Graduation theses deals with problems of nuclear energetics and its impact on the environment. It presents the progress of nuclear power station in all contexts and tries to demostrate that the nuclear energetics is unavoidable progression. The work further describes the influence of Nuclear power station Dukovany on its close environment, especially on animals, plants and the health of inhabitants.

This diploma thesis deals with the issues of Business Process Management (BPM) in companies engaged in the energy distribution and trading in the Czech Republic (with a focus on the electricity and natural gas market). The first part introduces the basic terms and specifies the theoretical principles of Business Process Management in comparison with the classical functional management approach including the benefits, risks and issues associated with the implementation of Business Process Management in the organization. Thesis also outlines the issues and current status in the market with tools for BPM support. Next part of the thesis is devoted to analysis of the energy market in Czech Republic including its specifics and providing a sample of companies into the research which is the subject of the last part of the thesis. The goal of the realized research is to describe the current status of Business Process Management in the selected companies including formulation of conclusions and evaluation of the current level of usage of BPM.

The aim of the thesis is to explain both the practical and theoretical aspects of the current trends in the development of sustainable communities. On the one hand, saving electricity and heat energy standards implementations - passive house, energy+, etc.; on the other hand, the possibilities of local communities supplying renewable electricity and heat in order to reach the highest share of renewable energy. In the practical part I will focus on the implementation of saving measures and the installation of renewable energy sources to a specific community. I will draw from the current architectural trends and the latest technologies for renewable energy sources.

abstract: The hydrous alteration of ultramafic rocks, known as serpentinization, produces some of the most reduced (H2 >1 mmolal) and alkaline (pH >11) fluids on Earth. Serpentinization can proceed even at the low-temperature conditions (<50°C) characteristic of most of Earth’s continental aquifers, raising questions on the limits of life deep in the subsurface and the magnitude in the flux of reduced volatiles to the surface. In this work, I explored the compositions and consequences of fluids and volatiles found in three low-temperature serpentinizing environments: (1) active hyperalkaline springs in ophiolites, (2) modern shallow and deep peridotite aquifers, and (3) komatiitic aquifers during the Archean. Around 140 fluids were sampled from the Oman ophiolite and analyzed for their compositions. Fluid compositions can be accounted for by thermodynamic simulations of reactions accompanying incipient to advanced stages of serpentinization, as well as by simulations of mass transport processes such as fluid mixing and mineral leaching. Thermodynamic calculations were also used to predict compositions of end-member fluids representative of the shallow and deep peridotite aquifers that were ultimately used to quantify energy available to various subsurface chemolithotrophs. Calculations showed that sufficient energy and power supply can be available to support deep-seated methanogens. An additional and a more diverse energy supply can be available when surfacing deep-seated fluids mix with shallow groundwater in discharge zones of the subsurface fluid pathway. Finally, the consequence of the evolving continental composition during the Archean for the global supply of H2 generated through komatiite serpentinization was quantified. Results show that the flux of serpentinization-generated H2 could have been a significant sink for O2 during most of the Archean. This O2 sink diminished greatly towards the end of the Archean as komatiites became less common and helped set the stage for the Great Oxidation Event. Overall, this study provides a framework for exploring the origins of fluid and volatile compositions, including their redox state, that can result from various low-temperature serpentinizing environments in the present and past Earth and in other rocky bodies in the solar system. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2020

89 Public law regulation of renewable energy sources usage in the Czech Republic Abstract This thesis is devoted to the public regulation of renewable sources usage in the Czech Republic. It is however strongly emphasizing the European component of the regulation and it gives some focus to a comparison of Czech regulation with foreign regulation, specifically German. Its objective is to define concepts that are necessary to analyze legal regulation, analyze the evolution of the public law regulation in the area of renewable energy sources, describe current situation and provide some prospect for future, as well as offer suggestions on improvement of the regulation. The thesis therefore in its first part provides definitions of basic concepts, such as renewable energy sources and particular types thereof, production and source of electrical energy. In a following part the thesis using historical legislation as well as other sources follows the evolution of the regulation in question on the Czech territory and focuses on a successful program Zelená úsporám in a greater detail. Chronologically comes the thesis to a current state of regulation of renewable energy sources usage, mainly from a viewpoint of a public support thereof. Hence it concerns mainly about the law No. 165/2012 Sb. on supported energy...

The energy exchanged between the atmosphere and the ocean is an important parameter in understanding the Earth’s climate. One way of quantifying this energy exchange is through the use of “wind work,” or the work done on the ocean by the wind. Since wind work is calculated according to the interaction between ocean surface currents and surface wind stress, a number of surface current decompositions can be used to decompose wind work calculations. In this research, geostrophic, ageostrophic, Ekman, and total current decompositions are all used to calculate wind work. Geostrophic currents are formed by the balance of surface pressure gradients and the Coriolis effect. Ageostrophic currents, on the other hand, are difficult to calculate because they are made up of many types of currents, and are generally defined as any current not in geostrophic balance. The main component of ageostrophic currents, Ekman currents, are used in this work to approximate ageostrophic currents. Ekman currents are formed by the balance of surface wind stress and the Coriolis effect. Finally, total currents are the sum of all currents in the ocean. Using high resolution, global NASA ocean models, the wind work on the global oceans is estimated via a number of decompositions, with results finding about 3.2 TW, .32 TW, and 3.05 TW for total, geostrophic, and Ekman wind work respectively, when taking a 7 day window average of surface currents and a 1 day average of surface stress. Averaging period for currents is found to significantly affect the resulting calculated wind work, with greater than 50 percent difference between 1 and 15 days of averaging. Looking at the same total, geostrophic, and Ekman wind work results for 1 day averages of wind stress and surface currents finds 5.5 TW, .03 TW, and 6.3 TW respectively. This result indicates that high frequency currents are very important to wind work. Seasonally, wind work is found to be at a maximum during the Northern Hemisphere (NH) summer, and at a minimum during the NH winter months. To help motivate the funding of a Doppler Scatterometer, simulations are used to show the capabilities of such an instrument in measuring wind work. DopplerScat simulations find that a satellite capable of measuring coincident surface vector winds and surface vector currents, with 1.1 m/s wind speed error and .5 m/s current speed error, could estimate global wind work to within 2 percent accuracy on an 8 day average with daily global snapshots.

The thesis is focused on the conception of a new strategy plan company, ČEZ Logistics, which is a member of ČEZ Group. The New strategy goals and ways to get them, are based on the analysis of the actual state of the company. The main objective is to increase the company's goodwill and its competitiveness.

The aim of this work was to develop a proposal regarding hydro-energy potential of small flows of water through the city „Hovězí near Vsetín“. The available water energy was used for running a Swirl Turbine featuring a siphon arrangement. This new concept makes use of a modified Kaplan Turbine, operating at small water heads. It operates also at higher revolutions and has higher discharge.

This master's thesis informs its reader about actual energetical situation of Poland and its probable future. The thesis focus on shale gas resesources in the world and Poland and methods of its mining and procesing. Main problematics of determining, designing and technology of TEG dehydration unit were described in this thesis.

The initiation of high explosives (HEs) under shock loading lacks a comprehensive understanding: particularly at the particle scale. One common explanation is hot spot theory, which suggests that energy in the material resulting from the impact event is localized in a small area causing an increase in temperature that can lead to ignition. This study focuses on the response of HMX particles (a common HE) within a polymer matrix (Sylgard-184^®), a simplified example of a polymer bonded explosive (PBX). A light gas gun was used to load the samples at impact velocities ranging from 370 to 520 m/s. The impact events were visualized using X-ray phase contrast imaging (PCI) allowing real-time observation of the impact event. The experiments used three subsets of PBX samples: multiple particle (production grade and single crystal), drilled hole, and milled slot. Evidence of damage and deformation occurred in all of the sample types. While the necessary impact velocity for consistent hot spot formation leading to reactions was not reached, the damage (particularly cracking) that occurred provides a useful indication of where hot spots may occur when higher velocities are reached. With the multiple particle samples, evidence of cracking and debonding occurred throughout. One sample showed significant volume expansion due to possible reaction. The samples containing drilled holes demonstrated the expected pore collapse behavior at these velocities, as well as damage downstream from the holes under various two-hole arrangements. Milled slot samples were tested to simulate existing cracks in the HMX. These samples showed increased damage at the site of the milled slot, as well as unique cracking behavior in one of the samples.