1 |
Evaluation of particle release during cleaning of coated surfaces with pulsed Nd:YAG laserKahl, Torsten, Lohse, Franz, Herrmann, Marion, Hurtado, Antonio 07 June 2024 (has links)
The released particles during laser-based surface ablation of an epoxy resin coating were investigated for their number, size, mass and chemical composition. The laser used was a pulsed Nd:YAG laser with a maximum average power of 91 W. During the experiments, the applied laser power was investigated as a varying parameter. With the highest power, a maximum particle count of 4.3*108 particles/cm³ was measured, which corresponds to a mass of approximately 55 mg/m³. With decreasing laser power, the particle loading of the aerosol decreases. The particle sizes are bimodal distributed between 10 nm and approximately 3 μm. The first peak is at 34 nm and the second peak is at 630 nm. In terms of number, the nanoparticles dominate the distribution. During the analysis of the particles, fractal and spherical particles were determined, whereby the fractal particles are mainly in the nanometre range and the spherical particles mostly in the μm range. The chemical analysis of the particles showed that they consist of carbon and hydrogen.
|
2 |
Book of Abstracts - 7th PhD Conference: From research to success - possible paths in scienceWeiß, Alexander 31 July 2024 (has links)
These are the abstracts of the presentations of the 7th PhD conference held on 9 June 2023 in Freiberg.
|
Page generated in 0.0652 seconds