1 |
On the Electrostatics of Pneumatic Conveying of Granular MaterialsZhu, Kewu, Yao, Jun, Wang, Chi-Hwa 01 1900 (has links)
In this work the electrostatics of the pneumatic conveying of granular materials in a non-conducting (PVC) vertical pipe is studied using Electrical Capacitance Tomography (ECT) system. The non-conducting wall in general attains static charges arising from particle-wall collisions in the initial periods of conveying process and then reaches equilibrium with the surroundings. The polarity of particles and conveying pipe inner wall agrees reasonably well with the contact potential difference measurements. The perturbations in the capacitance signal due to charge accumulation are larger with smaller air superficial velocity. The denser flow regimes give larger wall residual charge. Wall charging process shows similar trend by surface potential and ECT measurements. The addition of small amount (0.5% by weight) of anti-static agent (Larostat-519) in the powder form decreases the electrostatic charge generation by altering the patterns for particle-particle and particle-wall collisions. / Singapore-MIT Alliance (SMA)
|
2 |
Progress in Adaptive Electrical Capacitance TomographyZEESHAN, ZEESHAN January 2017 (has links)
No description available.
|
3 |
Electrical Capacitance Volume Tomography Of High Contrast Dielectrics Using A Cuboid GeometryNurge, Mark 01 January 2007 (has links)
An Electrical Capacitance Volume Tomography system has been created for use with a new image reconstruction algorithm capable of imaging high contrast dielectric distributions. The electrode geometry consists of two 4 x 4 parallel planes of copper conductors connected through custom built switch electronics to a commercially available capacitance to digital converter. Typical electrical capacitance tomography (ECT) systems rely solely on mutual capacitance readings to reconstruct images of dielectric distributions. This dissertation presents a method of reconstructing images of high contrast dielectric materials using only the self capacitance measurements. By constraining the unknown dielectric material to one of two values, the inverse problem is no longer ill-determined. Resolution becomes limited only by the accuracy and resolution of the measurement circuitry. Images were reconstructed using this method with both synthetic and real data acquired using an aluminum structure inserted at different positions within the sensing region. Comparisons with standard two dimensional ECT systems highlight the capabilities and limitations of the electronics and reconstruction algorithm.
|
4 |
Validation of Electrical Capacitance Volume Tomography with Applications to Multi-Phase Flow SystemsMarashdeh, Qussai 09 September 2009 (has links)
No description available.
|
5 |
Nitrogen Efficiency of Winter Oilseed Rape and its Prediction by Hyperspectral Canopy Reflectance and Electrical CapacitanceRudloff, Julia Anna Erika Ruth 23 July 2015 (has links)
No description available.
|
6 |
Permittivity and conductivity imaging in electrical capacitance tomographyZhang, Maomao January 2016 (has links)
Electrical capacitance tomography (ECT) is a technology that images the dielectric permittivity distribution of materials under test. ECT has been used as a tool for process monitoring in particular for two-phase flow measurement. These applications mainly focus on the dielectric samples, whose conductivity is negligibly small. This thesis studies ECT imaging with conductivity considerations. The conductive materials will affect the capacitance measurements and introduce difficulties in the ECT image reconstruction. This thesis presents solutions based on ECT to image material of different values of conductivity in different practical process or monitoring scenarios: the conductivity within materials under test is considered to be higher than 10^6 S/m, or less than 10 S/m. This work consists of the following innovative steps. (i) Through an ECT monitoring, floating (i.e., electrically non-grounded) metallic samples are imaged as dielectric illusions and the analysis of capacitance measurements over the conductors is delivered. (ii) Magnetic induction tomography (MIT) is firstly used for locating grounded metallic samples, thereafter as an assistant method to guide ECT to image the dielectric components. (iii) In low conductivity case MIT, as an indicator of conductive material again, helps ECT to solve multiphase flow problems. (iv) The multi-frequency complex ECT measurement provides a potential method to improve the ECT imaging ability for both conductive and dielectric materials. The first three ideas have been testified by both simulated and experimental results, while the fourth part is simulation-based results only on current stage.
|
7 |
Electrical capacitance tomography for real-time monitoring of process pipelinesAl Hosani, Esra January 2016 (has links)
The process industry is concerned with the processing of crude resources into other products. Such crudes consist of multiphase components that introduce major challenges to the operators; hence the need for efficient instrumentations that address such challenges is highly desirable. One major need is an early deposit detection system that detects deposit before it builds-up in a pipeline or equipment to prevent any possible hazard. Another critical requirement is the need to continuously monitor the flow and deduce the flow rate of every individual phase in order to study and analyse the produced product. Hence, in order to ensure safety, increase profits, optimize production and ensure production quality, the multiphase flow must be adequately monitored and controlled. This thesis demonstrated the efficiency of novel ECT algorithms for early deposit detection and multiphase flow measurement in order to measure the flow rate of all separate phases. This thesis focuses on developments in ECT image reconstruction specifically the inverse solutions and is divided into three main studies where they all build up to complete each other. In the first study, ECT is used for the first time with a narrowband pass filter to focus on targeted locations in a pipe where dielectric contaminants are expected to deposit in order to enhance the resolution of the produced images. The experimental results showed that different deposit regimes and accumulated fine deposits could be detected with high resolution. The second study allowed a better understanding of how conductive material could be imaged using a conventional ECT device and how state of the art algorithms such as iterative total variation regularisation method and the level set method could enhance this application. Also, absolute ECT imaging is presented for the first time where the level set algorithm uses only one set of ECT measurement data. This study gives a novel solution for detecting conductive deposits as well as paves the way to use the new level set algorithm for multiphase flow measurement. In the third study, the novel narrowband level set algorithm was modified to image multiphase media in order to correctly determine the number, location and concentration of the present phases. The innovative absolute ECT imaging using level set method is tested with high contrast and low contrast multiphase data, which adds more to the challenge.
|
8 |
Soot mass estimation from electrical capacitance tomography imaging for a diesel particulate filterHassan, Salah E. 05 1900 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / The Electrical capacitance tomography (ECT) method has recently been adapted
to obtain tomographic images of the cross section of a diesel particulate filter (DPF).
However, a soot mass estimation algorithm is still needed to translate the ECT image
pixel data to obtain soot load in the DPF. In this research, we propose an estimation
method to quantify the soot load in a DPF through an inverse algorithm that uses the
ECT images commonly generated by a back-projection algorithm. The grayscale pixel
data generated from ECT is used in a matrix equation to estimate the permittivity
distribution of the cross section of the DPF. Since these permittivity data has direct
correlation with the soot mass present inside the DPF, a permittivity to soot mass
distribution relationship is established first. A numerical estimation algorithm is then
developed to compute the soot mass accounting for the mass distribution across the
cross-section of the DPF as well as the dimension of the DPF along the exhaust
flow direction. Firstly, ANSYS Electronic Desktop software is used to compute the
capacitance matrix for different amounts of soot filled in the DPF, furthermore it also
analyzed different soot distribution types applied to the DPF. The Analysis helped
in constructing the sensitivity matrix which was used in the numerical estimation
algorithm. Experimental data have been further used to verify the proposed soot
estimation algorithm which compares the estimated values with the actual measured
soot mass to validate the performance of the proposed algorithm.
|
9 |
Toward Imaging of Multiphase Flows using Electrical Capacitance TomographyRasel, Rafiul Karim 02 October 2019 (has links)
No description available.
|
10 |
Sliding Mode Control and Electrical Capacitance Volume Tomography for Advanced Control of the Chemical Looping ProcessPark, Cody 08 October 2018 (has links)
No description available.
|
Page generated in 0.1054 seconds