitrification proposed in the literature. The ultimate goal of these models is to provide drinking water system operators with a prediction of when nitrification episodes will occur so that action may be taken to avert them. The models considered in this study differ in their degree of complexity and in whether they are based on mechanistic considerations. The differences in the underlying principles and data required for analysis make these models suitable for different applications. The results of this evaluation support the use of the model of Fleming et al. (2005) in full-scale distribution systems and the use of the model by Yang et al. (2008) for research applications, while the other models considered can still offer some useful insights.
The results of this research can be applied to monitoring and operational practices in chloraminated distribution systems where nitrification is a potential concern. The correlations between parameters that have significance to distribution system nitrification that were found in this study, along with the modelling and batch testing evaluated in this work, can provide insight into predicting conditions favourable to nitrification and avoiding or averting nitrification episodes.
|
6 |
Development and Use of Microelectrodes to Evaluate Nitrification within Chloraminated Drinking Water System Biofilms, and the Effects of Phosphate as a Corrosion Inhibitor on Nitrifying BiofilmLee, Woo Hyoung January 2009 (has links)
No description available.
|
7 |
An Integrated Field-Scale Assessment of Chloramine Dynamics, By-Product Formation, and Nitrification ModelingAlexander, Matthew T. 30 September 2010 (has links)
No description available.
|
8 |
Corrosion in New Construction:Elevated Copper, Effects of Orthophosphate Inhibitors, and Flux Initiated Microbial GrowthGriffin, Allian Sophia 15 April 2010 (has links)
It is generally acknowledged that a variety of problems affecting aesthetics, health, and corrosivity of potable water can arise during installation of building plumbing systems. These include 'blue water', microbial infestation, and rapid loss of disinfectant residual, among other things. Frequently cited causes of the problems include metallic fines left in the plumbing lines from deburring, cutting and product fabrication; solder flux residuals (water soluble and petroleum based flux); and solvents for CPVC. Mechanistically, some materials such as flux contain high chloride, high ammonia and cause low pH, which can increase the corrosivity of water held in the lines. Indirect effects are also suspected to be important. For example, ammonia from flux and organic carbon from flux or PVC solvents can spur microbial growth, which in turn can reduce pH or otherwise increase corrosivity. Recent work has also demonstrated that problems with lead leaching to water from brass in modern plumbing can actually be worse in PVC/plastic than in copper systems, if certain types of microbes such as nitrifiers proliferate and drop pH. Some of the problems initiated by construction practices can persist indefinitely, causing higher levels of lead and copper in water, or longer term, contributing to failures of the plumbing system.
Blue water from high copper concentrations is a confounding problem that continues to arise in some locales of the United States. One public elementary school in Miami Dade County is experiencing blue water issues as manifested by blue ice cubes and sink staining. In addition to the aesthetic problems, copper levels are above the EPA's Copper Action Level of 1.3 ppm. Bottled water has been substituted for tap water consumption, which has created a financial burden. The pH of the school's water ranges from 7.15 - 7.5 and the school itself is located 1 ½ miles off the main distribution line resulting in a very low chlorine residual of between 0.06 mg/L Cl2 and 0.18 mg/L Cl2. On site water was shipped to Virginia Tech from Miami to be used in this study. Preliminary testing showed that an increase in the pH of the water would decrease copper leaching. Several pH's were tested which revealed that increasing the pH of the water to 8.5 would drop copper below 1.3 mg/L. When these recommendations were implemented at the school, the high alkalinity and calcium rich water caused calcite scales to form which clogged the chemical feed nozzles. Further bench scale testing indicated that adding 2 mg/L orthophosphate corrosion inhibitor would effectively decrease copper to a level that would comply with the EPA's Copper Action Limit.
Orthophosphate corrosion inhibitors are used by utilities to limit lead and copper corrosion from consumer's plumbing. An evaluation comparing the effects of both 100% orthophosphate inhibitor and orthophosphate/polyphosphate inhibitor blends was performed to study the effects they have on galvanic corrosion, metallic corrosion, microbial growth and the decay of chloramine disinfectant. On site water was sent to Virginia Tech from UNC for use in this bench scale study. The results from this study indicated that 100% orthophosphate inhibitor was the most effective corrosion inhibitor at decreasing metallic corrosion.
It has long been known that microbial activity can have significant effects on water quality. This study evaluated nitrifying and heterotrophic bacterial growth in water systems containing copper pipes, a common plumbing product, and flux which is used in soldering copper pipes together in new construction. There are several types of commercially available fluxes which are often used when soldering new pipes together. Flux ingredients vary and can include extremely high concentrations of ammonia, zinc, chloride, tin, copper and TOC. Flux containing high amounts of ammonia can be detrimental to water quality because it can accelerate the occurrence of nitrification, thus creating a cascading set of problems including, but not limited to, pH decrease and copper corrosion. The results from this case study indicated that flushing a pipe system can effectively decrease the high concentrations of flux present in a new construction system; however, high levels of ammonia from flux can create an environment in which nitrifiers may proliferate within the system.
Many water utilities in the United States are switching disinfection type from chlorine to chloramine due to the increased stability, longer residual time, and overall safety benefits of chloramine. Although chloramines have been found to be a desirable means for disinfection, chloramine decay is an issue of great concern because if the chloramine residual decays, it can leave a water system unprotected against microbial infestation. A preliminary examination of this issue was performed in a laboratory setting to evaluate the many components that effect the stability of chloramine decay, including alkalinity, phosphate, temperature, and various pipe materials. The results from this experiment revealed that temperature increase, pH increase, and aged tygon tubing all accelerated the rate of chloramine decay. / Master of Science
|
9 |
Comparison of the Use of Single and Multiple Oxidants on the Generation of Particulate Matter in Water Distribution Systems Derived from Groundwater Sources Containing Hydrogen Sulfide and Dissolved OrganicsMinnis, Rochelle J 08 November 2005 (has links)
Due to increasingly stringent regulations, concerns about disinfection byproduct formation, and the need for improved control of distribution system water quality, there has been a shift towards the use of alternative disinfectants and oxidants in the production of drinking water. Technologies that modify water chemistry, such as hydrogen peroxide, UV irradiation, chlorine and/or chloramines may result in the generation of mineral and organic precipitates. Turbidity provides an indirect measure of the presence of particles by evaluating the light scattering properties of water. Turbidity levels are currently not monitored or regulated in treated groundwater.
An important water quality parameter that influences groundwater quality is hydrogen sulfide. The control of sulfides in groundwater is of importance because its presence can cause odor and taste complaints, corrosion of pipes and other plumbing fixtures, and black-water problems in distribution systems (Levine et. al, 2004). In addition, sulfides can impose a significant oxidant demand and possibly interfere with disinfection treatments.
Characteristics of particles from untreated and treated groundwater were tested as part of a field study to evaluate alternative wellhead treatment approaches for controlling hydrogen sulfide. A 1 gallon per minute (gpm) pilot-plant was used to test several groundwater treatment scenarios. The chemicals tested included chlorine, monochloramine, and hydrogen peroxide either alone or in tandem. Photochemical oxidation was evaluated using UV and advanced oxidation was evaluated using hydrogen peroxide coupled with UV. Testing was conducted either on water pumped directly from the well at ambient (7.0-7.5), or pretreated with caustic soda to evaluate the impact of elevated pH (8.2) conditions. The formation of particles was quantified using turbidity, solids (total, dissolved and suspended), and particle counts before and after oxidation. The particulate matter was characterized using a particle size analyzer in conjunction with scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS).
Treatment systems that rely on in-line treatment lack mechanisms for particle removal, therefore particles generated through treatment are introduced into the distribution system. It is evident from this project that treatment systems should be optimized to prevent particle formation.
|
10 |
Formation of emerging DBPs from the chlorination and chloramination of seawater algal organic matter and related model compoundsNihemaiti, Maolida 05 1900 (has links)
Limited studies focused on reactions occurring during disinfection and oxidation processes of seawater. The aim of this work was to investigate disinfection by-products (DBPs) formation from the chlorination and chloramination of seawater algal organic matter and related model compounds. Simulated algal blooms directly growing in Red Sea, red tide samples collected during an algal bloom event and Hymenomonas sp. monoculture were studied as algal organic matter sources. Experiments were conducted in synthetic seawater containing bromide ion. A variety of DBPs was formed from the chlorination and chloramination of algal organic matter. Brominated DBPs (bromoform, DBAA, DBAN and DBAcAm) were the dominant species. Iodinated DBPs (CIAcAm and iodinated THMs) were detected, which are known to be highly toxic compared to their chlorinated or brominated analogues. Algal organic matter was found to incorporate important precursors of nitrogenous DBPs (N-DBPs), which have been reported to be more toxic than regulated THMs and HAAs. Isotopically-labeled monochloramine (15N- NH2Cl) was used in order to investigate the nitrogen source in N-DBPs. High formation of N-DBPs was found from Hymenomonas sp. sample in exponential growth phase, which was enriched in nitrogen-containing organic compounds. High inorganic nitrogen incorporation was found from the algal samples enriched in humic-like compounds. HAcAms formation was studied from chlorination and chloramination of amino acids. Asparagine, aspartic acid and other amino acids with an aromatic structure were found to
be important precursors of HAcAms and DCAN. Factors affecting HAcAms formation (Cl2/ amino acid molar ratio and pH) were evaluated. Studies on the formation kinetics of DCAcAm and DCAN from asparagine suggested a rapid formation of DCAcAm from organic nitrogen (amide group) and a slower incorporation of inorganic nitrogen coming from monochloramine to form DCAN. High amounts of DCAN and DCAcAm were detected from the chloramination of aromatic compounds (i.e., phenol and resorcinol) indicating that N-DBPs can also be formed from organic compounds without any organic nitrogen through the incorporation of inorganic nitrogen from monochloramine. Moreover, results from Hymenomonas sp., aromatic amino acids, and phenolic compounds suggested that aromatic compounds are highly reactive with monochloramine and a major fraction of DBP precursors.
|
Page generated in 0.0679 seconds