Diploma thesis deals with creating the concept of container based modular building. The process of building is made by connecting module. Three block modules were designed. They could be created up to nine combinations (Up to nine combination might be created up by these). The modules are designed as a diffuse open wooden building with a warm flat roof. Family house is one of the possible combinations. Construction of building consists of two connected modules that are made like single-storey. Founded on earth screws. Under the construction is ventilated space. The building is situated on flat land (parcel) in Velké Němčice. The advantages of modular container buildings are good thermal properties, short time of construction and the possibility of connecting or disconnecting the modules.

Diploma thesis solves newly built pension in the village Jestřabí v Krkonoších - Křížlice. The pension is separately standing in a sloping terrain. It has a cuboid shape with gable roof, three aboveground floors and an underground floor with partial basement. The house is designed for accomodation of persons including families with children in the summer and winter season, with possibility of conferences and corporate training courses in off-season. As a part of pension there is a flat for its owner. Structural system is transversal, wall, technology of masonry. Horizontal load-bearing structures are combined. Gable roof is made by timber truss girders with metal roofing. Staircase is straight, two-arm with landing, monolithic. Foundation structures are shallow, foundation strips are monolithic, rectangular shaped, made from plain concrete.

The theme of this thesis is the design and assessment of the supporting structure of a footbridge over the river Svratka in Brno. Span bridge is 40 meters and width of 4.2 meters. The bridge is located in the administrative area Brno - Bystrc.

This thesis deals with massive wooden buildings especially with regard to the current approach to their design, assessment and approval. In this thesis are shown future possibilities of development of traditional wooden buildings with regard to current thermal technical requirements. Theoretical considerations are then compared with measurements which were performed on massive wooden wall samples.

There is ussualy used the Masopust's method to assessment the piles in Czech Republic. This method is based on statistical processing of large data set of load piles tests. Due to the using of regression coefficients this method is relatively complicated and not very transparent. Instead, foreign standards ussualy use direct the values of limit stress on the base of piles and unit friction capacity. Procedure for determining the bearing capacity of the piles is thus considerably simplified. In this thesis the Masopust's method is compared with the methods used in Germany and Austria. This comparison provides insight to the safety level that include various approaches.

The teoretical part of the thesis provides a discussion on the creative work with wood and focuses on wood as a traditional material, which plays a fundamental role not only in the lives of humans, but also in the visual arts culture. This part further discusses the application of this topic in the art and design education with special reference to the relevant educational curricular documentation, methodology of art education through projects and the cross-curriculum relation with eviromental education. The practical part of the thesis was realised in the 2nd class of the Komensky primary school in the town Dačice, the Czech Republic. This part introduces a creative project centred on the topic of wood while discussing its applicability for the art and design education at the lower primary schools. The project consists of the seven creative lessons as a part of the regular art education, which are duly elaborated upon in the practical part.

This thesis describes design gallery of aviation technology and traditions at the airport in Brno Part of my thesis is focused on urban solution of area layout its interconnections with near districts “Komín“ and “Medlánky“. There is new pedestrian, cycling paths, operational and logistic roads inside the complex layout. This design supposed to keep the two existing historic hangars and demolishing remaining buildings with subsequent completion of necessary objects. Priority and the main idea is to keep compositional and visual axis to ensure visual contact with all airport operational parts to ease of orientation. According to this principle is mass and platform solved with object “gallery”. This object in addition to the exhibition space is also used for administration and operation department of the gallery. In separate part there is ensured catering in form of restaurant with associated technical, operational and sanitary facilities. The gallery is designed to visually and physically separate section used by pilots and airport vehicles from visitors to avoid dangerous situation. Other buildings I have designed in my project are “the clubhouse”, airport administration, emergency accommodation, social activity space mainly designed for aircraft-model pilots and the air traffic control tower. These objects creates border between premises restricted for aero club and visitors.

A specialized project of „Sports center behind Lužánky Brno“ preceded the diploma thesis. The aim of the project was to develop a comprehensive urban architectural plan with an emphasis on the urban context, transport services, functionality, etc. The diploma thesis develops a previous project and elaborates the compound of the sport center in a form of a study. As a result, there is a building that combines a recreational and social function due to sports halls, restaurants, clubs and residential atrium. The object is divided in three parts, the middle one is used for a main communicative area that connects the other parts of the building.

The aim of my diploma thesis is to elaborate project documentation for the execution of a new building of kindergarten. The intention is to construct a new kindergarten which access preschool-age children has visual contact with nature and space of outside. This is purpose why all main windows face south. In the second floor is situated schoolroom for minor activity. The building is designed as brick, using clay blocks which are put on concrete foundation strips. Basement walls are from formwork brick fill concrete and steel armature. Thermal insulation is from contact thermal insulation system and ventilated facade with wood clapboard from pine (Thermowood). The roofing is designed partly as single-shell vegetative (extensive) roof and partly as a float double-shell roof with timber truss girder. Ceiling construction in the basement and the first floor is from concrete load-bearing structure.

My thesis deals with a project documentation processing of a new building “ Low Floor Apartment Complex – Horoměřice”. All requirements strictly follow effective legal regulations. The complex is comprised of three objects arranged as the U-shape. The two-floor object A is a combination of masonry from reinforced concrete and a wooden structure. The object B is a single-storey wooden structure and the object C is a two-floor wooden structure. All these objects are covered by a two-coating counter roof. My thesis is a construction technical arrangement, which contains a fire safety report, a heat treatment, a layout plan, a proposal and a calculation of a strip foundation as well.