The subject of this diploma thesis is the desing and development of project documentation for the construction of a new building of the multifunctional house Rozkošská. Object will be located in the city of Hlavlíčkův Brod in part Rozkoš. The new biulding will be divided in to commercial space in ground floor, office space in second floor and residental area in third floor. It is three-storey multifuncional house with a warm flat roof with a typical sequence of layers based on foundation pads. The structural system is desinged reinforced concrete frame. The diploma thesis is processed with the valid standards, laws and decreens of the Czech Republic in the current version.

The Master’s thesis is about processing design documentation for a new bulding of firehouse type P4. Location of the bulding is chosen so the firehouse is near the industrial precinct , further to be near to the planned highway connection and city bypass so they don’t have to pass in the event of an alarm through the city. The firehouse is design as partly two-storey and partly single-storey building. On the first floor is on the north storage part with technical utility rooms. In the middle is garage for fire trucks, and on the south side of the station is hygienic and wet areas, gym and meeting room for emergency staff. On the second floor are rooms for firefighters and offices for officers. Construction system of the building is precast concrete frame with longitudinal construction system. Building envelope is due to the local architecture designed as infill wall with contact thermal insulation systém ETICS. Warm flat roof are green. In the station are placed eight firetrucks (3x CAS, DA, TZA, RZA, AŽ, NA) and 17 fireman in the one shift in three teams.

Master´s thesis premises designed Health centre Sadová on the level of documentary for execution of works. The building has thirteen medical equipment with facilities, pharmacy, health food store, optics and refreshment. The building is simply-shaped, with four above-ground floors and basement. The structural systém is cast-in-place concrete frame. The infill wall in basement is walled with permanent formwork blocks and the ground floors are walled with clay blocks. Floor structures are cast-in-place reinforced concrete. Roof structure is designed like flat roof. The building has thermal insulation and cladding with fibre cement board.

The master´s thesis - City Library Ivančice - is drafted as a building documentation under relevant laws and standarts. The project processes documentation of a new house of publick building. It is designed as a reinforced concrete frame with, filled with brickwork and contact insulation. The building contains basement and three aerial floors. The roof is designed as single layer flat roof.

The masters thesis dealt with reconstruction of the complex military garages built in the mid 20th century. The site is located in Brno, close to Peace Square, Lerchova 915/62, Brno-Stránice, 602 00 Brno. Area of land area is 5,384.25 square meters. Reconstruction involves two detached single-storey buildings, the street Lerchova object and the object at the Valley Street. The goal is the maximum possible use of existing quality substructure, which is a combination of internal reinforced concrete frame and brick outer shell. The work is divided into a comprehensive layout of both buildings and detailed sub-project for the construction project on a subject at street Lerchova. Reconstruction of the resolves completely change the layout and especially the concept of architectural design. In terms of architecture, wider relations into account the existing development, which tries to resemble the representation. The building is at street Lerchova basement one floor, built up area is 620.5 square meters. Reconstruction of superstructure solves one floor, making new pitched roof and building a walkway that allows connection between the two objects. Revitalization is due on the requirements of the public and addresses the widespread use of indoor and outdoor spaces as much as possible. It is particularly emphasized promote leisure activities not only public, but especially young people and support for education, mental and physical, education and counseling. We can not forget easily to most complex space by persons with limited mobility.

Diploma thesis "Residential building" is handleded in the form project documentation. It is a five-story building, the basement. The building is divided into two sections. The supporting structure of the building is monolithic frame with masonry infill. The building is located in a slightly sloping terrain. The entire building is covered by a flat roof. Individual residential units are located in the second, third, fourth and fifth floors. On the first floor there are two multiple garages, storage rooms, utility room and entrance tickets. Parts thesis are specialist in TZB and concrete structures.

The purpose of the diploma thesis is to design a multi-functional bulding, which fill an empty space on the corner of two streets near the historical city centre of Čáslav. This building has mainly a residential function. Basement will be used for parking and as a place for technical room. Commercial use is forseen for the first floor. Other floors will be set by 18 flats. The main goal is to solve a disposition for given purpose, to choose a right type of structure and work up chosen part of project documentation for building permission. Blueprints will be made in a proper CAD program.

The apartment building is located in Brno, Vojtova street. It´s a building with four overground floors and one underground floor, which is mainly used as collective garage. As a structural system is used reinforced concrete skeleton. The building has a single-layer flat roof.

The theme of my dissertation is creation of technical dokumentacion for the Apartment Building with Commercial premises. The building is three storey. In the 1st floor is located a shop and garage, in the 2nd floor and 3rd floor apartments. The building is designed as a monolithic concrete frame contruction with flat roof. Peripheral walls are sandwich ones made from ceramics masonry and contacts thermal insulation systém.

The project contains structural design of new multifunctional building in Brno. The building has five floors and a basement. In the first and second floor are designed stores and cafe. There are apartments in third to fifth floors. The basement serves as the technical background and storage space for users apartments. The structural system consists of reinforced concrete frame complete with walls of ceramic blocks. The roof is flat with a vegetative layer, and access for users apartmens.