Voltammetric methods for the determination of diazepam (DZ) and nordiazepam (NDZ) were developed. Techniques differential pulse voltammetry (DPV) and DC voltammetry were used for determination of DZ and NDZ at meniscus modified silver solid amalgam electrode (m-AgSAE). The effect of pHa on the intensity of signal was observed in the mixture of Britton-Robinson buffer and methanol (9:1), and in the mixture of 0.1 mol.l−1 NaOH and methanol (9:1). The stability of the signal during repeated measurements in the mixture of 0.1 mol.l−1 NaOH and methanol (9:1), and in the mixture of BR buffer and methanol (9:1) was monitored. Optimal pHa 13.2 of medium of 0.1 mol.l−1 NaOH and methanol (9:1) was used for determination of DZ with DPV and DCV techniques. Optimal pHa 10.1 of medium of BR buffer and methanol (9:1) was used for determination of NDZ with DPV and DCV techniques. Under these conditions linear dependencies calibration were measured. Concentration range of DZ was measured with DCV in range of 10x10−5 - 6x10−6 mol.l−1 and with DPV technique in range of 10x10−5 - 2x10−6 mol.l−1 . Concentration range of NDZ was measured with DCV technique in range of 10x10−5 - 4x10−6 mol.l−1 and with DPV technique in range of 10x10−5 - 2x10−6 mol.l−1 . The limit of detection for DZ was calculated 6.6x10−6 mol.l−1 with DCV and...

The thesis deals with a study of the various carbon materials for negative electrode of lithium ion accumulators. The object of the work is to gain the most knowledge about these materials and to project their possible improvements. In the first part of the work is described the latest knowledge about carbon materials and their application. In the following parts of the work is handled about manufacture,optimization of composition of electrode and the choice of carbon material for liquid and gel electrolyte.

The first aim of this work was to develop copper modified carbon felt electrode for detection of amino acids, which are not electrochemically active on ordinary carbon electrodes. Phenylalanine solution at a concentration 1.0 mmol dm-3 was chosen as the testing solution. Electrode modified with electrochemical deposition of copper from mixture of copper(II) sulphate and sodium sulphate provided very low responses which were decreasing during first measurements, apparently because of insufficient amount of copper. Therefore, further experiments were performed using copper microparticles as a modifier. Copper microparticles activated in nitric acid at a concentration 80 mmol dm-3 were applied at carbon felt by several techniques and in different parts of the felt, i.e. by stirring the felt in microparticles suspension, by dripping of the suspension to the part of the felt in contact with capillary (proximal), between two parts of the carbon felt (sandwich) and at a part of the carbon felt in contact with electrolyte in a measuring cell (distal). Electrodes modified in the distal and in the sandwich arrangement were chosen as the best ones. In the last part, calibration dependences for phenylalanine in concentration range from 0.025 mmol dm-3 to 1.0 mmol dm-3 were measured on the last two electrodes....

This thesis deals with the study of growth of zinc oxide crystals from supersaturated solutions using a scanning electron microscope and XRD methods. The work is divided into a theoretical and an experimental part. The theoretical part analyses issues related to the principle of operation of electrochemical cells with an emphasis on Ni-Zn batteries and phenomena limiting the life and efficiency of Ni-Zn batteries with a focus on phenomena that affect precipitation processes of zinc oxide crystals. It also analyses and compares the appropriateness of the methods that have been used to study the growth of the prepared zinc oxide crystals. The experimental part describes the preparation of a supersaturated solution, the process of each analysis and its evaluation. The results of each method are compared with the theoretical assumptions and among themselves. The experimental part also contains a chapter dealing with the design of in situ X-ray diffraction analysis methods of the obtained zinc oxide crystals.

This master's thesis is focused on in situ observation of the negative electrode of the lead acid accumulator using atomic force microscopy AFM. Discussed topics are lead acid accumulator, atomic force microscopy, cyclic voltammetry and current knowledge of the in situ observation of the lead acid accumulator using AFM. The main task of this project is assembling the experimental cells, make in situ observation of the negative electrode surface of the lead acid accumulator. In the end evaluate if this method is suitable for the lead acid battery observation.

The thesis briefly discusses the issue of electrochemical power sources, especially with a focus on lead-acid batteries operating in modes that are typical of hybrid electric vehicles. The theoretical part of the thesis should be a good basis for the subsequent practical part, in which several experimental electrodes and their parameters will be performed and evaluated. The output of the practical part will be conclusions regarding the influence of different variants of modified carbon used as an additive in the active material of the negative electrode on the capacity and life of cells

The diploma thesis deals with the issue of electrochemical cells and deals in detail with lithium-ion batteries. The thesis describes the history of development of lithium-ion batteries, basic information about lithium and basic types of electrochemical cells. The work is devoted in detail to the description of characteristics and operating principle of lithium-ion batteries with emphasis on the negative electrode and negative electrode materials. Of the negative electrode materials, both the most widely used material graphite and modern materials with a great potential for the future are described. In the measurement methods the work describes methods CV, GCPL and EIS. Great emphasis is placed on the explanation of the principle of the function of electrochemical impedance spectroscopy and its application in measurement of electrochemical properties of materials used in lithium-ion batteries. There is also described the procedure of calculation of diffusion coefficients using the results of electrochemical impedance spectroscopy. In the practical part, two methods are used to calculate the diffusion coefficients of lithium ions into the negative electrode made of expanded flake graphite using the results of a series of electrochemical measurements.

This diploma thesis deals with the issue of lithium-ion accumulators. The thesis focuses on the negative electrode of lithium-ion accumulators made of natural graphite. The first part of this thesis points to the issue of electrochemical cells. In the theoretical part the thesis deals with the SEI layer, advantages, disadvantages, characteristics, operating principle and the use of lithium-ion accumulators. The practical part focuses on the electrochemical properties of negative electrode, especially the determination of the diffusion coefficient. Thesis also deals with electrochemical impedance spectroscopy (EIS) and its use in determining the equivalent replacement circuit and calculating the diffusion coefficient.

This thesis focuses on the study of graphene application in electronics and technology of preparation. In addition to the basic properties of graphene, the theoretical part of the work also describes the methods of its preparation, transmission, characterization and possibilities of application in electronics. The experimental part is divided into three chapters. The first chapter deals with the production of graphene by deposition from the gaseous phase, its transmission and application in the field of solar cells. The Poly(methyl methacrylate) polymer was first used for transfer of graphene, which was later replaced by Rosin due to less contamination of graphene at the end of the transmission process. The second chapter deals with the preparation of quantum dots by exfoliation in the liquid phase from graphite and its application in voltammetry. Voltammetry was utilized in this work to detect hydrogen peroxide using a gold electrode modified by quantum dots from graphene and other dichalcogens (MoS2, MoSe2, WS2, WSe2). In the last chapter, the influence of the substrate and the deposition conditions of graphene is studied by means of a plasma-reinforced phase-out of gas to growth, while the prepared graphene was characterized by imaging and spectroscopic methods. The entire experimental growth of graphene was managed and evaluated using a planned experiment.

The Master´s thesis deals with description of the influence of cobalt additive on positive electrode parameters for Ni-Cd accumulators. Trough the use of Electrochemical Quartz Crystal Microbalance are analysed the effects which decline effective life of positive electrode during accelerated cycling. Theoretical part describes important characteristics of Ni-Cd accumulators, the working principle and effects which are in progress on positive electrode during cycling. The next part deals with description of system EQCM and the pricnciples of doping active mass with cobalt additive. Practical part consists of EQCM system calibration and electrochemical measurements. The principal aim is detection of the influence of cobalt additve on active mass during cycling in different electrolytes. From the results of measurements is set the optimal amount of cobalt additive.