In this study, various stability control systems are developed to remove the lateral instability of a conventional articulated steer vehicle (ASV) during the oscillatory yaw motion or “snaking mode”. First, to identify the nature of the instability, some analyses are performed using several simplified models. These investigations are mainly focused on analyzing the effects of forward speed and of two main subsystems of the vehicle, the steering system and tires, on the stability. The basic insights into the stability behavior of the vehicle obtained from the stability analyses of the simplified models are verified by conducting some simulations with a virtual prototype of the vehicle in ADAMS. To determine the most critical operating condition with regard to the lateral stability and to identify the effects of vehicle parameters on the stability, various studies are performed by introducing some modifications to the simplified models. Based on these studies, the disturbed straight-line on-highway motion with constant forward speed is recognized as the most critical driving condition. Also, the examinations show that when the vehicle is traveling with differentials locked, the vehicle is less prone to the instability. The examinations show that when the vehicle is carrying a rear-mounted load having interaction with ground, the instability may happen if the vehicle moves on a relatively good off-road surface. Again, the results gained from the analyses related to the effects of the vehicle parameters and operating conditions on the stability are verified using simulations in ADAMS by making some changes in the virtual prototype for any case. To stabilize the vehicle during its most critical driving condition, some studies are directed to indicate the shortcomings of passive methods. Alternative solutions, including design of different types of stability control systems, are proposed to generate a stabilizing yaw moment. The proposed solutions include an active steering system with a classical controller, an active torque vectoring device with a robust full state feedback controller, and a differential braking system with a robust variable structure controller. The robust controllers are designed by using simplified models, which are also used to evaluate the ability to deal with the uncertainties of the vehicle parameters and its variable operating conditions. These controllers are also incorporated into the virtual prototype, and their capabilities to stabilize the vehicle in different operating conditions and while traveling on different surfaces during the snaking mode are shown.

In this study, various stability control systems are developed to remove the lateral instability of a conventional articulated steer vehicle (ASV) during the oscillatory yaw motion or “snaking mode”. First, to identify the nature of the instability, some analyses are performed using several simplified models. These investigations are mainly focused on analyzing the effects of forward speed and of two main subsystems of the vehicle, the steering system and tires, on the stability. The basic insights into the stability behavior of the vehicle obtained from the stability analyses of the simplified models are verified by conducting some simulations with a virtual prototype of the vehicle in ADAMS. To determine the most critical operating condition with regard to the lateral stability and to identify the effects of vehicle parameters on the stability, various studies are performed by introducing some modifications to the simplified models. Based on these studies, the disturbed straight-line on-highway motion with constant forward speed is recognized as the most critical driving condition. Also, the examinations show that when the vehicle is traveling with differentials locked, the vehicle is less prone to the instability. The examinations show that when the vehicle is carrying a rear-mounted load having interaction with ground, the instability may happen if the vehicle moves on a relatively good off-road surface. Again, the results gained from the analyses related to the effects of the vehicle parameters and operating conditions on the stability are verified using simulations in ADAMS by making some changes in the virtual prototype for any case. To stabilize the vehicle during its most critical driving condition, some studies are directed to indicate the shortcomings of passive methods. Alternative solutions, including design of different types of stability control systems, are proposed to generate a stabilizing yaw moment. The proposed solutions include an active steering system with a classical controller, an active torque vectoring device with a robust full state feedback controller, and a differential braking system with a robust variable structure controller. The robust controllers are designed by using simplified models, which are also used to evaluate the ability to deal with the uncertainties of the vehicle parameters and its variable operating conditions. These controllers are also incorporated into the virtual prototype, and their capabilities to stabilize the vehicle in different operating conditions and while traveling on different surfaces during the snaking mode are shown.

The main goal of this work is to gain knowledge of how and to what extent state-of-the-artsimulation tools can be used in a conceptual development phase for vehicle dynamics control atVolvo Car Corporation (VCC).The first part of the thesis deals with an evaluation of vehicle dynamics simulation tools and theiruses. The three simulation tools selected for the study, namely Mechanical Simulation CarSim 8.2.1,IPG CarMaker 4.0.5, and VI-Grade CarRealTime V14, are briefly described and discussed. In order toevaluate and compare these tools with respect to application for vehicle dynamics control, a criterialist is developed covering aspects such as tool requirements and intended usage. Based on thecriteria list and certain identified drawbacks, a ranking of the tools is made possible. Furthermore,the process of developing vehicle models for the different tools is discussed in detail, along with theprocedure of validating the vehicle models.In the second part, the concept of Collision Avoidance Driver Assistance (CADA) function isintroduced and possible approaches for developing CADA functions are discussed in brief. It isimportant to note that the CADA functions in this work are based on cornering the vehicle i.e.maneuvering around the threat, rather than solely reducing vehicle speed. A number ofimplementations of the functions are developed in Simulink. A frequency analysis of a simplifiedlinear vehicle model is performed to investigate the influence of steering, differential braking, andtheir combination on the resultant lateral displacement of the vehicle during an evasive maneuver.The developed CADA functions are then simulated using the vehicle simulation tools. Two specificmetrics - Lateral Displacement gain and DeltaX - are formulated to evaluate the effectiveness of theCADA functions. Based on these metrics, the assistance obtained due to the functions for a specificevasive maneuver is compared.From the evaluation process of the three tools, two were considered suitable for the purpose ofsimulating collision avoidance functions. The evaluation of the CADA functions demonstrates thatcombined assistive steering with differential braking provides considerable assistance in order toavoid collisions. The simulation results also present interesting trends which provide a usefuldirection regarding the conditions for intervention by such collision avoidance functions during anevasive maneuver. The use of simulation tools makes it possible to observe these trends and utilizethem in the development process of the functions.