31 |
Automated collection of vehicular delay data at intersectionsLegere, Jay Francis January 1983 (has links)
Most current methods used for the estimation of vehicular delay at intersections involve some form of manual data collection. These methods rely on statistical correlation to improve the accuracy of the delay estimates. In addition, most require significant data collection and reduction efforts.
This work presents the theory, design, and operation of a microprocessor-based system for the collection of vehicular delay data at intersections. The hardware design is described in detail including schematic diagrams of the microprocessor system and the associated interface circuitry. Documented software listings and flowcharts are provided as well as a description of the data collection and reduction processes.
A benefit/cost analysis was made based on the construction and operation of a prototype system. The system performance was evaluated both in the lab and through analysis of data collected in the field. Recommendations for further development of the device are presented as well as applications of the microprocessor to other forms of transportation and traffic engineering data. / M.S.
|
32 |
A data acquisition system with switched capacitor sample-and-holdHarbour, Kenton Dean January 2011 (has links)
Typescript (photocopy). / Digitized by Kansas State University Libraries / Department: Electrical Engineering.
|
33 |
Instrumentation of a Savonius wind turbineBabb, Samuel Martin. January 1979 (has links)
Call number: LD2668 .T4 1979 B32 / Master of Science
|
34 |
An architectural framework for describing Supervisory Control and Data Acquisition (SCADA) systemsWard, Michael P. 09 1900 (has links)
Approved for public release; distribution is unlimited / Two recent trends have raised concerns about the security and stability of Supervisory Control and Data Acquisition (SCADA) systems. The first is a move to define standard interfaces and communications protocols in support of cross-vendor compatibility and modularity. The second is a move to connect nodes in a SCADA system to open networks such as the Internet. Recent failures of critical infrastructure SCADA systems highlight these concerns. To ensure continued operations in times of crisis, SCADA systems, particularly those operating in our critical infrastructure, must be secured. Developing an abstract generic framework for defining and understanding SCADA systems is a necessary first step. A framework can provide the tools to understand the system's functions and capabilities, and how components in the system relate and interface with each other. This thesis examines and describes SCADA systems, their components, and commonly used communications protocols. It presents a matrix approach to describing and defining the features, functions and capabilities of a SCADA system. Two small SCADA systems, using industry standard components and simulating real world applications, were designed and constructed for this thesis to provide context for applying the matrix approach. / Captain, United States Marine Corps
|
35 |
Development of data acquisition and control facilities for the optimization of drive line efficiencyFunk, Kent Douglas. January 1986 (has links)
Call number: LD2668 .T4 1986 F86 / Master of Science / Mechanical and Nuclear Engineering
|
36 |
The Effect of Knee Pads on Gait and ComfortCastagno, Thomas A 26 April 2004 (has links)
The goals of this thesis were: (1) to develop a data acquisition system for measuring gait parameters and (2) to determine the effect of knee pads on gait and comfort. The data acquisition system consisted of a data acquisition card that was inserted in the PC card (PCMCIA) slot of a laptop computer, a knee goniometer, foot switches, and pressure sensors. Various drive circuits were designed to connect the different sensors to the data acquisition card. The gait analysis results showed that the knee pads do not have a significant effect on long range gait correlations calculated from the stride interval. Pressure measurements between the knee pads and the knee showed that a pressure in the range of 0 to 8.31 psi occurred when kneeling. The maximum pressure for the sensor located under the top strap of the knee pad occurred when getting into and out of the kneeling stance. The data acquisition system successfully met the design objectives. The stride interval was recorded and analyzed, and pressures were successfully measured and analyzed.
|
37 |
A data acquisition, processing, and display system for experimental work in veterinary medicineGallagher, Donald Dean January 2011 (has links)
Photocopy of typescript. / Digitized by Kansas Correctional Industries
|
38 |
Optimal integrated multi-sensor system for full-scale structural monitoring based on advanced signal processingLi, Xiaojing, School of Electrical Engineering & Telecommunications & School of Surveying & Spatial Information Systems, UNSW January 2006 (has links)
Modern civil structures as well as loads on them are still too complex to be accurately modeled or simulated. Therefore, structural failures and structural defects are NOT uncommon! More and more full-scale structural monitoring systems have been deployed in order to monitor how structures behave under various loading conditions. This research focuses on how to maximise benefits from such full-scale measurements by employing advanced digital signal processing techniques. This study is based on accelerometer and GPS data collected on three very different structures, namely, the steel tower in Tokyo, the long and slender suspension bridge in Hong Kong, and the tall office tower in Sydney, under a range of loading conditions, i.e., typhoon, earthquake, heavy traffic, and small scale wind. Systematic analysis of accelerometer and GPS data has demonstrated that the two sensors complement each other in monitoring the static, quasi-static and dynamic movements of the structures. It has also been confirmed that the Finite Element Model could under-estimate the natural frequencies of structures by more than 40% in some case. The effectiveness of using wavelet to de-noise GPS measurement has been demonstrated. The weakness and strengths of accelerometer and GPS have been identified and framework has been developed on how to integrate the two as well as how to optimize the integration. The three-dimensional spectral analysis framework has been developed which can track the temporal evolution of all the frequency components and effectively represents the result in the 3D spectrogram of frequency, time and magnitude. The dominant frequency can also be tracked on the 3D mesh to vividly illustrate the damping signature of the structure. The frequency domain coherent analysis based on this 3D analysis framework can further enhance the detection of common signals between sensors. The developed framework can significantly improve the visualized performance of the integrated system without increasing hardware costs. Indoor experiments have shown the excellent characteristics of the optical fibre Bragg gratings (FBGs) for deformation monitoring. Innovative and low-cost approach has been developed to measure the shift of FBG???s central wavelength. Furthermore, a schematic design has been completed to multiplex FBGs in order to enable distributed monitoring. In collaboration with the University of Sydney, the first Australian full-scale structural monitoring system of GPS and accelerometer has been deployed on the Latitude Tower in Sydney to support current and future research.
|
39 |
Semi-automated characterization of thin-section petrographic images /Mouland, Darrell, January 2005 (has links)
Thesis (M.Eng.)--Memorial University of Newfoundland, 2005. / Bibliography: leaves 110-113.
|
40 |
An iterative representer-based scheme for data inversion in reservoir modelingIglesias-Hernandez, Marco Antonio, 1979- 25 September 2012 (has links)
With the recent development of smart-well technology, the reservoir community now faces the challenge of developing robust and efficient techniques for reservoir characterization by means of data inversion. Unfortunately, classical history-matching methodologies do not possess computational efficiency and robustness needed to assimilate data measured almost in real time. Therefore, the reservoir community has started to explore techniques previously applied in other disciplines. Such is the case of the representer method, a variational data assimilation technique that was first applied in physical oceanography. The representer method is an efficient technique for solving linear inverse problems when a finite number of measurements are available. To the best of our knowledge, a general representer-based methodology for nonlinear inverse problems has not been fully developed. We fill this gap by presenting a novel implementation of the representer method applied to the nonlinear inverse problem of identifying petrophysical properties in reservoir models. Given production data from wells and prior knowledge of the petrophysical properties, the goal of our formulation is to find improved parameters so that the reservoir model prediction fits the data within some error given a priori. We first define an abstract framework for parameter identification in nonlinear reservoir models. Then, we propose an iterative representer-based scheme (IRBS) to find a solution of the inverse problem. Sufficient conditions for convergence of the proposed algorithm are established. We apply the IRBS to the estimation of absolute permeability in single-phase Darcy flow through porous media. Additionally, we study an extension of the IRBS with Karhunen-Loeve (IRBS-KL) expansions to address the identification of petrophysical properties subject to linear geological constraints. The IRBS-KL approach is compared with a standard variational technique for history matching. Furthermore, we apply the IRBS-KL to the identification of porosity, absolute and relative permeabilities given production data from an oil-water reservoir. The general derivation of the IRBS-KL is provided for a reservoir whose dynamics are modeled by slightly compressible immiscible displacement of two-phase flow through porous media. Finally, we present an ad-hoc sequential implementation of the IRBS-KL and compare its performance with the ensemble Kalman filter. / text
|
Page generated in 0.1341 seconds