Sediment sampling, bathymetric data, and seismic reflection profiling were used to classify sediment deposition patterns on the Carnegie Ridge. Core sampling was used to relate compositional characteristics between equivalent areas, and seismic profiling to establish vertical variations. Three study areas were selected based on core distribution along the ridge. Grids of the following parameters were obtained: slope, elevation, percentage of carbonate, SiO2, and organic carbon contents. The general CaCO3 content distribution is highest on the ridge except in the areas affected by terrigenous deposition from the mainland, and volcanic debris from Galapagos Volcanic Platform. The general SiO2 content distribution is highest south of the Equator, bordering the west ridge. The organic carbon content is high in the equatorial upwelling area and close to the mainland. The relationship between organic carbon and carbonate was determined through correlation analysis. Based on those analyses, and considering the mixture of sedimentary sources and tectonic processes, the carbonate sediment is more important to this area. Sediments on the Carnegie Ridge above the lysocline are affected by three different types of processes controlling the sediment deposition. The first is the location of the high productivity zone in which pelagic settling is the source of sediment. The second is the difference in sea water properties between the Panama and Peru Basins surrounding the ridge, which creates different depositional environments. These properties create horizontal and vertical variations within water masses. Intermediate depths are affected by northward Pacific Central Water and bottom waters by northward Pacific Deep Water. The deflection of the bottom water flow by the existence of the Carnegie Ridge as a natural barrier produces scouring effects on the south flank. The third process controlling deposition is underwater dissolution on the saddle and east ridge by organic carbon degradation, which is enhanced by bottom water flow. Significant differences in sedimentation types were found in areas with hilltops, contrasted slopes, and slope bases, primarily related to changing depths and water flows, and lateral transport along the steepest north scarp.

Sediment sampling, bathymetric data, and seismic reflection profiling were used to classify sediment deposition patterns on the Carnegie Ridge. Core sampling was used to relate compositional characteristics between equivalent areas, and seismic profiling to establish vertical variations. Three study areas were selected based on core distribution along the ridge. Grids of the following parameters were obtained: slope, elevation, percentage of carbonate, SiO2, and organic carbon contents. The general CaCO3 content distribution is highest on the ridge except in the areas affected by terrigenous deposition from the mainland, and volcanic debris from Galapagos Volcanic Platform. The general SiO2 content distribution is highest south of the Equator, bordering the west ridge. The organic carbon content is high in the equatorial upwelling area and close to the mainland. The relationship between organic carbon and carbonate was determined through correlation analysis. Based on those analyses, and considering the mixture of sedimentary sources and tectonic processes, the carbonate sediment is more important to this area. Sediments on the Carnegie Ridge above the lysocline are affected by three different types of processes controlling the sediment deposition. The first is the location of the high productivity zone in which pelagic settling is the source of sediment. The second is the difference in sea water properties between the Panama and Peru Basins surrounding the ridge, which creates different depositional environments. These properties create horizontal and vertical variations within water masses. Intermediate depths are affected by northward Pacific Central Water and bottom waters by northward Pacific Deep Water. The deflection of the bottom water flow by the existence of the Carnegie Ridge as a natural barrier produces scouring effects on the south flank. The third process controlling deposition is underwater dissolution on the saddle and east ridge by organic carbon degradation, which is enhanced by bottom water flow. Significant differences in sedimentation types were found in areas with hilltops, contrasted slopes, and slope bases, primarily related to changing depths and water flows, and lateral transport along the steepest north scarp.

<p> The transition from the Wapiabi Formation to the Belly River Formation was studied in two outcrops, Highwood 1 and 2, near Longview, Alberta. The lowest units in the stratigraphic sections consist of deep marine, storm-generated density flow deposits interbedded with shales. They are overlain by dominantly crossbedded sandstones deposited in a marine environment which was dominated by shallow water processes. At Highwood 1, the next deposits are those of a braided fluvial system, which consist of crossbedded sandstones and much conglomerate. There is no shale. At Highwood 2, the fluvial deposits consist of thick sandstone units separated by thick dominantly shale units, with some roots. The uppermost units are again marine sandstones and shales. This return to marine conditions has not been mentioned previously in the literature. </p> <p> Paleoflow directions indicate that regional paleoslope dipped northwest at the base of the sections, but northeast in the fluvial parts. It is suggested that the slow rate of deposition in the Coniacian and Santonian, coupled with slow subsidence, permitted topographic expression of a northwest trending trough between the emerging Cordillera and the Aptian Ridge. In the Campanian, the trough was filled in with Belly River sediments, so that the paleoflow swung toward the northeast. </p> <p> Petrographic studies show that these sediments are much like those in the Belly River in the Milk River area, studied by Ogunyemi and Hills (1977) . </p> / Thesis / Bachelor of Science (BSc)

This study describes the structural and depositional evolution in the KH field in West Natuna Basin, Indonesia. Data for the study were acquired by three-dimensional (3D) seismic reflection volume and a complete suite of well logs. The regional basin underwent transtensional, sinistral shear during the rift phase that reactivated during the early to middle Miocene inversion as a traspressional, dextral shear. The study identified four periods of tectonic activity in the area which are extension, quiescence, compression and another period of quiescence. A structural closure developed along a series of north-south trending, normal splay faults defines the area's trap play. Understanding how this structural play fits into the regional tectonic picture may suggest new approaches to hydrocarbon exploration in the area.

The Virginia Solite Quarry assemblage of Tanytrachelos ahynis, with its exceptionally abundant and uniquely preserved specimens, offers an opportunity to quantify multiple aspects of vertebrate taphonomy. The presence or absence of 128 skeletal elements (i.e., bones) as well as the presence or absence of 136 skeletal variables (i.e., morphometric dimensions) were recorded for 100 specimens collected from two distinct layers within the quarry (lake cycles 2 and 16). Anatomical specimen completeness (or the percent of bones/variables present in a specimen) is low (the median specimen preserves 14.5% of bones and 11.8% of measured variables) in spite of protection from high energy currents, predators, and scavengers afforded by anoxic bottom waters. Specimen size, as approximated by femur length, does not significantly impact specimen completeness. Also, post-exhumation weathering, duration of exposure before burial, and morphotype groupings do not appear to have significantly affected anatomical specimen completeness or articulation. Presence or absence of the enigmatic heterotopic bones represents a true biological signal as indicated by the lack of significant difference in anatomical specimen completeness between the two morphotypes as well as qualitative taphonomic evidence. When anatomical specimen completeness has been corrected for post-depositional faulting, lake cycles 2 and 16 differ from one another significantly in terms of articulation and anatomical completeness of specimens. Specimens with soft-bodied preservation are significantly more articulated, but not significantly more complete, than specimens without preserved soft tissues. Preservation frequency of bones/variables (or the percent of specimens in which a bone/variable is present) varies greatly, but is generally low (an average skeletal element is present in 19% of specimens and an average variable can be measured in 12% of specimens), with significant preferential removal of smaller skeletal elements. Hind limbs, specifically femora, are most commonly preserved. Low anatomical specimen completeness and positive correlation between bone size and frequency of preservation both indicate specimen disturbance by minor hydraulic currents. These taphonomic patterns suggest a moderate-depth depositional environment (slightly shallower than previously proposed). / Master of Science

Beacon Supergroup rocks of probable Devonian age, containing conglomerate clasts of lithologies unknown in outcrop in southern Victoria Land (SVL) occur in the St Johns Range to Bull Pass Region, SVL, Antarctica. The Lower Taylor Group sedimentary rocks, herein called the Sperm Bluff Formation, unconformably rest on the regionally extensive Kukri Erosion Surface that truncates local basement. The basement complex includes three Plutonic Suites, Dry Valley (DV) 1a, DVIb and DV2 of the Granite Harbour Intrusives that intrude metasedimentary rocks of the Koettlitz Group. Allibone et al. (1993b) suggested a SVL terrane accretion event may have occurred about the same time as accretion of a terrane known as the Bowers terrane in northern Victoria Land (NVL) based on changing chemistry of the CambroOrdovician granitoids. Further, it is suggested that conglomerate clasts of the Sperm Bluff Formation may have been derived from this postulated terrane (Allibone et al., 1993b; and Turnbull et al., 1994). Following extensive fieldwork provenance studies and basin analysis of the sedimentary Sperm Bluff Formation are used here to test these ideas. The Sperm Bluff Conglomerate of Turnbull et al. (1994) is re-interpreted as the Sperm Bluff Formation and described using a lithofacies-based approach. The Sperm Bluff Formation is divided into six lithofacies including 1) Conglomerate Lithofacies; 2) Pebbly Sandstone Lithofacies; 3) Crossbedded Sandstone Lithofacies; 4) Parallelbedded Lithofacies; 5) Low-angle Crossbedded Lithofacies; and 6) Interbedded Siltstone/Sandstone Lithofacies. The intimate field association of the Conglomerate, Pebbly Sandstone and Crossbedded Sandstone Lithofacies ties them to the Conglomerate Lithofacies Association whereas the other three units are independent. The Conglomerate Lithofacies Association is interpreted to represent a wavedominated deltaic environment, based on the presence of broad channels, pervasive crossbedding, paleocurrent and trace fossil data. Both Parallel-bedded and Low-angle Crossbedded Sandstone Lithofacies are interpreted as a foreshore-shore face shallow marine setting on the basis of low-angle crossbeds and trace fossil assemblages. The Interbedded Siltstone and Sandstone Lithofacies is interpreted as an estuarine environment based on alternating siltstone/sandstone beds and the presence of flaser and lenticular bedding, small crossbedded dune sets, mud drapes, syneresis cracks and diverse paleocurrent directions. An estuarine setting is tentatively favoured over a lagoonal setting due to the presence of syneresis cracks small channels and the proximity to a river delta. I suggest that the Sperm Bluff Formation is likely a lateral correlative of the Altar Mt Formation of the Middle Taylor Group, in particular the Odin Arkose Member. This interpretation is based on arkosic nature of the sedimentary rocks, regional paleocurrent patterns, the presence of salmon pink grits at Gargoyle Turrets and trace fossil assemblages. The upper most lithofacies at Mt Suess, the Low-angle Crossbedded Sandstone Lithofacies that only occurs at this site is- suggested as a lateral correlative to the Arena Sandstone, which stratigraphically overlies the Altar Mt Formation, based on quartzose composition, clay matrix, stratigraphic position and trace fossils present. Provenance analysis was carried out on sedimentary rocks and conglomerate clasts using clasts counts of conglomerates, petrographic analysis of clasts, point counts of sandstones and clasts, geochemistry and V-Pb detrital zircon analysis. Conglomerate clasts lithologies include dominantly silicic igneous clasts and finely crystalline quartzite clast amongst other subordinate lithologies such as vein quartz, schist, schorl rock, gneiss and sandstone. Despite past identification of granitoid clasts in the Sperm Bluff Formation (Turnbull et al., 1994), none were found. Rhyolitic clasts of the Sperm Bluff Formation have compositions typical of highly evolved subduction related rocks, although they have undergone post-emplacement silicification. Wysoczanski et al. (2003) date rhyolite and tuff clasts between 497±17 Ma and 492±8 Ma, placing them within error of all three Dry Valley Magmatic Suites and removing the likelihood of correlation to NVL volcanic rocks. Petrographic analysis suggests they are components of a silicic magmatic complex. Chemically the volcanic clasts appear to represent a single magmatic suite (Sperm Bluff Clast Suite), and are clearly related to the Dry Valley Plutonic Suites. Although clasts are not constrained beyond doubt to one Suite, DV2 is the best match. Quartzite clasts of the Sperm Bluff Formation are too pure and old to be derived from a local source. Detrital zircon V-Pb ages for the quartzite suggest zircons were derived from the East Antarctic Craton, and that the quartzite source rocks were deposited prior to the Ross-Delamarian Orogeny. Quartzite with a similar age signature has not been identified; however, the Junction Formation sandstone of northwest Nelson has a similar age spectrum. Sandstones from the Sperm Bluff Formation indicate derivation from a felsic continental block provenance, which contain elements of volcanic, hyperbyssal and plutonic rocks. They are arkosic to quartzose in composition and conspicuously lack plagioclase. Detrital zircon analyses give a strong 500 Ma peak in all 3 samples, characteristic of a Ross-Delamarian Orogen source, with few other peaks. The dominance of a single peak is highly suggestive oflocal derivation. The sedimentary rocks of the Sperm Bluff Formation are interpreted to be derived predominantly from the basement rocks they now overlie. The presence of the regionally extensive Kukri Erosion Surface at the lower contact of the Beacon Supergroup rocks implies an intermediate source must have existed. This most likely contained all components of the formation. I suggest that the DV2 Suite was emplaced in a subsiding, extensional intra-arc setting. Erosion of the uplifted arc region probably occurred from Late Ordovician to Silurian times with deposition of sediments in a subsiding intra-arc basin. Erosion of the rhyolitic complex in this region probably occurred, however, it is likely that some was preserved. Inversion of this basin prior to the Devonian probably provided the means for these sediments to be deposited as the Sperm Bluff Fonnation.

Coal seams in the Waikato Coal Measures can vary significantly in thickness over distances of hundreds of meters to kilometers. Previously, the primary depositional controls on these variations have been inferred to be syn-depositional normal faulting and pre-depositional paleotopography. The data presented in support of these models are typically equivocal and which, if any, of these processes provide the principal control on the geometry and spatial distribution of coal seams in the Waikato Coal Region is uncertain. This study utilizes a large database of drill-logs, seismic-reflection lines and mine exposures in four areas (Huntly, Maramarua, North HuntlylWaikare and Rotowaro Coalfields) to test whether syn-depositional faulting and/or paleotopography influence coal seam architecture. These data were used to construct cross sections across faults and basement topography, which in turn, offer information on the relative timing of faulting and coal measure deposition, together with information on the spatial relations between seam thicknesses, faulting and paleotopography. Cross sections and isopach maps together with examination of spatial and temporal variations in fault displacements reveal that syn-depositional normal faulting had little or no impact on the deposition of the Waikato Coal Measures. Only in the Maramarua study area was any evidence found of fault control on coal measure deposition, with the Landing Fault accruing displacement between deposition of the Kupalrupa Seam and the end of coal measure sedimentation. The vast majority of faults in the Waikato Coalfield were, however, active following coal measure deposition. For example, the Foote, Kimihia and Pukekapia faults show evidence of displacement accrual, which commenced during deposition of the Mangakotuku Formation (37-35 Ma BP). The duration of this episode of faulting is difficult to determine, but may have ceased about 30 Ma ago. In addition, a number of faults (e.g. Foote Fault) display evidence oflate stage extension during the last 5 Ma. Given the lack of stratigraphic evidence for fault displacements during deposition of coal measures, it is suggested that the Mangakotuku and Waipuna basement scarps are erosional rather than tectonic features. Cross sections, together with structure contour and isopach maps in each of the four study areas examined, indicate that basement topography was the dominant control on the spatially variable accumulation of peat. These data show coal seams both thinning into, and away from, topographic lows. To account for this observation a model is proposed, in which peat accumulation is controlled by basement relief and sediment supply to parts of the depositional system. In the model it is postulated that the Waikato Coal Measures depositional system was a continuum between two end members. In one end member, with a high sediment supply, sediment is channeled into the lowest topographic areas and peat accumulates mainly on topographic highs. In the other end member, with little or no sediment supply, peat accumulates to its greatest thickness in areas of relatively low topography, in addition to on basement ridges. In the Rotowaro and North Huntly/Waikare study areas, the thickest peat developed on basement highs and the lows acted as a conduit for sedimentation. On basement highs, peat mires were largely sheltered from clastic sediment influx. In the Huntly East and Maramarua study areas, the thickest peat accumulated in basement lows, with comparable clastic sedimentation in highs and lows. The proposed model has application to other coalfields where peat accumulated on an undulating topographic surface and sediment supply was channelised. Prediction of coal seam thickness, as well as lithological types, is crucial in coal exploration and development. The methodology developed and employed in this study can be applied to other basins to access and model coal and clastic sediment distribution.

>Magister Scientiae - MSc / This study is located within the Bredasdorp Basin which is on the southern continental margin, offshore South Africa. The basin is located between Infanta and Agulhas arches and is a rift basin that is southeastern trending. Sedimentology reports have shown that the basin is predominantly filled by Aptian to Maastrichtian deposits which overlays pre-existing late Jurassic to Early Cretaceous fluvial and shallow marine syn-rift deposits. Devonian Bokkeveld Group slates and or Ordovician-Silurian Table Mountain Group quartzites are shown to be the composition of basement rocks. The study area incorporates only three wells for this research; well F-AH1, F-AH2 and F-AR1. This paper was completed through analyzing and juxtaposing interpretations of results from gamma ray wireline log analysis with core analysis in which these correlations and figures were displayed using Petrel software and Coral Draw respectively. Core analysis resulted in the identification of, sixteen litho-facies for the entire study, which were recognized according to its grain size, texture, sedimentary structures, colour changes, base and top contacts, bioturbation, noticeable minerals, etc. Facies tend to alternate all the way through each well and between different wells with similar facies being present in different wells, but they are not evident in all the cores. Based on the classification of sand bodies, core analysis provides good indication that the general depositional environment of reservoirs within the studied wells are within a marginal marine depositional environment which are tidally influenced. Log signatures typical of sandstone reservoir bodies were discovered in the field where sand bodies are 20 m thick or less and were recognized in the study area. Depositional environments were characterized based on depositional environment similarities: a funnel-shaped facies representing a crevasse splay; a cylindrical-shaped facies representing slope channel-fills representing the transgressive-regressive shallow marine shelf.

The sequence stratigraphy, depositional systems and reservoir geology of the lower and middle Oligocene Frio Formation in the Red Fish Bay field, Nueces County, Texas, are examined based on 1,800 feet (548.6 m) of core, 28 wireline-logs and 30 mi2 of 3-D seismic data. The study interval is composed of an incomplete 3rd-order stratigraphic sequence with an incomplete lowstand systems tract (LST), a complete transgressive systems tract (TST) and an incomplete highstand system tract (HST). This 3rd-order succession is divided into 12 4th-order sequences with average thickness of 150 feet (45.7 m). The lowstand system tract (LST) from 4th-order sequence 1 to 4th-order sequence 7 displays an aggradational stacking pattern in cross-sections. The regressive part of each 4th-order sequence has an upward-coarsening trend that reflects a transition of depositional environments from offshore to lower, middle and upper shoreface. The transgressive part of each 4th-order sequence exhibits an upward-fining trend, commonly associated with backstepping cycles composed of shoreface, washover-fan, and back-barrier lagoonal deposits. Sandstone maps of 4th-order sequence and stratal-slice maps from 3-D seismic data within 3rd-order lowstand system tracts display a strike-elongate geometry, indicating wave-dominated depositional systems. The 3rd-order transgressive system tract (TST) displays a retrogradational stacking pattern in cross-sections. The overall upward-fining trend records water deepening during transgression, interpreted as a transition from lower-shoreface to shelf environments. The 3rd-order highstand system tract (HST) from 4th-order sequence 8 to 4th-order sequence 12 displays a progradational stacking pattern in cross-sections. It is upward-coarsening and upward-thickening, indicating a transition from to distal- to proximal-shoreline setting. The geometry of framework sandstone bodies, inferred from gross-sandstone and stratal-slice maps is relatively lobate, suggesting a wave-modified deltaic system. The sandstone body continuity is very good and heterogeneity is very low within shoreface or wave-dominated deltaic systems in LST and HST sequences in Redfish Bay. Sandstone thickness expands towards the growth fault, owing to structurally controlled accommodation, but is thicker in the southwest part of study area, where it is controlled by paleogeomorphology, related to the presence of a deltaic depocenter. The sandstone body thickness of each 4th-order sequence is as much as 240 ft (73.2 m) and commonly ~100 ft (30.5 m) in average. Sandstone development in the study succession is controlled by the sequence stratigraphic context, and modification by depositional processes. The average porosity and permeability of study interval are 19.4% and 33.6 md respectively. Lithology is the main control on porosity and permeability. Sedimentary and biogenic structures also modify grain-size sorting, indirectly affecting porosity and permeability. Reservoir quality in LST is higher than that in the HST, as the depositional environment in LST is within proximal-delta-front facies, whereas in the HST is within distal-delta-front facies. Reservoir quality varies greatly within each 4th-order sequence, owing to different levels of intensity in bioturbation per each sandstone bed. / text

Campanian M1 Sandstone is one of the major prospective sandstone units in the Tarapoa field in Oriente Basin, Ecuador. The M1 Sandstone is always markedly sharp based, averages 25 m in thickness, shows upward increasing marine bioturbation and generally fines upward from coarse to very fine grained sandstone. In cores, the sandstones at base are amalgamated coarse to fine grained with prominent cross stratification (dm thick), sometimes clearly bi-directional and contains mud drapes. These suggest strong tidal or fluvial-tidal currents in estuary channels or delta distributary channels. The finer grained intervals in the middle are brackish-water intensely bioturbated and dominated by mud drapes, wavy and flaser bedding suggestive of intertidal flats. Associated overlying coals and coaly shales suggest supratidal conditions. The sandstones at top are cross stratified and contain mud drapes. These again suggest strong tidal or fluvial-tidal currents in estuary channels or delta distributary channels. The stacking pattern of facies in M1 Sandstone reveals the evolution of the M1 depositional system, as well as the sequence stratigraphy of M1 sandstone. The evolution includes four stages of deposition which indicates an initial sea level rise, a subsequent sea level fall, and another sea level rise. Lateral sand-mud heterogeneity exists in the study area, forming “shale barriers”, i.e. elongate shale-rich zones that are lateral barriers to hydrocarbon migration. They are interpreted to be abandoned tidal channels filled with muddy tidal flat deposits during the sea level fall. An alternative hypothesis was established to explain the stacking pattern of facies in M1 Sandstone. A tide-dominated delta with poor fluvial input experienced intense tidal erosion and produced a sharp base at the base of M1 Sandstone. Then subtidal sand bars, intertidal flats, and supratidal sediments were deposited in sequence during a continuous regression. The core and well logs in an extension of the study area in the northwest is interpreted as more distal open shelf deposits, beyond the mouth of the Tarapoa estuary system, where transgressive tidal shelf ridges were coeval with the Tarapoa estuary system. This interpretation allows us to predict the environment between the two areas as a transition zone between tide-dominated estuary and open shelf. / text