Guadua angustifolia Kunth (Guadua) is a bamboo species native to South and Central America that has been widely used for structural applications in small and large-scale buildings, bridges and temporary structures. Currently, its structural use is regulated within seismic resistant building codes in countries such as Peru and Colombia. Nevertheless, Guadua remains a material for vernacular construction associated with high levels of manual labour and structural unpredictability. Guadua buildings are limited to two storeys due to the overall flexibility of the slender and hollow culms and its connection systems. Its axial specific stiffness is comparable to that of steel and hardwoods, but unlike wood, Guadua’s hollow structure and lack of ray cells render it prone to buckling along the grain and to transverse crushing. As a result, Guadua’s mainstream use in construction and transformation into standard sizes or engineered Guadua products is scarce. Therefore, this work focussed on the development of standardised flat industrial structural products from Guadua devising replicable manufacturing technologies and engineering methods to measure and predict their mechanical behaviour. Cross-laminated Guadua panels were developed using thermohydro-mechanically modified and laminated flat Guadua strips glued with a high performance resin. Guadua was subjected to thermo-hydro-mechanical (THM) treatments that modified its microstructure and mechanical properties. THM treatment was applied to Guadua with the aim of tackling the difficulties in the fabrication of standardised construction materials and to gain a uniform fibre content profile that facilitated prediction of mechanical properties for structural design. Densified homogenous flat Guadua strips (FGS) were obtained. Elastic properties of FGS were determined in tension, compression and shear using small-clear specimens. These properties were used to predict the structural behaviour of G-XLam panels comprised of three and five layers (G-XLam3 and G-XLam5) by numerical methods. The panels were assumed as multi-layered systems composed of contiguous lamellas with orthotropic axes orientated at 0º and 90º. A finite element (FE) model was developed, and successfully simulated the response of G-XLam3 & 5 panels virtually loaded with the same boundary conditions as the following experimental tests on full-scale panels. G-XLam3 and G-XLam5 were manufactured and their mechanical properties evaluated by testing large specimens in compression, shear and bending. Results from numerical, FE predictions and mechanical testing demonstrated comparable results. Finally, design and manufacturing aspects of the G-XLam panels were discussed and examples of their architectural and structural use in construction applications such as mid-rise buildings, grid shells and vaults are presented. Overall, this research studies THM treatments applied to Guadua in order to produce standardised engineered Guadua products (EGP), and provides guidelines for manufacturing, testing, and for the structural analysis and design with G-XLam panels. These factors are of key importance for the use of Guadua as a mainstream material in construction.

Engineered wood products (EWP) are becoming extremely popular and a viable material option for the construction of residential, commercial, and hybrid buildings. Cross-laminated timber (CLT) is among one of the many EWP available in North America, which can be utilized for many different applications such as: walls, floors, and roofs. Despite the available requirements in the Canadian blast design standard (CSA, 2012) with regard to the design of wood structures, there are currently no provisions on how to retrofit timber structures to improve their performance when subjected to blast loads. The current study is aimed at investigating the effect of different retrofitting alternatives in order to improve the overall behaviour of CLT when exposed to out-of-plane bending. The experimental program examined the behaviour of seventeen reinforced CLT slabs. Testing was conducted at the University of Ottawa by means of a shock tube capable of simulating high strain rates similar to those experienced during a blast event. The current study was divided into two phases. The first consisted of CLT slabs retrofitted with steel straps where strap spacing, location, and order of installation was investigated. The second phase focused on the development of dynamic properties of CLT panels when reinforced with GFRP. Lay-up configuration and fabric orientation were among the parameters explored. The results from the experimental program show that reinforcing the panels with steel straps had minimal effect on the ultimate strength, but significant levels of post peak resistance and ductility was achieved. The horizontal straps were able to restrict the failure to small regions and to promote flexural failure by preventing rolling shear failure. It also eliminated flying debris and enhanced the ultimate strength, stiffness as well as ductility. Applying GFRP layers enhanced the overall behaviour of the slab resulting in a significant increase in peak resistance, ductility, and stiffness when compared to the dynamic results of an unretrofitted panel. The post peak resistance was also greatly improved. In particular, applying stacked quadraxial lay-up configuration significantly improved the ductility and resulted in the greatest post peak resistance. The effect of steel straps on damaged and retrofitted was relatively minimal, and only partial recovery of the resistance and the stiffness was achieved. GFRP with full confinement yielded better performance compared to the unretrofitted and undamaged counterpart. More work is needed to quantify the benefits of using GFRP in these applications.

The advancement in manufacturing technologies to produce high-performing engineered wood products (EWP) has allowed wood to be utilized beyond the traditional low-rise light-frame structures and to become a viable material option for much larger structures. Although glued-laminated timber (glulam) is included as a material option in the current blast code (CSA, 2012), its response to blast loading is not yet well documented. An experimental program investigating the behaviour of seventy glulam beams and columns was developed with focus on establishing the dynamic characteristics of glulam beams and columns with and without the effect of FRP reinforcement. A shock tube capable of simulating high strain rates similar to those experienced during blast was used. Thirty-eight beams with three different cross-sections were tested statically and dynamically to establish the high strain rate effects (dynamic increase factor). Six columns were also tested dynamically with axial load levels ranging from 15 to 75 % of the columns’ compression design capacity. Different retrofit configurations varying from simple tension reinforcement to U-shaped tension reinforcement with confinement using both unidirectional and bi-directional FRP were investigated on a total of twenty-six beams. A procedure capturing the strain-rate effects, variable axial load and FRP, was developed and found to be capable of predicting the flexural behaviour of the beams up to maximum resistance with reasonable accuracy when compared to experimentally obtained static and dynamic resistance curves. Implications on the design of both retrofitted and unretrofitted specimens are also discussed.

The purpose of this research was to quantify properties of strandboard panels manufactured with various preservatives at loading levels effective against native termites. Panels were manufactured using nine different formulations. The method of preservative addition was also examined for some preservative formulations, increasing the total number of preservative treatments to twelve. Panels were manufactured with one target retention for each preservative treatment. An effective preservative loading relative to termites was established by previous studies or referencing current standards. Mechanical testing performed included static bending and internal bond. Physical testing included water absorption, thickness swell, and linear expansion. Few treatments met the Canadian standards for strandboard, but several preservatives performed well. Copper naphthenate, bifenthrin, and copper betaine each deserve further investigation to optimize manufacturing variables to meet required mechanical and physical properties.

For structural engineers, the two most important design criteria are utility andsafety. It is about making sure that a structural component is reliable enough not toendanger any of a building's users, while at the same time being as sustainable andefficiently designed as possible. In other words, an element must be safe enough towithstand the improbability and sufficiently cheap to be relevant for the design.Considering this, using a material such as wood instead of metal may prove to be asustainable alternative for certain building components.Timber can be designed to sustain high temperatures and fire; it has a high strengthrelative to its weight and is naturally produced. Furthermore, an engineered woodproduct such as birch plywood has proven very strong in structural applications,especially when glued. Therefore, birch plywood has great potential as a reliablematerial in structural components. In this work, a total of 24 specimens with birchplywood connections were tested experimentally.The specimens were designed to enforce stress states that would occur in actualtrusses. Additionally, Specimens were assembled with two different connectionmethods, one being a dowel-type connection and the other being a glued-type. Eachtype of connection was tested in both tension and compression, with a total of threerepetitions each. For the glued-type specimens, birch plywood plates wereinvestigated in three different angles to the face grain; 0°, 5° and 15°. Theload-displacement relationships and the failure modes are of specific interest in thisthesis.Test results showed that failure modes were semi-brittle and distinct, and the testsshowed that glued-type connections withstood 37% higher loads than dowelledtypes. Specimens might withstand even higher loads if gluing were performed in amore controlled environment. The load-to-face-grain angle of plywood also had asignificant impact on the capacity of connections. For the 0°-specimens with gluedconnections tested in compression, no failures occurred in the plywood, and testsreached loads as high as 82 kN. Calculations were made estimating the load capacityas high as 95 kN, but possibly a more realistic approximation would be 85 kN. Thiswould imply that the 0°-specimens are around 20% stronger than the 15°-specimensand approximately 17,7% stronger than the 5°-specimens tested in compression.Birch plywood is promising to be used in connections of timber structures whereplates transfer forces between structural elements.