Spelling suggestions: "subject:"decoloration"" "subject:"decolourisation""
1 |
Methods for Removing Colour from Polyester and Cotton Blended Textile WasteLöthwall, Adina, Magnusson, Hedvig January 2020 (has links)
The textile industry is developing at a fast pace, and is constantly changing. It is constantly evolving new methods for recycling and further research is important for future needs. The ability to recycle a textile blended material is a step towards a more sustainable industry. There are however different difficulties around the various processes that have to be removed for recycling. The purpose of the study is to find methods for removing dyes from polyester and cotton blended textile waste for recycling. To investigate the subject, a literature study combined with interviews with experts was performed. The results of the study shows that it is possible to remove dye from cotton and polyester individually. To remove dye from cotton chlorine and hydrogen peroxide are used. Another method is to use a reducing agent hydrosulphite and after use together with lye. There are several ways to remove colour from polyester, although it will almost always have a residue of colour left. One can either melt the pigment into the fibre by using heat. Another method is to use chemicals which increase the amorphous areas in the fibres and the colour will be penetrated. Finally, when investigating a method for removing dye from a polyester and cotton textile blend. The study has highlighted the need of developing new methods without destroying the quality of the fibres. By this study it has been concluded removing dye from fibres are difficult but can be achieved with certain chemicals and processes. It is concluded in the study, removing dye from polyester and cotton individually can be succeed. However, removing colour from a blended fabric is rather difficult. The study has focus on discussing the difficulties when decolouring a blended textile.
|
2 |
Removal of Congo red dye from aqueous solution using a clay based nanocompositeRasilingwani, Tshimangadzo Edward 21 September 2018 (has links)
MENVSC / Department of Ecology and Resource Management / In this study, the efficacy of bentonite clay, pre-treated magnesite and their nanocomposite on the removal of Congo red dye from aqueous solution was explored. Batch experimental approach was a technique used to fulfil the goals of this study. A number of operational parameters were optimised, and they include effects of shaking time, adsorbent dosage, initial CR dye concentration, initial solution pH and temperature. Findings of the study revealed that the optimum conditions that are suitable for the removal of CR dye are 20 minutes, 0.5 g of dosage, 120 mg/L, 250 rpm, and pH = 7. This has achieved > 99% removal efficacy of CR dye for the nanocomposite and reduced it to below the South African National Standard (SANS) 241 water quality specifications. Furthermore, kinetic studies revealed that bentonite clay, pre-treated magnesite, and their nanocomposite fitted very well to pseudo-second-order kinetics than pseudo-first-order kinetics. The regression analysis was observed to be 1, 0.9, and 0.9 for bentonite clay, pre-treated magnesite, and their nanocomposite respectively. Adsorption isotherms indicated that CR removal by bentonite clay, pre-treated magnesite, and their nanocomposite fitted well to Langmuir adsorption isotherm than the Freundlich adsorption isotherm hence indicating mono-layer adsorption. Thermodynamic values for CR removal were observed to be: ΔH0 (kJ mol-1) = 43.86, 30.67, and 24.88 for bentonite clay, pre-treated magnesite, and their nanocomposite respectively. This indicates that the reaction is endothermic. The positive ΔS0 (kJ mol-1 K-1) values for bentonite clay and 25 °C for pre-treated magnesite confirms that there is an increase in the degree of randomness at solid/solution interface during the removal of CR ions from aqueous solution. The negative values of ΔG0 (kJ mol-1) for 40 – 70 °C on bentonite and the entire range for the nanocomposite suggest the spontaneity and feasibility of CR adsorption whereas the positive ΔG0 (kJ mol-1) for bentonite clay suggest a non-spontaneous nature of adsorption. As such, pre-treated magnesite/bentonite clay nanocomposite demonstrated superior adsorption capacity in relation to individual materials and other materials reported in literature. / NRF
|
Page generated in 0.0818 seconds