Spelling suggestions: "subject:"esafety"" "subject:"ezsafety""
51 |
An investigation of safety training, safety climate and safety outcomes : a longitudinal study in a Malaysian manufacturing plantBahari, Siti Fatimah binti Binti January 2011 (has links)
Safety training and safety climate are widely researched topics in the area of safety management. Safety training, as one of the safety interventions, is believed to be an antecedent of safety climate improvement within organisations. The rapid advancement in the safety management field has also raised many questions, mainly regarding the roles of safety training and safety climate within organisations. Recent literature has viewed safety climate as a mediating variable between organisational policies and practices (such as safety training) and safety outcomes. Nevertheless, to date far too few attempts have been made to empirically study the impacts and influence of safety training on safety climate change and to subsequently improve safety outcomes over a period of time, especially in developing countries like Malaysia. To facilitate the expansion of current theoretical perspectives, the research attempts to improve our understanding of safety training's impact on achieving a positive safety culture (via safety climate changes), particularly with regard to improved safety outcomes over a period of time. A quantitative approach, using a longitudinal panel design, was employed for the purpose of data collection. The results were based on two data collections carried out in a Malaysian manufacturing plant in 2008 and 2009. The response rate was 83 percent (N=330) in Time 1, 2008 and 98 percent (N=402) in Time 2, 2009. The findings of this study revealed that there was a significant improvement in all safety training impact subscales indicating that employees' perceived their level of safety knowledge and skill transfer, safe work practices, and their understanding of safety and risk to all be higher in Time 2. The findings of this study also revealed significant improvements in the safety climate dimensions related to Management Attitude and Management Action, indicating that the management role has been viewed as crucial in improving and supporting employees' and organisations' safety. Over a period of time the positive correlation between safety training and safety climate became stronger with a significance difference of .005, where in Time 1, r=.740 and in Time 2, r=.745. This finding adds to the theoretical proposition that safety training is an antecedent to improving safety climate. Similarly, safety outcomes have significantly improved over a period of time and have a negative correlation with safety training and safety climate. Overall, the current study has gone some way towards enhancing our understanding of safety training impacts and its influence on safety climate, particularly with regard to the improvement of safety outcomes. However, this study has thrown up a number of questions that are in need of further investigation. The need for further research to investigate the effectiveness of specific safety training intervention with the addition of motivational factors, and its relation to safety climate over a period of time in various industries, remain crucial.
|
52 |
Safety in the Workplace: An Investigation into the Perceptions of a Behavioral Safety Modification Process in an Industrial/Manufacturing SettingJones, Joy Maria 22 May 2009 (has links)
This study examines safety perceptions of manufacturing employees involved in a safety behavioral modification process, and the perceptions of employees who are not involved in the same process, based on the idea that such a process helps to decrease injuries in the workplace. The Neal-Griffin Safety Climate/Safety Performance Instrument was used in a specific workplace to determine if race, gender, age, years of service, union membership, and education affect employees' perceptions of safety in an industrial/manufacturing setting. The results of this quantitative study found that, overall, the vast majority of the workers, regardless of demographic and group membership, provided relatively high survey ratings, which indicate that they had positive perceptions regarding their company's safety procedures and miscellaneous safety issues.
|
53 |
Audit bezpečnosti v průmyslovém podniku / Safety audit in a produstion enterpriseStrašiftáková, Júlia January 2013 (has links)
The aim of this diploma thesis is to provide information from field realization of safety audit in industrail company using Self - Audit Handbook for SMEs. In case of significant deficiencies, propose a precaution for improvements in system of control and managemnt of safety.
|
54 |
Assessment of Magnetic Resonance Imaging Safety: Allied Health Professional Clinical CompetenceHouser, Tiffany 01 May 2019 (has links)
Magnetic resonance imaging is a major advancement in the diagnostic imaging field. Most patients can tolerate an MRI however, there are some who are unable to complete a lengthy scan while lying completely still without sedatives or anesthesia. Non-MRI healthcare providers are trained to use equipment that is “unsafe” in the MRI suite due to the strong magnetic field. Staff who are not fully knowledgeable and trained in MRI safety measures can endanger staff and patients.
The purpose of this study was to determine the knowledge level of non-MRI healthcare providers regarding safety risks associated with MRI and to determine their level of satisfaction regarding the MRI safety training they received. This study concluded that non-MRI healthcare providers are knowledgeable about most of the safety hazards. They are satisfied with annual training but would like more in-depth material added to their current learning modules.
|
55 |
Nursing Perceptions of Patient Safety at Hamad Medical Corporation in the State of QatarAl-Ishaq, Moza A Latif 18 March 2009 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / The ability to improve the safety of patient care delivery is dependent on the safety culture, or the norms surrounding reactions following an error, the learning that takes place, and the proactive strategies in place to prevent future errors. While measurement of patient safety culture is now common in the United States (US) using instrument specifically developed for US healthcare organizations, no measurements of safety culture had been conducted at Hamad Medical Corporation in the State of Qatar, a Middle Eastern country; nor were valid or reliable instruments available. The purpose of this study was to assess registered nurses’ perceptions of the safety culture in the units where they provide nursing care at Hamad Medical Corporation using a modified version of the Agency for Healthcare Research and Quality (AHRQ) patient safety culture an instrument (Hospital Survey of Patient Safety Culture). Eight hundred surveys were distributed to all randomly-selected nurses from eight targeted clinical services with a response rate of 57%. Survey results were compared with those from US hospitals using the original AHRQ survey. Ranking of subscales for this study in terms of strengths and areas needing improvement were almost identical to the ordering of US hospital results, with teamwork within units ranked highest and indicating a strength; and the subscale non-punitive response to error the lowest and indicating an area for improvement. Positive response rates in terms of safety culture for this study were generally lower on
most subscales compared to the US results and may reflect the intensity of patient safety improvement activity in the US over the last eight years in response to the Institute of Medicine’s report on medical errors in 1999. Results from this study provide a baseline measurement for safety culture at Hamad Medical Corporation and beginning adaptation of an instrument that can be used in other Middle Eastern healthcare organizations in the future.
|
56 |
Developing a reliable and valid patient measure of safety in hospitals (PMOS): A validation studyMcEachan, Rosemary, Lawton, R., O'Hara, J.K., Armitage, Gerry R., Giles, S., Parveen, Sahdia, Watt, I.S., Wright, J., Yorkshire Quality and Safety Research Group 08 December 2013 (has links)
No / Introduction Patients represent an important
and as yet untapped source of information about
the factors that contribute to the safety of their
care. The aim of the current study is to test the
reliability and validity of the Patient Measure of
Safety (PMOS), a brief patient-completed
questionnaire that allows hospitals to proactively
identify areas of safety concern and vulnerability,
and to intervene before incidents occur.
Methods 297 patients from 11 hospital wards
completed the PMOS questionnaire during their
stay; 25 completed a second 1 week later. The
Agency for Healthcare Research and Quality
(AHRQ) safety culture survey was completed by
190 staff on 10 of these wards. Factor structure,
internal reliability, test-retest reliability, discriminant
validity and convergent validity were assessed.
Results Factor analyses revealed 8 key domains
of safety (eg, communication and team work,
access to resources, staff roles and responsibilities)
explaining 58% variance of the original
questionnaire. Cronbach’s α (range 0.66–0.89)
and test-retest reliability (r=0.75) were good.
The PMOS positive index significantly correlated
with staff reported ‘perceptions of patient safety’
(r=0.79) and ‘patient safety grade’ (r=−0.81)
outcomes from the AHRQ (demonstrating
convergent validity). A multivariate analysis of
variance (MAMOVA) revealed that three PMOS
factors and one retained single item discriminated
significantly across the 11 wards.
Discussion The PMOS is the first patient
questionnaire used to assess factors contributing
to safety in hospital settings from a patient
perspective. It has demonstrated acceptable
reliability and validity. Such information is useful
to help hospitals/units proactively improve the
safety of their care.
|
57 |
The explosive flammability of liquid grain fumigantsBulger, Carl Sigvold January 2011 (has links)
Digitized by Kansas State University Libraries
|
58 |
The critical success factors for the practical implementation of a safety culture improvement initiative in South AfricaShaik, Fatima 20 August 2012 (has links)
It is recognised that as with any other risk; health, safety and environment issues require an integrated management system to comprehensively and sustainably manage the risks in the workplace. However to move beyond the paper based systems, ultimately require a behavioural change that can only be achieved through a culture change that continually re-invents itself and that motivates staff (human beings) to intrinsically do the right thing every day, every time and without any overseer.
This study focuses on the critical success factors for the practical implementation of a safety culture improvement initiative in South Africa.
|
59 |
The thermal response of a pressurised storage vessel and its contents to simulated jet fire impingementLacy, Clive B. January 1997 (has links)
The storage of pressure liquefied gas in vessels is subject to various regulations and codes of practice. For example, Liquefied Petroleum Gas (LPG), a commercially relevant product, is subject to Health and Safety Executive Guidelines regarding cylinder/tank arrangements and spacing. In the event of an incident involving fire, the internal pressure and shell temperature of an LPG vessel will rise, and the weakening of steel at elevated temperatures can result in the structural failure of the shell. This can be avoided by the fitting of pressure relief valves, which vent material at a pre-set pressure. However, an ignited release can create a high velocity jet flame which, because of significant radiative and convective components, can generate intense, localised heat loads on neighbouring vessels or pipe-work. However, existing codes of practice have no special provision for the possibility of jet fire incidents. Owing to a lack of detailed information on the thermal response of a LPG vessel exposed to jet flame impingement, a series of laboratory scale tests with simulated, localised jet fire impingement on the exterior shell of a pressure vessel was required. The thermal response and the effects of key parameters, Le. fill level, magnitude of heated zone (Le. size and intensity) and position of simulated impingement, could then be examined for the part-validation of a suitable computer model. In addition, these studies could be used to interpret the results from concurrent full scale jet fire impingement trials. An appropriate pressure vessel was constructed to standard design codes, which incorporated a vent line and dump tank. A suitable LPG substitute was selected. Results from the studies indicated that mixing, and therefore thermal stratification, was highly dependent on the size of the heated zone and its position in relation to the liquid/vapour interface. High Speed Micro-Cinematography was successfully employed to film individual bubble streams within the vessel and to measure individual bubble sizes and velocities for various experimental configurations. Studies were also made on the venting characteristics. Sudden pressure relief caused severe agitation of the liquid phase and the breakdown of thermal stratification. In addition, swelling and aerosol generation through homogenous boiling within the liquid phase was observed. Comparisons with the nodal computer model revealed that the use of only single vapour and liquid nodes was a poor approximation to the detail observed in the small scale studies, where the incident heat flux was relatively low and the simulated region of impingement was highly localised. However, the bulk liquid and vapour temperatures and the pressure response up to the time of venting was generally well predicted. As the degree of engulfment increased the model became a better approximation. Although the full scale trials employed an almost fully engulfing jet flame rather than point source impingement, comparisons have allowed understanding of the liquid and vapour thermal gradients, and the subsequent breakdown of these during venting.
|
60 |
An assessment of the safety culture in a manufacturing plantVan der Merwe, Jacobus Johannes 04 1900 (has links)
Thesis (MBA)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Manufacturing plants should strive towards achieving and maintaining good safety records. It is however difficult for plants to identify specific safety problem areas that can be improved on. One way to identify specific safety areas that needs improvement is by conducting a safety culture survey.
A manufacturing plant within South Africa realised the need to improve on its safety performance. However, it was not clear which aspects of its work and safety related practices were at risk. Management therefore decided to obtain an assessment of the safety culture profile of the plant. The assessment was done by way of a plant-wide safety culture survey. The safety culture questionnaire was developed, as part of this research, through an in-house consultation process. This process resulted in identifying 16 different safety-related themes. With the help of literature, these themes were further explored to design the questionnaire. The identified safety themes were measured during the survey and results obtained for each of the plant’s identified safety practices.
The survey also provided an overall mean score of the plant’s safety culture, providing management with a better understanding of where they stand in their safety improvement journey. The plant’s equipment, materials and tools; overall rules and regulations; environment, health and safety suggestions; rewards and reinforcement; and management involvement practices was identified as practices that require an immediate response. The plant’s incident reporting and investigation, discipline and training safety practices were identified as less urgent risks.
|
Page generated in 0.0511 seconds