Spelling suggestions: "subject:"defect ground structure""
1 |
Design of Microwave Filter Using Band-Gap StructuresWang, Yu-Tsai 04 August 2004 (has links)
Using compact structure to improve the defect of traditional transmission line filter which size is too big or transmission line is too long. Two special structures are used to implement the filter that is smaller or superior characteristic.
One of the two structures is called DGS that etched defect in the ground plane. The etched lattice shape for the transmission line consists of narrow and wide etched areas in backside metallic ground, which give rise to increasing the effective capacitance and inductance of a transmission line, respectively. Thus, by using this character, the low-pass filters are designed and implemented easily. Another structure is coupled of microstrip square open-loop resonators. First, the coupling coefficients of the three basic coupling structures versus distance between adjacent resonators and different offset is established by means of three-dimensional field analysis methods. Then, the band-pass filter will be implemented by the combination of three basic coupling structures.
Finally, two low-pass filter which have cutoff frequency 5.4GHz¡B2.26GHz and a four-pole band-pass filter are designed and fabricated. All theoretical and experimental performance is presented.
|
2 |
Four-port miniaturized and highly isolated antenna for multiple-input multiple-output communication systemsAyele, Mehari L. 12 1900 (has links)
The objective of this paper is to present an efficient miniaturized antenna design and simulation of a highly isolated multi-port micro-strip antenna for multiple-input multiple-output communication (MIMO) systems. Three geometric configurations were proposed and compared to achieve an isolation of as low as –30 dB without affecting the antenna performance greatly. The antenna was designed to operate at a resonance frequency of 2.45 GHz (fc ). Ferrite material beneath each meander structure was used for miniaturization purposes as well as an FR4 substrate with a compact overall area of .75 lambda0 ×.5 lambda0 for a system board, where lambda0 is the free space wavelength. A ground plane with small etched slits was used for isolation purposes. A maximum gain of 4.6 dBi in the azimuthal plane was achieved. Index Terms: MIMO, meander antenna, four-port antenna, defected ground structure / Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical Engineering and Computer Science
|
3 |
An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD Laio Lucas de Souza Orientador: Prof. Dr. Paulo Henrique da Fonseca Silva JO?O PESSOA 2015Souza, Laio Lucas de January 2015 (has links)
Submitted by Alex Sandro R?go (alex@ifpb.edu.br) on 2016-09-01T13:11:30Z
No. of bitstreams: 1
An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5) / Approved for entry into archive by Alex Sandro R?go (alex@ifpb.edu.br) on 2016-09-01T13:12:05Z (GMT) No. of bitstreams: 1
An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5) / Made available in DSpace on 2016-09-01T13:12:05Z (GMT). No. of bitstreams: 1
An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5)
Previous issue date: 2015 / Esta Disserta??o descreve a aplica??o do m?todo das Diferen?as Finitas no Dom?nio do Tempo (FDTD ? Finite Difference Time Domain) para a an?lise de filtros fabricados em linhas de microfita para a faixa de micro-ondas. O m?todo FDTD 3-D, desenvolvido em linguagem C, implementa condi??es de contorno com o uso da t?cnica PML (Perfect Matched Layer), permitindo a determina??o num?rica dos campos eletromagn?ticos com uma menor interfer?ncia das reflex?es indesej?veis nos limites da malha FDTD.
A fim de comparar os resultados obtidos com o m?todo FDTD, o software comercial Ansoft DesignerTM tamb?m ? usado para simula??o dos filtros abordados. Cinco prot?tipos foram constru?dos e caracterizados experimentalmente com o uso de um analisador de redes vetorial, Agilent N5230A. Estes resultados num?ricos e experimentais s?o usados para a compara??o do m?todo FDTD 3-D desenvolvido.
O m?todo FDTD foi aplicado para an?lise de um filtro passa-baixa em linha de microfita, de filtros DGS (Defected Ground Structure) unit?rios e peri?dicos e de um filtro spur-line. Os resultados de simula??o foram concordantes com os experimentos realizados com um erro m?ximo de 4,8% para os filtros abordados. Atrav?s de varia??es na malha FDTD, uma an?lise de desempenho do m?todo FDTD foi realizada em termos de precis?o e esfor?o computacional.
|
4 |
An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTDLucas de Souza, Laio 25 November 2016 (has links)
Submitted by Alex Sandro R?go (alex@ifpb.edu.br) on 2016-11-25T13:25:10Z
No. of bitstreams: 1
9- Laio Lucas de Souza - An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5) / Approved for entry into archive by Alex Sandro R?go (alex@ifpb.edu.br) on 2016-11-25T13:25:58Z (GMT) No. of bitstreams: 1
9- Laio Lucas de Souza - An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5) / Made available in DSpace on 2016-11-25T13:25:58Z (GMT). No. of bitstreams: 1
9- Laio Lucas de Souza - An?lise e Simula??o de Filtros de Microfita Utilizando o M?todo FDTD.pdf: 3682016 bytes, checksum: e7b92fd51edaba9be1f80daf86f10b4d (MD5)
Previous issue date: 2016-11-25 / Esta Disserta??o descreve a aplica??o do m?todo das Diferen?as Finitas no Dom?nio do Tempo (FDTD ? Finite Difference Time Domain) para a an?lise de filtros fabricados em linhas de microfita para a faixa de micro-ondas. O m?todo FDTD 3-D, desenvolvido em linguagem C, implementa condi??es de contorno com o uso da t?cnica PML (Perfect Matched Layer), permitindo a determina??o num?rica dos campos eletromagn?ticos com uma menor interfer?ncia das reflex?es indesej?veis
nos limites da malha FDTD. A fim de comparar os resultados obtidos com o m?todo FDTD, o software comercial Ansoft DesignerTM tamb?m ? usado para simula??o dos filtros abordados. Cinco prot?tipos foram constru?dos e caracterizados experimentalmente com o uso de um analisador de redes vetorial, Agilent N5230A. Estes resultados num?ricos e experimentais s?o usados para a compara??o do m?todo FDTD 3-D desenvolvido. O m?todo FDTD foi aplicado para an?lise de um filtro passa-baixa em linha de microfita, de filtros DGS (Defected Ground Structure) unit?rios e peri?dicos e de um filtro spur-line. Os resultados de simula??o foram concordantes com os experimentos realizados com um erro m?ximo de 4,8% para os filtros abordados. Atrav?s de varia??es na malha FDTD, uma an?lise de desempenho do m?todo FDTD foi realizada em termos de precis?o e esfor?o computacional.
|
5 |
Planární fraktální filtr na substrátu s porušenou zemí / Planar fractal filter on defected ground substrateKufa, Martin January 2012 (has links)
The diploma thesis is focused on the design of planar filters combining fractal layouts and defected ground substrates. The diploma thesis can be divided into three main parts. First, basic knowledge about fractals is presented (creation of Minkowski Island and Koch loop, e.g.). Then, the principle of defected ground structure is described, and a combination of fractal motives with a defected ground structure is briefly introduced. Properties of investigated structures are verified by CST Microwave Studio and Ansoft HFSS. Second, different defected ground structures under the 50 transmission line are designed, and conventional equivalent filters are created. Filters are simulated and compared. In final, the investigated filters are recalculated for the substrate Arlon 25N, simulated, manufactured, measured and confronted with a conventional filter on the defected ground substrate.
|
6 |
Defected Ground Structure And Its Applications To Microwave Devices And Antenna Feed NetworksKilic, Ozgehan 01 September 2010 (has links) (PDF)
This thesis reports the analysis of the rectangular shaped defected ground structure
(RS-DGS) and the application of the structure on some microwave devices. DGS is analyzed
in terms of its superior properties, which enables the designers to easily realize
many kind of microwave devices which are impossible to achieve with the standard applications.
Within the scope of this thesis, the focus is on the rectangular shaped DGS
and its characteristic properties. The basic slow wave and high impedance characteristics
are utilized in the design of some microwave devices. The design is carried on at the two
different frequency bands: X-band and Ka band, centering at 10 GHz and 35 GHz, respectively.
Finally, using the high impedance property and the coupling between the
defects, a wide band 1 : 4 beam forming network is designed and implemented at
10 GHz.
|
7 |
MIKROPÁSKOVÉ FILTRY S VYUŽITÍM NARUŠENÉ ZEMNÍ PLOCHY / MICROSTRIP FILTERS USING DEFECTED GROUND STRUCTUREVágner, Petr January 2009 (has links)
The thesis deals with the microstrip filter design using defected ground structure (DGS). The difference between standard asymmetric microstrip technique and DGS is in using the structures etched in the microwave substrate ground plane. The DGS resonant characteristics are then used in filter design. The thesis consists of three factual parts. The first one (chapter 4) introduces the use of the DGS resonators in the lowpass filter design. It involves experimental analysis of one type of the lowpass filter. The second part (chapter 5) deals with a novel microstrip lowpass filter design method using DGS. The proposed method is verified by simulations and several samples are realized and measured. Finally, the third part (chapters 7 and 8) deals with the bandpass filter design using specific defected ground structure as a resonator. The resonators are used in a coupled resonator structure. Filters of various orders and resonator configurations are designed and simulated. A combination of the DGS resonators and half-wavelength microstrip resonators is introduced as well. Selected samples are realized and measurement results are compared with simulations.
|
Page generated in 0.0935 seconds