Spelling suggestions: "subject:"dualphase"" "subject:"dual_phase""
91 |
An Elevated-Temperature Tension-Compression Test and Its Application to Mg AZ31BPiao, Kun 20 October 2011 (has links)
No description available.
|
92 |
Coating of High Strength Steels with a Zn-1.6Al-1.6Mg Bath / Selective Oxidation and Reactive Wetting of High Strength Steels by a Zn-1.6Al-1.6Mg BathDe Rango, Danielle M. January 2019 (has links)
Recently, Zn-XAl-YMg coatings have emerged as lighter-weight substitutes for traditional Zn-based coatings for the corrosion protection of steels; however, little is currently known concerning the interactions between the oxides present on advanced high strength steel (AHSS) surfaces and the Zn-Al-Mg bath. In the current contri- bution, the selective oxidation and reactive wetting of a series of C-Mn AHSS were determined with the objective of providing a quantitative description of this pro- cess. The process atmosphere pO2 was varied using dew points of −50◦C, −30◦C and −5◦C. The surface oxide chemistry and morphology were analysed by means of SEM and XPS techniques. Reactive wetting of the selectively oxidized surfaces using a Zn-1.6 wt.% Al-1.6 wt.% Mg bath was monitored as a function of annealing time at 60 s, 100 s and 140 s at 800◦C. The resulting bare spot defects in the Zn-1.6 wt.% Al-1.6 wt.% Mg coating were assessed by means of SAM-AES and FIB, while coating adhesion was analysed by 180◦ bend tests. Annealing the steel substrates resulted in the formation of surface MnO, which varied based on pO2 and Mn alloy content, and that this MnO greatly reduced the wettability of the steel by the Zn-1.6 wt.% Al- 1.6 wt.% Mg bath, resulting in bare spot defects. It was determined that the reactive wetting of the steel substrate was dependant on the oxide morphology and oxidation mode, which was a function of both alloying content of Mn in the steel and annealing pO2 process atmosphere (dew point). Finally, it was concluded that the bare spot area percentage on the coated panels was statistically invariant for annealing times of between 60 s and 140 s at 800◦C. / Thesis / Master of Applied Science (MASc) / Metallic coatings are applied to steels that are not naturally corrosion resistant. The aim of this research was to determine how well a coating containing zinc, aluminum and magnesium adhered to high strength automotive steel. It was deter- mined that manganese oxides formed on the steel during heating prior to applying the metallic coating. The manganese oxides prevented good adhesion between the steel and the coating, resulting in bare spot defects in the coating. The bare spot defects are undesirable as they leave the steel exposed and therefore susceptible to corrosion and are unsightly when painted.
|
93 |
Výroba dvoufázových austeniticko-feritických korozivzdorných ocelí s využitím vakuové metalurgie / Manufacture of two-phase austenitic-ferritic stainless steels with the use of vacuum metallurgyTučková, Eva January 2018 (has links)
stainless steel, duplex steel, vakuum metallurgy, decarburization
|
94 |
微細複合組織金属の変形機構および塑性加工性に関する研究 / ビサイ フクゴウ ソシキ キンゾク ノ ヘンケイ キコウ オヨビ ソセイ カコウセイ ニカンスル ケンキュウ名取 恵子, Keiko Natori 22 March 2014 (has links)
ヘテロ構造組織を有する鉄・非鉄金属の組織形態に注目して,微視的構造やその挙動が巨視的現象(変形特性,成形性)として発現するメカニズムを解明することを目的とした.鉄系金属ではDual Phase型高張力鋼のスプリングバック現象のひずみ速度依存性,非鉄系金属では半凝固鋳造法と強ひずみ加工を組み合わせた亜共晶アルミニウム合金の衝撃後方押出し成形性に注目した.これらの検討によりいずれの試料においても,結晶粒界よりもスケールの大きいヘテロ構造に由来した変形機構が支配的であることが明らかになった. / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University
|
Page generated in 0.0338 seconds