No description available.

Abstract Wideband-CDMA (WCDMA) is a kind of third-generation wireless communication system. It can provide multi-rate services and fast transmission with wideband technology. To improve the solution of no enough wireless bandwidth currently, the 3G communication systems have been researched and developed in several leading countries recently. WCDMA adopts a kind of new spreading codes named Orthogonal Variable Spreading Factor codes (OVSF codes) that have advantages of dynamically variable rates and keeping orthogonality. OVSF codes can provide different data transmission rates by assigning codes with different lengths. By building a code tree, we can discuss some better schemes to assign available data rate. In this paper, we propose an efficient channel assignment scheme that can decrease the call blocking rate and complexity of channel reassignment procedure. Based on the properties of the binary code tree, we use code merge scheme to decrease channel reassignment rate and call blocking rate. This will efficiently improve the performance of channel assignment and spectral efficiency. Simulation results show that the proposed scheme has expected results.

International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California / The analysis of multiple-input multiple-output (MIMO) communication systems often assumes a static, or quasi-static, environment. Platform motion and changes in the environment makes this an unreasonable assumption for many telemetry applications. This paper uses computer simulations to characterize the time variation of MIMO channel parameters when there is relative motion between the transmitter and receiver. These simulation results yield explicit time intervals over which a MIMO channel can be considered static for a given relative velocity and propagation environment. These results can be used to predict the practical limitations of proposed MIMO system algorithms.

This dissertation presents and develops the Intelligent Picocell as a solution for high bit rate, efficient bandwidth indoor wireless communication. The research has examined different aspects of the indoor radio propagation environment and system implementation in order to highlight key benefits of the proposed architecture. Explosive growth in demand for indoor wireless communications motivates research into this novel radio architecture. The architecture should be capable of tailoring capacity and coverage to the needs of the specific indoor environment, while maximising spectral efficiency. The Intelligent Picocell is based on an evolution of the distributed antenna concept to provide macrodiversity, microdiversity and interference cancellation. The architecture is fully scalable to large numbers of users and can provide plug-and-play operation, with no need for detailed system planning beyond the antenna locations. The research examines different aspects of picocell system performance and design, including: Investigation on the indoor radio environment. Through measurements, the effects of building features on path loss and shadowing are analysed and propagation models are proposed for simulating picocell systems. Analysis of the Intelligent Picocell architecture, two algorithms are proposed for interference reduction, one based on a distributed narrowband optimum combiner and the other on a dynamic channel assignment and allocation scheme. Through simulation, it was demonstrated that the mobile transmitted power for an Intelligent Picocell is lower than the power required in a distributed antennas system. It was also shown that the capacity of the system depends on the number of antennas distributed in the building. Key words: Intelligent picocell, adaptive antennas, diversity, distributed antennas, dynamic channel allocation, propagation measurements.

In this thesis, we investigate several radio resourcemanagement (RRM) techniques and concepts in an indoorenvironment with a dense infrastructure. Future wireless indoorcommunication networks will very likely be implemented atplaces where the user concentration is very high. At these hotspots, the radio resources must be used efficiently. The goalis to identify efficient RRM techniques and concepts that aresuitable for implementation in an indoor environment. Handling the high level of co-channel interference is shownto be of paramount importance. Several investigations in thethesis point this out to be the key problem in an indoorenvironment with a dense infrastructure. We show that a locallycentralized radio resource management concept, the bunchconcept, can give a very high performance compared to othercommonly used RRM concepts. Comparisons are made withdistributed systems and systems using channel selection schemeslike CSMA/CA. The comparisons are primarily made by capacityand throughput analysis which are made by system levelsimulations. Results show that the centralized concept can give85 percent higher capacity and 70 percent higher throughputthan any of the compared systems. We investigate several RRM techniques to deal with thechannel interference problem and show that beamforming cangreatly reduce the interference and improve the systemperformance. Beamforming, especially sector antennas, alsoreduce the transmitter powers and the necessary dynamic range.A comparison is made between the use of TD/CDMA and pure TDMAwhich clearly shows the performance benefits of usingorthogonal channels that separates the users and reduces theco-channel interference. Different channel selection strategiesare studied and evaluated along with various methods to improvethe capability of system co-existence. We also investigate several practical measures to facilitatesystem implementation. Centralized RRM is suitable forguaranteeing QoS but is often considered too complex. With thestudied centralized concept the computational complexity can bereduced by splitting the coverage area into smaller pieces andcover them with one centralized system each. This reduces thecomplexity at the prize of lost capacity due to theuncontrolled interference that the different systems produce.Our investigations show that sector antennas can be used toregain this capacity loss while maintaining high reduction incomplexity. Without capacity loss, the computational complexitycan be reduced by a factor of 40 with sectoring. Theimplementation aspects also include installation sensitivity ofthe indoor architecture and the effect of measurement errors inthe link gains. The robustness against installation errors ishigh but the bunch concept is quite sensitive to largemeasurement errors in the studied indoor environment. Thiseffect can be reduced by additional SIR-margins of the radiolinks. The studied bunch concept is shown to be promising for usein future wireless indoor communication systems. It provideshigh performance and is feasible to implement. Keywords:Radio resource management, indoorcommunication, the bunch concept, centralized RRM, dynamicchannel allocation, channel selection, co-channel interference,power control, feasibility check, capacity, throughput, qualityof service, beamforming, downtilting, sector antennas,co-existence, computational complexity, sensitivity analysis,measurement errors, infrastructure, system implementation,WLAN, HiperLAN/2, IEEE 802.11.

<p>In this thesis, we investigate several radio resourcemanagement (RRM) techniques and concepts in an indoorenvironment with a dense infrastructure. Future wireless indoorcommunication networks will very likely be implemented atplaces where the user concentration is very high. At these hotspots, the radio resources must be used efficiently. The goalis to identify efficient RRM techniques and concepts that aresuitable for implementation in an indoor environment.</p><p>Handling the high level of co-channel interference is shownto be of paramount importance. Several investigations in thethesis point this out to be the key problem in an indoorenvironment with a dense infrastructure. We show that a locallycentralized radio resource management concept, the bunchconcept, can give a very high performance compared to othercommonly used RRM concepts. Comparisons are made withdistributed systems and systems using channel selection schemeslike CSMA/CA. The comparisons are primarily made by capacityand throughput analysis which are made by system levelsimulations. Results show that the centralized concept can give85 percent higher capacity and 70 percent higher throughputthan any of the compared systems.</p><p>We investigate several RRM techniques to deal with thechannel interference problem and show that beamforming cangreatly reduce the interference and improve the systemperformance. Beamforming, especially sector antennas, alsoreduce the transmitter powers and the necessary dynamic range.A comparison is made between the use of TD/CDMA and pure TDMAwhich clearly shows the performance benefits of usingorthogonal channels that separates the users and reduces theco-channel interference. Different channel selection strategiesare studied and evaluated along with various methods to improvethe capability of system co-existence.</p><p>We also investigate several practical measures to facilitatesystem implementation. Centralized RRM is suitable forguaranteeing QoS but is often considered too complex. With thestudied centralized concept the computational complexity can bereduced by splitting the coverage area into smaller pieces andcover them with one centralized system each. This reduces thecomplexity at the prize of lost capacity due to theuncontrolled interference that the different systems produce.Our investigations show that sector antennas can be used toregain this capacity loss while maintaining high reduction incomplexity. Without capacity loss, the computational complexitycan be reduced by a factor of 40 with sectoring. Theimplementation aspects also include installation sensitivity ofthe indoor architecture and the effect of measurement errors inthe link gains. The robustness against installation errors ishigh but the bunch concept is quite sensitive to largemeasurement errors in the studied indoor environment. Thiseffect can be reduced by additional SIR-margins of the radiolinks.</p><p>The studied bunch concept is shown to be promising for usein future wireless indoor communication systems. It provideshigh performance and is feasible to implement.</p><p><b>Keywords:</b>Radio resource management, indoorcommunication, the bunch concept, centralized RRM, dynamicchannel allocation, channel selection, co-channel interference,power control, feasibility check, capacity, throughput, qualityof service, beamforming, downtilting, sector antennas,co-existence, computational complexity, sensitivity analysis,measurement errors, infrastructure, system implementation,WLAN, HiperLAN/2, IEEE 802.11.</p>

abstract: Dynamic channel selection in cognitive radio consists of two main phases. The first phase is spectrum sensing, during which the channels that are occupied by the primary users are detected. The second phase is channel selection, during which the state of the channel to be used by the secondary user is estimated. The existing cognitive radio channel selection literature assumes perfect spectrum sensing. However, this assumption becomes problematic as the noise in the channels increases, resulting in high probability of false alarm and high probability of missed detection. This thesis proposes a solution to this problem by incorporating the estimated state of channel occupancy into a selection cost function. The problem of optimal single-channel selection in cognitive radio is considered. A unique approach to the channel selection problem is proposed which consists of first using a particle filter to estimate the state of channel occupancy and then using the estimated state with a cost function to select a single channel for transmission. The selection cost function provides a means of assessing the various combinations of unoccupied channels in terms of desirability. By minimizing the expected selection cost function over all possible channel occupancy combinations, the optimal hypothesis which identifies the optimal single channel is obtained. Several variations of the proposed cost-based channel selection approach are discussed and simulated in a variety of environments, ranging from low to high number of primary user channels, low to high levels of signal-to-noise ratios, and low to high levels of primary user traffic. / Dissertation/Thesis / M.S. Electrical Engineering 2014

The area of wireless transceiver design is becoming increasingly important due to the rapid growth of wireless communications market as well as diversified design specifications. Research efforts in this area concentrates on schemes that are capable of increasing the system capacity, providing reconfigurability/reprogrammability and reducing the hardware complexity. Emerging topics related to these goals include Software Defined Radio, Multiple-Input-Multiple-Output (MIMO) Systems, Code Division Multiple Access, Ultra-Wideband Systems, etc. This research adopts space diversity and statistical signal processing for digital interference suppression in wireless receivers. The technique simplifies the analog front-end by eliminating the anti-aliasing filters and relaxing the requirements for IF bandpass filters and A/D converters. Like MIMO systems, multiple antenna elements are used for increased frequency reuse. The suppression of both image signal and Co-Channel Interference (CCI) are performed in DSP simultaneously. The signal-processing algorithm used is Independent Component Analysis (ICA). Specifically, the fixed-point Fast-ICA is adopted in the case of static or slow time varying channel conditions. In highly dynamic environment that is typically encountered in cellular mobile communications, a novel ICA algorithm, OBAI-ICA, is developed, which outperforms Fast-ICA for both linear and abrupt time variations. Several practical implementation issues are also considered, such as the effect of finite arithmetic and the possibility of reducing the number of antennas.

This thesis provides three main contributions with respect to the Dynamic Channel and Power Assignment (DCPA) problem. DCPA refers to the allocation of transmit power and frequency channels to links in a cognitive dynamic spectrum network so as to maximize the total number of feasible links while minimizing the aggregate transmit power. In order to provide a method to compare related, yet disparate, work, the first contribution of this thesis is a unifying optimization formulation to describe the DCPA problem. This optimization problem is based on maximizing the number of feasible links and minimizing transmit power of a set of communications links in a given communications network. Using this optimization formulation, this thesis develops its second contribution: a evaluation method for comparing DCPA algorithms. The evaluation method is applied to five DPCA algorithms representative of the DCPA literature . These five algorithms are selected to illustrate the tradeoffs between control modes (centralized versus distributed) and channel/power assignment techniques. Initial algorithm comparisons are done by analyzing channel and power assignment techniques and algorithmic complexity of five different DCPA algorithms. Through simulations, algorithm performance is evaluated by the metrics of feasibility ratio and average power per link. Results show that the centralized algorithm Minimum Power Increase Assignment (MPIA) has the overall best feasibility ratio and the lowest average power per link of the five algorithms we investigated. Through assignment by the least change in transmit power, MPIA minimizes interference and increases the number of feasible links. However, implementation of this algorithm requires calculating the inverse of near singular matrices, which could lead to inaccurate results. The third contribution of this thesis is a proposed distributed channel assignment algorithm, Least Interfering Channel and Iterative Power Assignment (LICIPA). This distributed algorithm has the best feasibility ratio and lowest average power per link of the distributed algorithms. In some cases, LICIPA achieves 90% of the feasibility ratio of MPIA, while having lower complexity and overall lower average run time. / Master of Science

The traditional way of increasing capacity in a wirelesscommunication system has been cell splitting and fixedchannel-allocation based on prediction tools. However, theplanning complexity increases rapidly with the number of cellsand the method is not suitable for the large temporal andspatial traffic variations expected in the future. A lot ofresearch has therefore been performed regarding adaptivechannel allocation, where a channel can be used anywhere aslong as the signal-to-interference ratio (SIR) is acceptable. Acommon opinion is that these solutions must be decentralizedsince a centralized one would be overly complex. In this thesis, we study the locally centralizedbunch conceptfor radio resource management (RRM) in aManhattan environment and show that it can give a very highcapacity both for outdoor users and for indoor users covered byoutdoor base stations. We show how measurement limitations anderrors affect the performance and wepropose methods to handlethese problems, e.g. averaging of measured values, robustchannel selection algorithms, and increased SIR margins. Wealso study the computational and signaling complexities andshow that they can be reduced by splitting large bunches, usingsparse matrix calculations, and by using a simplified admissionalgorithm. However, a reduction of the complexity often means areduction of the system capacity. The measurements needed for RRM can also be used to find amobile terminal's geographical position. We propose and studysome simple yet accurate methods for this purpose. We alsostudy if position information can enhance RRM as is oftensuggested in the literature. In the studied scenario, thisinformation seems to be of limited use. One possible use is toestimate the mobile user's speed, to assist handover decisions.Another use is to find the location of user hotspots in anarea, which is beneficial for system planning. Our results show that the bunch concept is a promisingcandidate for radio resource management in future wirelesssystems. We believe that the complexity is manageable and themain price we have to pay for high capacity is frequentreallocation of connections. <b>Keywords:</b>bunch concept, radio resource management,network-assisted resource management, base station selection,dynamic channel allocation, DCA, channel selection,least-interfered, interference avoidance, interferenceaveraging, handover, power control, path-loss measurements,signal strength, link-gain matrix, TD-CDMA, UTRA TDD, Manhattanscenario, microcells, mobile positioning, position accuracy,trilateration, triangulation, speed estimation