Ce travail de thèse porte sur les systèmes de communication radio-sur-fibre (RoF) aux fréquences millimétriques dans la gamme de fréquences 57-66 GHz et leur génération par voie optique. La technique utilisée repose sur l’emploi de diodes laser à verrouillage de modes à boites quantiques. Au cours de cette thèse, plusieurs études ont été effectuées : la première porte sur la capacité d’intégrer ces types des lasers dans des systèmes de communication RoF avec leurs performances sous modulation directe ou externe. La deuxième étude a été consacrée aux effets de la propagation de ces signaux dans des systèmes basés sur les lasers à blocage de modes. Une technique originale a été mise en place afin de réduire la sensibilité à la dispersion chromatique dans la fibre optique. Une étude de la réduction du bruit de phase des lasers à verrouillage de modes basée sur l’observation de l’effet de la contre réaction et l’injection optique externe a été également présentée. / This thesis focuses on the radio-over-fiber (RoF) communication systems at millimeter frequencies in the frequency range 57-66 GHz and optical generation of a signal at millimeter-wave frequency band. The technique used is based on mode-locked laser diodes. The diodes employed in this work are in quantum dots (or quantum dashes) technology. In this thesis, several studies were conducted: the first relates the ability of integration these types of lasers in the RoF communication systems under direct or external modulation. The second study was devoted to propagation effects. An original technique was implemented to reduce the sensitivity to chromatic dispersion in an optical fiber. A study of the reduction of phase noise mode-locked lasers based on the observation of the reaction effect and against the external optical injection was presented.

Submitted by Lara Oliveira (lara@ufersa.edu.br) on 2017-07-13T22:58:20Z No. of bitstreams: 1 JoãoMC_DISSERT.pdf: 1741418 bytes, checksum: 13c15c64738df641ff1a1cadad54fa09 (MD5) / Approved for entry into archive by Vanessa Christiane (referencia@ufersa.edu.br) on 2017-07-18T15:08:39Z (GMT) No. of bitstreams: 1 JoãoMC_DISSERT.pdf: 1741418 bytes, checksum: 13c15c64738df641ff1a1cadad54fa09 (MD5) / Approved for entry into archive by Vanessa Christiane (referencia@ufersa.edu.br) on 2017-07-18T15:09:03Z (GMT) No. of bitstreams: 1 JoãoMC_DISSERT.pdf: 1741418 bytes, checksum: 13c15c64738df641ff1a1cadad54fa09 (MD5) / Made available in DSpace on 2017-07-18T15:10:18Z (GMT). No. of bitstreams: 1 JoãoMC_DISSERT.pdf: 1741418 bytes, checksum: 13c15c64738df641ff1a1cadad54fa09 (MD5) Previous issue date: 2014-11-07 / In this work, it is analyzed two applications involving optical fiber. In the first application, a new design of an optical fiber coupler composed by two and three cores from a fiber with step index is proposed and analyzed using a vector formulation based on finite element applied in conjunction with genetic algorithm (GA). The fiber is made with pure silica and silica doped with germanium and it is composed by two and three identical cores separated by distance d. The proposed structure has a very simple geometry, and each fiber that composed the coupler is obtained by inclusion of a very small air hole at the core of each conventional step index fibers. Next, optical fiber composed by photonic quasi-crystals, through a quasi-periodic and symmetric matrix, is analyzed using the finite element method, applied in conjunction with perfectly matched layers of type cylindrical. The structure is composed of germanium-doped silica and it is originates from twelve distributions of air holes arranged symmetrically with a defect caused by the absence of central air hole / Neste trabalho, serão analizadas duas aplicações envolvendo fibra óptica. Na primeira aplicação um novo projeto de um acoplador de fibra óptica constituída por dois e três núcleos a partir de uma fibra com índice degrau é proposta e analisada através de uma formulação vetorial baseada em elementos finitos aplicada em conjunto com o Algoritmo Genético (GA).A fibra é feita desílica pura e sílica dopada com germânio e contém dois e três núcleos idênticosseparados por umadistância d. A estrutura proposta apresenta uma geometria bastante simples, ecada fibra que compõe o acoplador é obtida através da inclusão de um buraco de ar muito pequeno no núcleo de cada uma das fibras de índice degrau convencional. Na segunda aplicação, fibras ópticas constituídas por quase cristais fotônicos, através de uma matriz quase periódica e simétrica é analisada através do método dos elementos finitos, aplicado em conjunto com camadas perfeitamente casadas do tipo cilíndricas. A estrutura é composta por sílica dopada com germânio e é originada a partir de doze distribuições de buracos de ar organizados simetricamente com um defeito provocado pela ausência do buraco de ar central / 2017-07-13

Made available in DSpace on 2016-03-15T19:38:07Z (GMT). No. of bitstreams: 1 Alfredo Almeida Araujo.pdf: 1307305 bytes, checksum: fd5b49227c52b28ef3a5392983927234 (MD5) Previous issue date: 2008-02-13 / This dissertation aims to describe the basic characteristics of microstructured fibers, their concept and performance, and to investigate the application of a low loss microstructured fiber to the development of Raman amplifiers. An analysis of the use of these amplifiers in Telecommunication applications is described. To this end, simulations were carried out with these waveguides with the data of a real fiber described in the literature. Simulations were also carried out to determine the amplifier s net gain and noise figure and to establish the advantages of its use in a complete optical fiber span, including the compensation dispersion in the O band (1260-1360 nm). As a result, it was demonstrated that the microstructured fiber presents, in some aspects, a performance that is higher than that of conventional Raman amplifiers, and complementary to that of a commercial amplifiers, such as those based on Erbium doped fiber. / Esta dissertação tem como objetivo descrever as características básicas das fibras microestruturadas, seu conceito e desempenho, e investigar a aplicação de uma fibra microestruturada de baixa perda para o desenvolvimento de amplificadores Raman. Uma análise do uso destes em aplicações de Telecomunicações é descrita. Para isso, foram realizadas simulações destes guias de onda com dados de uma fibra real descrita na literatura. Também foram realizadas simulações para verificação do ganho líquido e figura de ruído de um amplificador baseado nesta fibra e das vantagens de seu uso em um enlace óptico completo, incluindo compensação de dispersão para sinais da banda O (1260-1360 nm). Como resultado, demonstrou-se um desempenho superior em alguns aspectos aos amplificadores Raman convencionais, e complementar aos amplificadores disponíveis atualmente no mercado, como os baseados em fibra dopada com Érbio.

The work deals with dispersive effects of single mode fibers. We learn about the chromatic dispersion, the main attention is paid to the Polarization Mode Dispersion. We clarify the root cause origin of the Polarization Mode Dispersion describing parameters and its effect on transmitted data. Further on, the works dedicates to measure methods of the Polarization Mode Dispersion which is the interferometric method or the POTDR method. We explain the ways of the PMD removal at contemporary optic routes and options of PMD compensation by using compensators of various types. There is also mentioned the possibility of profiting from the soliton transmission. The last chapter deals with measuring of a real optic route. It includes measured data and its evaluation due to the ITU-T demands.

My graduation thesis is concerned with the effect of polarization mode dispersion on transmitted signal by optical line. It describes external and internal causes of origination of polarization mode dispersion. On the basis of these effects there is a differential group delay (DGD). It is the time delay in meantime within individual modes. DGD results in a time extension of impulsion and limitation of maximum bit rate. This thesis contains localization methods of part of gossamer filament with increased value of PMD by POTDR method. This method is based on the principium of back dispersion and its modifications SOP a DOP. Very important chapter of this thesis is the measurement of the polarization mode dispersion. There are described methods of PMD measurement. It is the interferometric and polarimetric method and the method of state of polarization. The major part of this thesis is about the reduction of polarization mode dispersion effect. This part is divided into two parts. First part is about the methods of PMD effect reduction and the second one is about the PMD compensation. The discrepancy between these two parts is the reduction way of PMD effect on transmitted channel. The compensation use the compensation components inserted into the transmission path. By PMD reduction methods we can solve the problems from the view of changing of fibre or all cable. For better understanding of polarization mode dispersion effect there are simulated 4 optical lanes of various parameters. The simulation output is the eye diagram which provides the view at results of transmission lane. In the final part there is the evaluation of measured parameters of optical lanes simulated in a laboratory.

This diploma thesis deals with analysis of current diagnostic methods of optical networks, and it is focused on optical fiber dispersion in singlemode fibers. The work starts with a describtion chromatic dispersion and polarization mode dispersion, causes of and thein influence on the transmitted signal at the beginning. There are set out principles and their appropriate use in the list of measuring methods. Furthermore, the work are given the current possibilities for compensation above dispersions. The sixth chapter deals with the measurements and simulations of real routes in the OptiSystem. There are given appropriate compensation methods for the selected route speeds in the last chapter. The simulation is performed for the bit rate 2.5 Gbit / s, 10 Gbit / s and 40 Gbit / s.

Polarization mode dispersion, PMD influence of fibres. Next includes optic dispersion measurement and compensation of optics dispersion follows. In the end thesis analyze measure of existing fibres, simulating and suggest optimal solutions.

Les réseaux optiques à très haut-débit sont à la base des technologies de l’information d’aujourd’hui et le sujet d’intenses recherches. Alors que l’innovation permet de rendre les transpondeurs flexibles et versatiles, les réseaux de transmission par fibres optiques sont encore configurés manuellement et surtout rarement modifiés au cours de la vie du réseau. Un des points bloquants pour aller vers la reconfiguration et l’automatisation des réseaux optiques est le besoin de prédiction de la performance de tous les liens du réseau de façon précise et rapide. Cependant, la prédiction est rendue plus complexe par la diversité du type de fibres optiques déployées et les régimes de propagation utilisés.Au cours de mes travaux, j’ai étudié expérimentalement les distorsions du signal provenant des effets non-linéaires de type Kerr, accumulées sur des centaines de kilomètres de fibres optiques. Au travers d’expériences spécifiques et contrôlées, j’ai mesuré et mis en évidence les propriétés fondamentales des distorsions non-linéaires. Ces analyses m’ont permis de concevoir l’estimateur d’un modèle de performance destiné à des liens optiques hétérogènes, qui s’applique pour différents types de fibre et différents régimes de propagation.La flexibilité des transpondeurs associés à un estimateur de performance permettront de concevoir, d’optimiser et d’adapter de façon dynamique les canaux en fonction de la demande et de la topologie du réseau, ainsi que de calculer la protection et la restauration des chemins. / Nowadays, high-speed fiber-optic communication networks are the basis of information technology and the subject of intense research. Innovation enables transponders to be flexible and versatile, but fiber optical networks are still configured manually and especially almost never tuned during the life of the network. One of the blocking points toward reconfigurable and automated optical networks is the need of performance prediction for any link of the network in an accurate and fast way. However, the prediction is made even more complex by the diversity of deployed optical fiber types and propagation regimes.During my work, I addressed experimentally the signal distortions coming from nonlinear Kerr effects accumulated on hundreds of kilometers of optical fibers. Based on specific and controlled experiments, I have measured and highlighted the properties of the nonlinear distortions. These analyses allowed me to design a performance model estimator that can be applied to heterogeneous optical links with various optical fiber types and propagation regimes.The flexibility of transponders associated with a performance estimator will optimize and tune the channels dynamically depending on the load and the topology of the network, as well as compute the protection and restoration links.

Esta dissertação de mestrado investiga os formatos de modulação óptica alternativos ao tradicional formato binário de intensidade (NRZ - Non-return-to-zero), ditos avançados, como tecnologia chave para atender às exigências do mercado atual de telecomunicações por transporte de grande volume de dados e alta largura de banda, associados com a redução do custo da informação transmitida por bit. Os formatos avançados de modulação óptica fazem parte das tecnologias que estão sendo investigadas intensamente com o objetivo de superar os desafios impostos pela nova geração de sistemas ópticos com taxas a partir de 40 Gb/s. Este trabalho focaliza o estudo dessa tecnologia, apresentando uma visão geral dos formatos mais discutidos atualmente, suas características e tecnologias de implementação. Foram realizadas simulações utilizando o software comercial Optisystem versão 7.0 da empresa canadense Optiwave Systems Inc., para analisar o desempenho de alguns formatos de modulação de intensidade e de fase com respeito à sensibilidade do receptor, resistência ao cascateamento de filtragem óptica e a efeitos dispersivos e não-lineares. Procurou-se avaliar os formatos em enlaces reais, com características necessárias à sua possível utilização. Também é feita uma breve consideração dos custos associados aos formatos de modulação analisados neste trabalho. Dentre os formatos analisados, os RZ (Return-to zero) apresentaram maior sensibilidade do receptor e melhor tolerância aos efeitos não-lineares que os seus equivalentes NRZ, porém baixa tolerância aos efeitos dispersivos e ao cascateamento de filtragem óptica. O formato duobinário mostrou fraco desempenho de sensibilidade, mas provou ser o mais tolerante à dispersão cromática e à concatenação de filtragem óptica. Os formatos de modulação de fase mostraram ser bem resistentes aos efeitos não-lineares e aos efeitos dispersivos. / This MSc thesis investigates optical modulation formats as an alternative to the use of the traditional intensity binary format NRZ (Non-return-to-zero). Those formats, classified as advanced, represent one of the key technologies aimed to enable the high data volume and broadband, demanded by the present telecommunication market, with cost reduction of transmitted information per bit. Those technologies have been intensevely studied with purpose of overcoming the challenges imposed by the new generation of optical systems, with bit rates from 40 Gb/s. This work focuses on the study of modulation formats most discussed currently, presenting an overview of their main characteristics and implementation techniques. The performance of some intensity and phase formats, in terms of receiver sensitivity, optical filtering cascading, dispersion and nonlinear effects robustness, have been theoretically analyzed from simulations carried out with the commercial software Optisystem v. 7.0, of the Canadian company Optiwave Systems Inc. The analysis has been applied to real optical links, with characteristics that, potentially, demand their use. A cost analysis, based on estimated values associated to devices required for implementing the formats investigated in this work, is also presented. Among the formats studied, those based on RZ (Return-to zero) presented the highest receiver sensitivity and best tolerance to nonlinear effects, in comparison to their equivalent formats, based on NRZ. However, they are less tolerant to dispersive effects and optical filtering cascading. The duobinary format (DB) has shown a weak performance in terms of sensitivity, though has been proved to be the most tolerant to chromatic dispersion and filtering cascading effects. Among all formats, the phase modulation ones presented the highest resistance against nonlinear and dispersive effects.

Esta dissertação de mestrado investiga os formatos de modulação óptica alternativos ao tradicional formato binário de intensidade (NRZ - Non-return-to-zero), ditos avançados, como tecnologia chave para atender às exigências do mercado atual de telecomunicações por transporte de grande volume de dados e alta largura de banda, associados com a redução do custo da informação transmitida por bit. Os formatos avançados de modulação óptica fazem parte das tecnologias que estão sendo investigadas intensamente com o objetivo de superar os desafios impostos pela nova geração de sistemas ópticos com taxas a partir de 40 Gb/s. Este trabalho focaliza o estudo dessa tecnologia, apresentando uma visão geral dos formatos mais discutidos atualmente, suas características e tecnologias de implementação. Foram realizadas simulações utilizando o software comercial Optisystem versão 7.0 da empresa canadense Optiwave Systems Inc., para analisar o desempenho de alguns formatos de modulação de intensidade e de fase com respeito à sensibilidade do receptor, resistência ao cascateamento de filtragem óptica e a efeitos dispersivos e não-lineares. Procurou-se avaliar os formatos em enlaces reais, com características necessárias à sua possível utilização. Também é feita uma breve consideração dos custos associados aos formatos de modulação analisados neste trabalho. Dentre os formatos analisados, os RZ (Return-to zero) apresentaram maior sensibilidade do receptor e melhor tolerância aos efeitos não-lineares que os seus equivalentes NRZ, porém baixa tolerância aos efeitos dispersivos e ao cascateamento de filtragem óptica. O formato duobinário mostrou fraco desempenho de sensibilidade, mas provou ser o mais tolerante à dispersão cromática e à concatenação de filtragem óptica. Os formatos de modulação de fase mostraram ser bem resistentes aos efeitos não-lineares e aos efeitos dispersivos. / This MSc thesis investigates optical modulation formats as an alternative to the use of the traditional intensity binary format NRZ (Non-return-to-zero). Those formats, classified as advanced, represent one of the key technologies aimed to enable the high data volume and broadband, demanded by the present telecommunication market, with cost reduction of transmitted information per bit. Those technologies have been intensevely studied with purpose of overcoming the challenges imposed by the new generation of optical systems, with bit rates from 40 Gb/s. This work focuses on the study of modulation formats most discussed currently, presenting an overview of their main characteristics and implementation techniques. The performance of some intensity and phase formats, in terms of receiver sensitivity, optical filtering cascading, dispersion and nonlinear effects robustness, have been theoretically analyzed from simulations carried out with the commercial software Optisystem v. 7.0, of the Canadian company Optiwave Systems Inc. The analysis has been applied to real optical links, with characteristics that, potentially, demand their use. A cost analysis, based on estimated values associated to devices required for implementing the formats investigated in this work, is also presented. Among the formats studied, those based on RZ (Return-to zero) presented the highest receiver sensitivity and best tolerance to nonlinear effects, in comparison to their equivalent formats, based on NRZ. However, they are less tolerant to dispersive effects and optical filtering cascading. The duobinary format (DB) has shown a weak performance in terms of sensitivity, though has been proved to be the most tolerant to chromatic dispersion and filtering cascading effects. Among all formats, the phase modulation ones presented the highest resistance against nonlinear and dispersive effects.