Project of health center with facilities for civic amenities. It is a three-storey above ground object. On the ground floor there is a pharmacy, a veterinary station and a medical office. On the second floor there are six medical offices and a technical room. On the third floor there are 4 spaces for civic amenities. Vertical load-bearing structure consists of masonry of ceramic blocks and internal monolithic reinforced concrete skeleton. Horizontal load-bearing structure is made of reinforced concrete beams and prestressed reinforced concrete panels. The building is based on concrete foundation strips and reinforced concrete pads. The building is roofed with a warm flat green roof. Thermal insulation of the facade is made of mineral wool insulation and has a ventilated facade.

The aim of the diploma thesis is processing of the design documentation to execution newly-built multifunctional building in the city part Brno - Řečkovice. Multifunctional building is a detached house, which is located in a quiet area on the edge city. This is a five floor building with four floor, one basement and flat roof. Building is rectangular shape. At the object are twelve parking spaces for cars. Vertical load-bearing structure are made of masonry and reinforced frame system, reinforced concrete floor and prestressed hollow core slab Spiroll. External facade building is created by render scrape texture and flush facade in ground floor.

The aim of this Diploma thesis is the elaboration of the project documentation of a construction part for realization of the new building of the production hall and administrative building in a city of Slavkov u Brna. According to the local zoning plan, both buildings are designed on a plot in the development part of the city. The selected plot is conveniently located due to good accessibility to the D1 motorway. The office building will consist of two above-ground floors. On the first floor there will be the management of the company and the head of the press, the economic and commercial department, hygienic facilities. On the second floor there wil be a graphic studio, a day room and a spacious terrace. The construction system of an office building will be a wall longitudinal. The ground plan of the object is rectangular. the roof is designed as a mono-pitched roof. The factory is a single-storey building. Inside the factory hall there will be a polygraphical technological equipment. The location of the machines is only indicative as well as their choice. The hall will have its own equipment equipped with air conditioning and heating. It is designed as a precast concrete frame. The system is designed longitudinal. The object is a rectangular ground plan with a saddle roof.

This diploma thesis is a project of a two-storey building of a Kindergarten. The building will be used for educating preschool children. On the ground floor, there are two base classrooms, one in each wing of the building. Each classroom has several zones (relaxing, playing, creating). Each classroom also has its own dressing room, washroom + toilets. On the ground floor, we can also find facilities for teachers and the principal office. Since finished food will be delivered, the building only contains a food preparation facility + dry storage. The second floor is accessible either by stairs or by elevator. On the second floor, there is another base classroom with its own dressing room and a washroom with toilet. Food is transported from the first floor by elevator, which is not designed for transporting people. On the second floor, there is also the teacher´s base + large social hall for occasional events. The kindergarten building has an atypical layout. The building is partly roofed by a flat roof and partly by a gabled roof. The project was processed using the computer program AutoCAD. During processing, emphasis was placed on the correct layout, architectural design and safe use of the building.

The project involves the design and solution of a restaurant with dance floor and accommodation. This includes a new building on land plot 389/1, 389/3, 389/4, 1632/2, 1632/3, 1634/9, located in the town of Čáslav. Access to the building and layout inside the building is barrier-free. The restaurant is designed for a capacity of 120 people to sit. The total bed capacity of the pension is 14 beds. One double room is designed for barrier free use of the accommodation unit. The structural system of the object is masonry, with additional elements of the cast-in-place concrete frame. At the site of the largest span are designed reinforced concrete columns and dimensioned 0.3 x 0.3 m with a maximum centre to centre spacing of 5.31 x 5.775 m. Basement masonry is supposed to be from permanent shuttering. The masonry part of the building at the groundfloors is made from ceramic blocks of type POROTHERM with 300 mm thickness. Internal loadbearing masonry and not loadbearing masonry walls are built from ceramic blocks of POROTHERM with thickness 250, 150, 80 mm, or plasterboard partition with thickness 155 mm. The building is insulated with a contact insulation system. The (exterior) building envelope is designed with a ventilated air gap. The floor structure is supposed to be from reinforced concrete monolithic slab. The building is roofed with a flat roof with a single-layer flat roof with a classical layout. Above the restaurant will be an extensive green roof.

The subject of the diploma thesis is the elaboration of the project documentation of an administrative building in the south-eastern part of Brno. The building has seven above-ground floors, of which five above-ground floors will be used as office space, one above-ground floor will be used for commercial use and gastronomy. On the last floor, there will be an elevator lift range and a technical background for air conditioning. The support system is designed as a reinforced concrete skeleton based on a reinforced concrete slab and pilots. The façade is designed as lightly ventilated with facing bricks. For this object, a single-shell roof area is selected.

The theme of my diploma thesis is reconstruction of old exhibition hall “B” of BVV Trade Fairs Brno which is located at Křižkovského street near BVV gate no. 4. The exhibition hall is converted to multifunctional sports hall. This function is result of complex urban analysis, which was theme of winter semester thesis of the academic year 2017/2018. The exhibition hall gets a new curtain wall facade. Curtain wall sustains of steel construction and semi-transparent polycarbonate panels. The study converts rooms according to new usage of the hall. There are smaller halls for indoor sports, dividable central hall, tribunes, bars, locker rooms, roof wellness and outdoor multifunctional playgrounds at the roof of the hall. The study takes advantage of uncommon technical solutions of the hall. For example bridge crane which is newly used as carrying construction for LED multimedia cube.

The Subject of this diploma thesis is design documentation of Relax sports facility with accommodation in Suchdol and Odrou. Mixed-use building is three-storeyed with partial basement. Roofing is flat single-skinned roof over the entire building. From the material point of view, the basement is made from lost formwork, all aboveground floors are bricked from ceramic blocks. The facade is designed as ventilated. Ceilings will be made from cast-in-place reinforced slabs and the sports ground will be covered with glued lamellar beams. The basement part of the building is relaxing - there are various types of saunas, cooler, whirlpool and massage room. On the first floor there is a restaurant with backgrounds and kitchen, a café, and sports activities in the form of badminton, squash and gym. Two more floors are used mainly to accommodate guests in the hotel. All operations are functionally connected by the reception hall.

The theme of my diploma thesis is the design and production of the project documentation of art gallery in Brno in Veveří street. The new building of the cultural center corresponds to the city plan of the the city Brno. The object is composed of three above-ground floors with partial basement. The new building has cafe, great hall, workshop for kids and exhibition area of art gallery. The construction system is combinated, it is formed from ceramic walling and columns. The ceilings are cast-in-place reinforced concrete floors. There is counter roof. Load carrying systém of roof are nailed timber trussgirders . The facade is designed as ventilated. The object is situated in a gently sloping plot.

The subject of my diploma thesis is sports centre. There are 3 establishments. Main establishment is shooting range. Others are gun store and café. Floor 1S is almost completely under terrain and is designed with cast-in-place concrete. Ceiling above floor 1S is designed with cast-in-place concrete slab. Floor 1NP is designed with aerated concrete blocks with ventilated facade. Ceiling above 1NP is designed with prestressed concrete floor slabs. Roof was designed as flat roof with growing layer. The drawings were processed in a computer program ArchiCad.