The subject of the master's thesis is elaborate a project documentation to obtain a building permit for the multifunctional house. The proposed building is located in Štúrovo in the urban part of the polyfunctional area with predominant housing. The plot is slightly sloped. The building in question consists of five above-ground floors. The building is divided into a commercial zone, an administrative zone and a living area. The structural system of the building is cast-in-place reinforced concrete frame. The building is roofed with single-shell flat roof. In the preparation of the project documentation was used valid legislation, laws and technical norms. Drawings are made in program Nemetschek Allplan 2013, visualisation is SketchUp program.

The diploma thesis deals with preparation, organization and construction technology of an administrative building in Karviná. It is about new building with four above ground floor. From a design point of view, the structure is designed as a precast concrete frame. The diploma thesis contains technical report, coordinating situation with design of transport ways, time financial plan, study of the implementation of the main technological phases, concept of construction site equipment, design of machinery set, time plan with worker bilancion, material delivery plan for rough building, technical report for masonry work, inspection and test plan for masonry work, item budget with the statement of measurements and noice study for earthworks.

The diploma thesis deals with construction technological project of Central zone technology park in Brno. The thesis involves engineering report, coordinate situation, time and financial plan, study of the main technological stages, project of site equipment, design of machine formativ, time schedule, itemized budget with bill of quantities, technological prescription of monolithic reinforced concrete frame, kontrol and test plan, sefety and health care policy and structural details.

The theme of diploma thesis is design of convention center situated in area of BVV Trade Fairs Brno. The location of designed buildings is reacting on surrounding buildings and important compositional axes.The convention center is crossing axis leading from historical entrance and its front glass facades open the view for dominant feature of hotel zone in south part of area.The convention center is designed as two three-storey buildings connected by bridge with sightseeing terrace and main entrance underneath. The bigger building contains main convention hall with a maximal capacity of 2300 people, two halls with a capacity of 500 and 600 people and other conference and meeting rooms with various capacity. The other building contains plenary hall with a capacity of 1100 in circular seating arrangement. The buildings are connecting to pavillions C and B, which provide spaces for opening and exhibiton parts of cenvention events. Designed convention center provides spaces for big diversity of conventional events thanks to its capacities and location.

The diploma thesis deals with the structural assessment of the existing reinforced concrete frame structure of the production building. The structure under consideration is carried out as a reinforced concrete monolithic frame structure with a discrepancy of 6,15 x 6,15 m (axis). The object has a rectangular plan of 13 x 9 fields. The total dimension is 56 x 81m and is divided into three dilation units on all floors by two inserted 3,65 m wide fields. The building has three above-ground floors and one underground floor. The construction height of the basement is 3,675 m, above ground level 4,0 m. On the west side of the building (axis A) are three reinforced concrete elevator shafts with a dimension of approximately 4,5 x 3,8 m. The envelope and inner partitions are made of bricks full of burned. The work shall include a static assessment of the status quo, a determination of the load capacity and a proposal for appropriate adjustments to ensure static reliability.

The subject of my diploma thesis is preparation of realization of Active center. Diploma thesis includes technological regulation for concrete constructions and the roof, project of machine set, the inspecting and testing plans, plan of BOZP, the budget and the time table of main construction object. I alson did the project of the building site facilities and drawings needed.

The subject of this diploma thesis is construction-technological preparation of a residential building in Julianov. It includes a technical report on building structures, a construction technology study, a technological prescription, a control and test plan, a site equipment design, a design of a machine set, an item budget, a timetable, and a design for the implementation of paved areas.

The subject of this diploma thesis is the elaboration of the revitalization of a multifunctional building in Uherský Brod. The assignment was the elaboration of the project documentation for the issue of the building permit. This building has four floors and one basement. The supporting system of the building is reinforced concrete frame with brickwork. Ceiling structures are from reinforced concrete primary and secondary beams with slabs. Roofs of the building are designed as pitched roof, warm flat roof and double–skinned roof.

The subject of this thesis is the architectural study of revitalization of a city block and its spatial structure. Selected part of city was solved already in previous project that preceded own thesis. Merger proposal will allow a larger number of different functions within the complex, which will ensure the residents to various forms of housing, services and employment and leisure activities. The studied area is located in the city of Brno-Veveří. Plan shape of the object based on the area in which the three parties connected to the access road. Mass and spatial design respects the surrounding buildings and uses the sidewalks along the whole of the area. The matrix of the object is divided by two axes passing through the object into three blocks linked by a courtyard. This creates a square with a water surface with the possibility of recreation and sitting under the trees. The shape of these three blocks is further formed in several height terraced layers. Do terraces are placed in the atrium and individual residential and office units have large windows and balcony available. This solution brings natural light into the interior while allowing illumination of the courtyard and surrounding objects within the chosen area. This spatial structure is horizontally divided by function. There are proposed underground public garage, arcade with shops, services, administration and housing. The exterior of the building is designed by combining brick facades and white plaster, which works like optically lighter impression of the building.

The aim of the final thesis is to design and structural design report of selected elements of prefabricated storage hall. Processing of foundation drawing, element composition and for each designed element formwork drawing and reinforcement. It is a single-storey hall, where the main structural system consists of a transversal frame columns and prestressed girder. In this final thesis I designed and structural assessed prestressed girder, reinforced concrete purlin, roof bracing, column, grade beam and foundation pad. The calculation software Scia Engineer is used to calculate the effects of internal forces. The results are compared using a simplified method. The design and structural assessment are made according to valide standards. The designed construction complies with the limit state of ultimate and serviceability.