A flux declination predication model for nanoparticle-containing wastewaters treated by a simultaneous electrocoagulation/electro- filtration (EC/EF) process was investigated by perceiving blocked membrane pores, concentration polarization layer, cake layer, and applied electric field strength in this study. As nanotechnology develops, it has been used in many applications. However, its environmental impacts have not been extensively studied. Membrane technology is one of the direct and effective treatment methods for removing nanoparticles from wastewater. But nanoparticle-containing wastewater treated by membrane technology would face the problem of membrane fouling. In this study, oxide chemical mechanical polishing (CMP) wastewater, copper CMP wastewater, and nanosized TiO2-containing wastewater were treated by a EC/EF treatment module. In the EC/EF treatment module, iron, aluminum, and stainless steel were respectively selected as th anode and cathode. Polyvinylidene fluoride (PVDF) with a nominal pore size of 0.1 £gm and carbon/Al2O3 tubular inorganic composite membranes with a pore size ranging from 2 to 10 nm were used in this work. In this work, the changes of the relevant performance of membrane with changes of applied pressure (9.8-19.6 kPa), crossflow velocity (0.3-0.5 m/s) and applied electric filed strength (25-233 V/cm) were studied. The simulation results of a modified mathematic model showed that the flux declination would be fitted finely by an exponential function. Experimental results showed that a higher transmembrane pressure would yield a higher cake concentration and a higher crossflow velocity would yield the steady flux quickly. Overall speaking, the flux declination for nanoparticle-containing wastewaters treated by a simulataneous EC/EF process was described properly as a exponential form. The exponential function could simply show the flux declination of different samples treated by different modules in different situations.

This degree project was performed in collaboration with the division of nuclear physics at the department of physics, KTH Royal Institute of Technology. A partial goal of the project was to create a simulation model, where the relationship be- tween the multiplication of electrons that occurs in an ionization chamber and the different pressures of air in the detector could be visualized. The main goal was then to use this model in order to examine the behaviour of electron multiplication for different geometries of the simulated ionization chamber. The simulation was performed in Python 3.7 (Python Soft- ware Foundation, DE, United States), and geometry was modified by increasing and decreasing the simulated inner and anode wire radius of the chamber. Results showed that the peak of the multiplication curve occurred at different pressures for different geometries. When the anode wire radius was fixed, the peak occurred at a lower pressure for an increase of the inner radius, whereas, when the inner radius was fixed, the peak occurred at a higher pressure for an increase of the anode wire radius. The number of created electrons are dependent of Townsend’s coefficent, α, which in turn is dependent of the relationship between pressure and electric field strength. The electric field strength within an ionization chamber varies for different geometries, and therefore is the relationship between pressure and electric field that results in the max- imum value of α, and thus the maximum peak of the multiplication factor, consequently given by different pressures for different chamber geometries. If the results from the simulations in this project are to correspond with actual experimental data, the knowledge of this geometry-dependence may be used to include or exclude the multiplication peak in further measurements depending upon preference.

Le champ électrique d'une puissance suffisante peut provoquer une augmentation de conductivité et perméabilité de la membrane cellulaire. L'effet est connu comme l'électroporation, attribuée à la création de voies aqueuses dans la membrane. Quantifier le transport de la matière dans le cadre d'électroporation est un objectif important. Comprendre ces processus a des ramifications dans l’extraction du jus ou l’extraction sélective des composés de cellules végétales, l'amélioration de l'administration de médicaments, et des solutions aux défis environnementaux. Il y a un manque de modèles qui pourraient être utilisés pour modéliser le transport de la matière dans les structures complexes (tissus biologiques) par rapport à l'électroporation. Cette thèse présente une description mathématique théorique (un modèle) pour étudier le transport de la matière et le transfert de la chaleur dans tissu traité par l’électroporation. Le modèle a été développé en utilisant les lois de conservation et de transport et permet le couplage des effets de l'électroporation sur la membrane des cellules individuelles au transport de la matière ou la chaleur dans le tissu. Une solution analytique a été trouvée par une simplification, mais le modèle peut être étendu avec des dépendances fonctionnelles supplémentaires et résolu numériquement. La thèse comprend cinq articles sur l'électroporation dans l'industrie alimentaire, la création de modèle pour le problème de diffusion, la traduction du modèle au problème lié à l’expression de jus, validation du modèle, ainsi que des suggestions pour une élaboration future du modèle. Un chapitre supplémentaire est dédié au transfert de la chaleur dans tissu. / An electric field of sufficient strength can cause an increase of conductivity and permeability of cell membrane. Effect is known as electroporation and is attributed to creation of aqueous pathways in the membrane. Quantifying mass transport in connection with electroporation of biological tissues is an important goal. The ability to fully comprehend transport processes has ramifications in improved juice extraction and improved selective extraction of compounds from plant cells, improved drug delivery, and solutions to environmental challenges. While electroporation is intensively investigated, there is a lack of models that can be used to model mass transport in complex structures such as biological tissues with relation to electroporation. This thesis presents an attempt at constructing a theoretical mathematical description – a model, for studying mass (and heat) transfer in electroporated tissue. The model was developed employing conservation and transport laws and enables coupling effects of electroporation to the membrane of individual cells with the resulting mass transport or heat transfer in tissue. An analytical solution has been found though the model can be extended with additional dependencies to account for the phenomenon of electroporation, and solved numerically. Thesis comprises five peer-reviewed papers describing electroporation in the food industry, model creation for the problem of diffusion, translation of the model to the mathematically-related case of juice expression, model validation, as well as suggestions for possible future development, extension, and generalization. An additional chapter is dedicated to transfer of heat in tissue.

This master's thesis describes process of design and development of the system for calculating the coverage of wireless networks, it is implemented as a web portal and written in the Java programming language. The text of the thesis describes the work with the used platforms, a description of the ITU-R calculation method P.1812, which is used for calculation electric field strength and basic information about electromagnetic waves. The main function of the system is to calculate and display coverage of wireless networks and customer management information.