Impact of drops on a dry smooth surface was studied at elevated chamber pressures and low Reynold's numbers to characterize the effect of chamber pressure on drop splashing and spreading. Two drop sizes of methanol, ethanol, propanol, hexadecane and diesel were tested for impact speeds between 1.5 - 3.3 m/s and pressure of upto 12 bars. Splash ratio, unlike the results of Xu et al, increased sharply with decreasing impact speed suggesting that drop speed is a more critical parameter for splash. Drop splashing was also found to be affected by drop shape, with drop distortion having a significant impact on splash promotion or suppression. In accordance with existing theory, drop spreading and maximum spread factor were found to be independent of pressure in the regime tested. These observations provide new insights and comparison data for evaluating and modeling the behavior of alternate fuels like ethanol.

This study looked at the effect relative humidity had on respirator performance.

The Boosted Fast Flux Loop (BFFL) will expand the Advanced Test Reactor (ATR) at Idaho National Laboratory. Part of the BFFL is a new corrosion test cap section for testing in the ATR. The corrosion test cap section was designed with parallel channels to reduce the pressure drop and allow coolant contact with specimens. The fluid experiment conducted by Idaho State University found the pressure drop not characteristic of parallel channel flow but greater than without parallel channels. A Computation Fluid Dynamics simulation using STAR-CCM+ was conducted with the objectives of showing sufficient flow through the test cap section for a corrosion test, verifying the fluid experiment's validity, and explaining the abnormal pressure drop. The simulation used a polyhedral volume mesh and the k-e turbulent model with segregated equations. Convergence depended on a low continuity residual and an unchanging pressure drop result. The simulation showed the same pattern as the fluid experiment. The simulation provided evidence of flow through the test cap section needed for a corrosion test. The specimen holding assembly was found to be a small contributor to the pressure drop. The counterintuitive pressure drop was found to be the sum of many factors produced from the geometry of the test cap section. The inlet of the test cap section behaved as a diverging nozzle before a sudden expansion into the test cap section chamber with both creating a pressure drop. The chaotic flow inside the chamber gave rise to pressure loss from mixing. The fluid exited the chamber through a sudden contraction to a converging nozzle behaving exit, again, producing a pressure drop. By varying the flow rate in the simulation, a disturbance in the flow where the gap fluid separated into the parallel channels was found at high flow rates. At low flow rates the pressure drop anomaly was not found. The corrosion test cap section could be used in the ATR but with a higher pressure drop than desirable. The design of the corrosion test cap section created the abnormal pressure drop.

The implementation of Wavelength Division Multiplexing system (WDM) optical fibre transmission systems has the potential to realise this high capacity data rate exceeding 10 Tb/s. The ability to reconfigure optical networks is a desirable attribute for future metro applications where light paths can be set up or taken down dynamically as required in the network. The use of microelectronics in conjunction with photonics enables intelligence to be added to the high-speed capability of photonics, thus realising reconfigurable optical devices which can revolutionise optical telecommunications and many more application areas. In this thesis, we investigate and demonstrate the capability of Opto-VLSI processors to realise a reconfigurable WDM optical device of many functions, namely, optical multiband filtering, optical notch filtering, and reconfigurable-Optical-Add-Drop Multiplexing (ROADM). We review the potential technologies available for tunable WDM components, and discuss their advantages and disadvantages. We also develop a simple yet effective algorithm that optimises the performance of Opto-VLSI processors, and demonstrate experimentally the multi-function WDM devices employing Opto-VLSI processors. Finally, the feasibility of Opto-VLSI-based WDM devices in meeting the stringent requirements of the optical communications industry is discussed.

External Studies has been in operation at Goulburn College of Advanced Education for ten years (1970 - 1980). During this time nearly 1,800 students have been involved in the external programmes. Over half of these students have not completed their studies. This field-study is an attempt to document the actual drop-out rates for the various programmes and to compare the results obtained with statistics available from other tertiary institutions in Australia and overseas. Factors such as student age and sex as related to achievement and time of withdrawal are investigated. The statistics are largely drawn from student files and a questionnaire distributed to a sample of external students. The main thrust of the study is to ascertain the reasons for student withdrawal in an attempt to reduce the attrition rates in the future. Drop-out was found to be the result of a number of contributing factors rather than deriving from any particular reason. The field-study shows that drop-out rates at Goulburn are somewhat similar to those experienced by other tertiary institutions, but that the attrition rate during the first semester of study is excessive.

<p>Syftet med studien var att undersöka huruvida självskattad känsla av skoltrötthet samvarierar med begriplighet, hanterbarhet och meningsfullhet vilka är delkomponenter i KASAM, känsla av sammanhang. Deltagarna var elever som studerar studie- respektive yrkesinriktade gymnasieprogram vid en gymnasieskola i Mälardalen (<em>N </em>= 97). Köns- och studieinriktningsdifferenser samt elevers egna kommentarer kring skoltrötthet var även av intresse. En tvådelad enkät konstruerades och delades ut till eleverna. Enkäten innehöll dels ett självskattningsformulär för att mäta känsla av skoltrötthet och dels Antonovsky´s livsfrågeformulär som mäter KASAM. Begreppet skoltrötthet kom på grund av lågt alfavärde att splittas till lärtrötthet, skolka för att orka, utmattad efter en skoldag samt känsla av otillräcklighet. Resultatet visade att elevers känsla av lärtrötthet samvarierade med meningsfullhet i skolan. Vidare fanns en svag tendens att lärtrötthet även samvarierade med hanterbarhet. Meningsfullhetskomponenten var en signifikant prediktor för lärtrötthet. Begriplighet fick signifikant högre skattning av männen. Inga signifikanta studieinriktningsskillnader förelåg.</p>

<p>Continuum mechanics is used to model the mechanical behaviour of concrete structures subjected to high rates of loading in defence applications. Large deformation theory is used and an isotropic elastic-plastic constitutive equation with isotropic hardening, damage and strain rate dependent loading surface. The hydrostatic pressure is governed by an equation of state. Numerical analysis is performed using the finite element method and the central difference method for the time integration.</p><p>Projectile penetration is studied and it is concluded that it is not suitable to use material description of the motion of both the target and the projectile together with an erosion criterion. Instead, the material description should be used only for the projectile and the spatial description for the target. In this way the need for an erosion criterion is eliminated. Also, in the constitutive model used it is necessary to introduce a scaling of the softening phase in relation to the finite element size, in order to avoid strain localization.</p><p>Drop weight testing of reinforced concrete beams are analysed, where a regularisation is introduced that renders mesh objectivity regarding fracture energy release. The resulting model can accurately reproduce results from material testing but the regularisation is not sufficient to avoid strain localization when applied to an impact loaded structure. It is finally proposed that a non-local measure of deformation could be a solution to attain convergence.</p><p>The third study presents the behaviour of a concrete constitutive model in a splitting test and a simplified non-local theory applied in a tensile test. The splitting test model exhibits mesh dependency due to a singularity. In the tensile test the non-local theory is shown to give a convergent solution. The report https://www.diva-portal.org/liu/webform/form.jsp#paper0is concluded with a discussion on how to better model concrete materials.</p>

<p>Cake filtration is a unit operation to separate solids from fluids in industrial processes. The build up of a filter cake is usually accompanied with a decrease in overall permeability over the filter leading to an increased pressure drop over the filter. For an incompressible filter cake that builds up on a homogeneous filter cloth, a linear pressure drop profile over time is expected for a constant fluid volume flow. However, experiments show curved pressure drop profiles, which are also attributed to inhomogeneities of the filter (filter medium and/or residual filter cake).</p><p>In this work, a mathematical filter model is developed to describe the relationship between time and overall permeability. The model considers a filter with an inhomogeneous permeability and accounts for fluid mechanics by a one-dimensional formulation of Darcy's law and for the cake build up by solid continuity. The model can be solved analytically in the time domain. The analytic solution allows for the unambiguous inversion of the model to determine the inhomogeneous permeability from the time resolved overall permeability, e.g. pressure drop measurements. An error estimation of the method is provided by rewriting the model as convolution transformation.</p><p>This method is applied to simulated and experimental pressure drop data of gas filters with textile filter cloths and various situations with non-uniform flow situations in practical problems are explored. A routine is developed to generate characteristic filter cycles from semi-continuous filter plant operation. The model is modified to investigate the impact of non-uniform dust concentrations.</p>

Thesis (M.B.A.)--North-West University, Potchefstroom Campus, 2009.

The purpose of this study was to examine the effects of landing on a combined inverted and plantarflexed surface on the ankle kinematics and electromyographic (EMG) activities of the medial gastrocnemius (MG), peroneal longus (PL) and anterior tibialis muscles (TA). Twelve recreational athletes performed five drop landings from an overhead bar of 30 cm height on to each of these surfaces: a flat surface, a 25° inversion surface (inverted), and a combined surface (combined) of 25° inversion and 25° plantarflexion. The three dimensional kinematic variables and integrated EMG (IEMG) of the three muscles were assessed using one-way repeated measures analysis of variance (ANOVA, p < 0.05) and a 3 × 3 (surface × muscle) ANOVA, respectively. The IEMG results showed a significant muscle by surface interaction. The flat surface induced higher TA activity than the two tilted surfaces. The inverted surface produced significantly higher inversion peak angle and velocity than the flat surface, but similar PL activity across the surfaces. The MG IEMG and ankle plantarflexion angle were significantly higher for the combined surface compared to the inverted surface. These findings suggest that compared to inversion, a combination of plantarflexion and inversion provides a more realistic surface for simulating lateral ankle sprains.