The diploma thesis deals with project of a new building of winery production. Winery has one floor and a basement. We can split the winery into three parts. First part – production. This whole part is dedicaded to the production of wine. It consists of spaces where grapes are degraded, fermented, pressed, stored, bottled, labeled and subsequently exported. Production has a volume of 300 000 l of wine. Second part is for administration. There are two offices and a confrence room. Third part is for public using and it is composed of the tasting room with view at the wineyard and of the retail hall. The structural system is prefabricated skeleton of reinforced concrete. The roof is constructed as a flat green roof.

The subject of the diploma thesis is the new building of the alliative care center in Žamberk. It is a detached building, which is partly basement and has three above-ground floors. From the operating point of view, it is a medical-social facility. The facility has a range of palliative care services - a dormitory, a day hospice, a mobile hospice facility and outpatient services. Due to the type of facilities and persons using the facilities, emphasis was placed on the location of an object situated on the outskirts of the city in the area of other social and health facilities designed for long-term residence in a quiet, quiet environment with plenty of surrounding greenery. The mass of the building consists of several blocks, the shape and material solution is simple. The construction system is a monolithic reinforced concrete skeleton, coated with ceramic blocks. Several types of flat roofs are covered, 2NP is designed as a receding floor with a barrier-free terrace.

The subject of this thesis is the development of project documentation for the construction design of the mixed-use building in Třebíč, in the borough of Na Kopcích. The building has four above-ground floors. On the first floor there are shops, specifically a hairdresser and a café, and the technical background of the house. The second to fourth floors are made up of residential units and a storeroom is built to each apartment on the floor. There are 4 flats 2 + kk, 4 flats 3 + kk and 3 flats 4 + kk. The roof structure is designed as a warm flat green roof. Construction system is wall, masonry from clay blocks.

The final thesis speaks about design of kindergarten for detailed design. Building is located in Humpolec on the parcel no. 2130/18. Building has three floors and flat roof. In the building is located four classes for kindergarten, logopedics and classroom for english language. Architectonic design is made by using ventilated facade and stone veneer.

The aim of my diploma thesis is the elaboration of the project documentation for the construction of the administrative building. It is a seven-storey building with one underground and six above-ground floors. The underground floor is halfway under the terrain and used for garage parking. The loose part will be used for barrier-free entrance to the building and partly as a cafe. Above-ground floors are used as office spaces. The administrative building is designed as a monolithic reinforced concrete structure in the underground floor, the above-ground floors are designed as a column monolithic system for flexible use of office space. The static calculation will be carried out according to valid ČSN EN standards.

The subject of these Master Thesis is a new building of Cars Museum. The object is located in Telc on street Radkovska, district Jihlava. This locality was chosen for its favorable conditions. In this area, there are lots of enthusiast and supporters of motorism. The nearest commission of veterans is around 50 km far. This museum is also meaning to improve a network of a commission of veterans. Telc is a beautiful historic city, which is an ideal choice for a museum of veterans. The building is divided into 3 imaginary sectors. The first one is an administrative part, which has two above-ground floors. In the first floor, there is educative room to familiarize guests with the history of vehicles, entry hall with reception, hygienic facilities for guests and base for staff and operations of the museum. In the second floor, there are offices for the museum, the commission of veterans, meeting room, storeroom, gaming-room, and daily room. The second part is the exhibition area. The third part is workshops and a base to remove operating fluids from cars. The investor is a passionate collector of historic vehicles and wants to share his collection with the public.

The subject of the diploma thesis is new stand-alone hotel with a catering service and a relaxation zone including a fitness room, a table tennis room, massages and a solarium. The individual functional parts are separated and can be operated independently of each other. The Building consists of three floors. The ground floor will serve to run a restaurant with a background and a for relaxation zone, the remaining two floors will be used to accommodate guests and the necessary facilities. The maximum capacity for the accommodation is 59 people and requires four employees to operate it. The restaurant is designed for 81 guests and a total of 7 employees. The relaxation part is for guests only and is not accessible to other people. The structure is based on strip foundations from plain concrete and reinforced concrete foundation footing. Peripheral vertical load-bearing structures of the first above-ground floor are designed from permanent formwork system, all others loadbearing walls will be walled-up from vertically perforated block laid on thin-film adhesive. The floor structures are designed as an assembly of prestressed hollow core slabs. Roofing of the building will be made as a flat vegetation roof.

The diploma thesis is focused on an architectonic study of cycling stadium in Brno Komárov that shall substitute the current velodrome at Brno´s fair ground that does not conform to current Olympic standards and that shall provide new and better conditions not only for the club Favorit Brno base but also for other enthusiastic sportsmen of track cycling. The study regards also the future adding of another sport, of athletics as Brno has not enough of covered training areas. That is why I add the cycling with this sport in my diploma thesis so that the building can offer its maximum not only to top sportsmen but also occasional sport enthusiasts and to enrich its surroundings to its maximum. The building design uses combination of concrete, steel and glass. Large glass façade is shielded with a great roof overlap that shall provide a natural shielding in summer period. The diploma thesis was preceded with a specialised atelier TG02 that was focused on the development of adjacent surfaces, on the BMX track that should closely cooperate with the new cycling stadium. The specified territory in Komárov Brno presents a great sport potential that shall be developed in the future.

The presented dissertation thesis is focused on investigating the adhesive properties of façade cladding made of wood and wood-based materials in combination with flexible adhesion/assembly systems. The systems allow the implementation of effective construction joints and provide a solution with uniform stress distribution which allows the transfer of heavy loads, while simultaneously reducing the weight of the entire structure, which is also often connected with substantial cost reductions. Despite all that, little attention has been paid to this area so far. It is not a solution which is properly embodied in technical standards or in designers´, architects´ and contractors´ awarenesses. The aim of this dissertation is to characterise adhesive properties of selected façade cladding representatives made of wood and wood-based materials for the purposes of bonded joint application in a ventilated façade system. To define adhesion of façade joints, numerical and experimental methods are used, taking also various limit conditions into account. The main conclusion of the dissertation is the characterisation of basic parameters which influence adhesion, effectiveness and quality of façade glued joints. The secondary conclusion is the compilation of a simple methodical procedure for testing and implementing façade glued joints. The dissertation also makes a contribution by extending the current state of knowledge of façade adhesive joints.

The subject of my diploma thesis is a project of a new mixed-use building in Košetice. This building connects more functions. It is going to be partly office, partly educational center with accommodation and one part will be used as a flat for building keeper. The building is L-shaped. Parking will be realized in front of the building near an access road. Behind the main part of the house, there is designed outdoor theater. The building has two aboveground floors. The enterence part is single-storey with vegetation roof. There is designed a saddle roof - wooden truss. The vertical peripheral structures are provided with an insulation system from mineral wool with ventilated space, the load-bearing structure is made of clay. The horizontal bearing structures are designed as monolithic reinforced concrete slabs. The project is created in a simple way to harmonize with the surrounding countryside.