Adoption of no-till (NT) and reduced tillage management is widespread on the Canadian prairies and together form the basic platform of soil management upon which most crop production is based. Elimination of tillage in cropping systems changes the physical and chemical characteristics of the soil profile and can affect crop growth and ultimately yield. As such, understanding how soil biota, as drivers of nutrient turnover, adapt to NT is important for maximizing crop productivity and mitigating environmental damage in agroecosystems. This work aims to achieve a greater understanding of microbial community structure and function in long-term NT versus conventionally tilled (CT) soils. Community phospholipid and DNA fingerprinting did not reveal any consistent tillage-induced shifts in microbial community structure, but demonstrated a clear influence of depth within the soil profile. While tillage did not result in broad changes in the community structure, total, bacterial and fungal biomass was consistently greater near the surface of NT soils. Further examination at one site near Swift Current, SK revealed differences in microbial biomass and community structure in NT and CT in field-formed aggregate size fractions. Measurement of mineralization and nitrification at the same site indicated that differences in the early-season turnover of N may be related to physical rather than microbial differences in NT and CT soils. Potential nitrification was higher prior to seeding than mid-season, was not affected by tillage and was correlated with ammonia oxidizer population size of archaea, but not bacteria. This work indicates that edaphic soil properties and spatial distribution of resources in the soil profile, rather than tillage management, are the primary factors driving microbial community structure in these soils.

Adoption of no-till (NT) and reduced tillage management is widespread on the Canadian prairies and together form the basic platform of soil management upon which most crop production is based. Elimination of tillage in cropping systems changes the physical and chemical characteristics of the soil profile and can affect crop growth and ultimately yield. As such, understanding how soil biota, as drivers of nutrient turnover, adapt to NT is important for maximizing crop productivity and mitigating environmental damage in agroecosystems. This work aims to achieve a greater understanding of microbial community structure and function in long-term NT versus conventionally tilled (CT) soils. Community phospholipid and DNA fingerprinting did not reveal any consistent tillage-induced shifts in microbial community structure, but demonstrated a clear influence of depth within the soil profile. While tillage did not result in broad changes in the community structure, total, bacterial and fungal biomass was consistently greater near the surface of NT soils. Further examination at one site near Swift Current, SK revealed differences in microbial biomass and community structure in NT and CT in field-formed aggregate size fractions. Measurement of mineralization and nitrification at the same site indicated that differences in the early-season turnover of N may be related to physical rather than microbial differences in NT and CT soils. Potential nitrification was higher prior to seeding than mid-season, was not affected by tillage and was correlated with ammonia oxidizer population size of archaea, but not bacteria. This work indicates that edaphic soil properties and spatial distribution of resources in the soil profile, rather than tillage management, are the primary factors driving microbial community structure in these soils.

Feeding experiments were conducted on Atlantic pollock (Pollachius virens) to examine the variability in tissue fatty acid (FA) composition and stable carbon isotope fractionation of FA during digestion, assimilation and mobilization of lipids. The FA profiles and compound-specific carbon isotopes of chylomicrons, liver, muscle and fasted serum were compared to diet. FA analysis demonstrated similarity among tissue groups despite differences in feeding states. The FA results indicate the blood of post-prandial fish may serve as an alternative to tissue biopsies for the estimation of marine fish diets with compound-specific isotope analysis (CSIA). Despite similarity among FA profiles, the carbon isotope discrimination factors of FA varied independently, which suggests that fractionation is influenced by the degree to which individual FA are oxidized. These results provide preliminary information that is necessary in order to use CSIA to estimate the effects of fish diets.

Despite emerging water shortages, most water is only used once, and often with low efficiency. However, with appropriate treatment, water can be re–used to reduce the demand on freshwater sources. The Department of Water Affairs, South Africa, promotes industries to reduce discharges into water resources in order to sustain an overall good water quality of all water systems. All of this ultimately leads to industries striving towards zero effluent discharge. Primary Column Bottoms (PCBs) is a wastewater stream derived from the Fischer–Tropsch Gas to Liquid process and consists mainly of organic acids, but no nitrogen or phosphorous, which by implication excludes possible biodegradation. In the operation of cooling towers in industrial processes, cooling water quality has a direct impact on the cooling performance of the system, where nutrient levels may affect fouling, scaling and corrosion observed in the cooling towers. Fouling, scaling and corrosion affect the operating efficiency of cooling water systems and may necessitate the addition of chemical agents to control these phenomena. This has a financial and labour time impact on the operation of these systems. In this study a mini cooling tower test rig was operated with a synthetic PCB effluent as cooling water and various cycles of concentration, pH and linear flow velocities (LFVs). A constant delta temperature of 10 °C was maintained. Cycles of concentration (COC) evaluated included 2, 4 and 6 cycles of concentration and linear flow velocities evaluated was 0.6 m/s, 0.9 m/s and 1.2 m/s. Fouling, scaling and corrosion rates were determined using corrosion coupons and heat exchanger tubes for mild steel and stainless steel. Besides the evaluation of the various operational parameters for fouling, scaling and corrosion, the possibility for chemical oxygen demand (COD) removal by operating the cooling tower as a bioreactor was also evaluated. To this end nutrient correction was applied to the reactor to allow for a CNP ratio of 100:10:1. With regard to fouling, scaling and corrosion, mild steel was more affected by fouling, scaling and corrosion compared to stainless steel where almost no fouling, scaling and corrosion was observed. Overall increased linear flow velocities resulted in higher fouling and scaling rates, whereas lower linear flow velocities resulted in decreased corrosion rates. In terms of cycles of concentration, increased COC resulted in higher fouling, scaling and corrosion rates. Despite the high nutrient removal levels, the accompanying fouling, scaling and corrosion was still below the particular industry’s guidelines. Besides physical–chemical evaluation of the towers under the various operational conditions, culture–dependent and culture–independent methods were also employed. Concerning culture–dependent approaches the study demonstrated that aerobic and anaerobic organisms are present in both the planktonic and sessile phase of the cooling tower reactors. Heterotrophic aerobes were found to be the most abundant under all the operating conditions. Sulphate reducing bacteria were more abundant in the sessile phase of the cooling towers, and the presence of high sulphate levels in the experiments could be indicative of the sulphate reducing bacteria actively participating in the microbial community. Lower than expected corrosion levels, however, suggest that a combination of the organisms in the biofilm rather than sulphate reducing bacteria alone, contributed to the corrosion rates observed. Culture–independent methods, specifically phospholipid fatty acid analysis supported the results from the culture–dependent methods. Furthermore results demonstrated that linear flow velocity had a greater effect on the community structure than cycles of concentration. Finally molecular methods, specifically denaturing gradient gel electrophoresis, found that increasing cycles of concentration resulted in increased microbial community diversity, while increasing linear flow velocity resulted in decreased microbial community diversity. Regarding COD removal, nutrient correction of the synthetic PCB effluent achieved 89.35 % COD removal at 2 COC and 1.2 m/s LFV, while 80.85 % COD removal was achieved at 4 COC at 1.2 m/s LFV. From these results it was recommended that the operation of the cooling tower should be at 4 COC and 1.2 m/s, which despite slightly lower % COD removal, were characterised by fouling, scaling and corrosion rates well within guidelines. / Thesis (M. Environmental Science)--North-West University, Potchefstroom Campus, 2012.

Despite emerging water shortages, most water is only used once, and often with low efficiency. However, with appropriate treatment, water can be re–used to reduce the demand on freshwater sources. The Department of Water Affairs, South Africa, promotes industries to reduce discharges into water resources in order to sustain an overall good water quality of all water systems. All of this ultimately leads to industries striving towards zero effluent discharge. Primary Column Bottoms (PCBs) is a wastewater stream derived from the Fischer–Tropsch Gas to Liquid process and consists mainly of organic acids, but no nitrogen or phosphorous, which by implication excludes possible biodegradation. In the operation of cooling towers in industrial processes, cooling water quality has a direct impact on the cooling performance of the system, where nutrient levels may affect fouling, scaling and corrosion observed in the cooling towers. Fouling, scaling and corrosion affect the operating efficiency of cooling water systems and may necessitate the addition of chemical agents to control these phenomena. This has a financial and labour time impact on the operation of these systems. In this study a mini cooling tower test rig was operated with a synthetic PCB effluent as cooling water and various cycles of concentration, pH and linear flow velocities (LFVs). A constant delta temperature of 10 °C was maintained. Cycles of concentration (COC) evaluated included 2, 4 and 6 cycles of concentration and linear flow velocities evaluated was 0.6 m/s, 0.9 m/s and 1.2 m/s. Fouling, scaling and corrosion rates were determined using corrosion coupons and heat exchanger tubes for mild steel and stainless steel. Besides the evaluation of the various operational parameters for fouling, scaling and corrosion, the possibility for chemical oxygen demand (COD) removal by operating the cooling tower as a bioreactor was also evaluated. To this end nutrient correction was applied to the reactor to allow for a CNP ratio of 100:10:1. With regard to fouling, scaling and corrosion, mild steel was more affected by fouling, scaling and corrosion compared to stainless steel where almost no fouling, scaling and corrosion was observed. Overall increased linear flow velocities resulted in higher fouling and scaling rates, whereas lower linear flow velocities resulted in decreased corrosion rates. In terms of cycles of concentration, increased COC resulted in higher fouling, scaling and corrosion rates. Despite the high nutrient removal levels, the accompanying fouling, scaling and corrosion was still below the particular industry’s guidelines. Besides physical–chemical evaluation of the towers under the various operational conditions, culture–dependent and culture–independent methods were also employed. Concerning culture–dependent approaches the study demonstrated that aerobic and anaerobic organisms are present in both the planktonic and sessile phase of the cooling tower reactors. Heterotrophic aerobes were found to be the most abundant under all the operating conditions. Sulphate reducing bacteria were more abundant in the sessile phase of the cooling towers, and the presence of high sulphate levels in the experiments could be indicative of the sulphate reducing bacteria actively participating in the microbial community. Lower than expected corrosion levels, however, suggest that a combination of the organisms in the biofilm rather than sulphate reducing bacteria alone, contributed to the corrosion rates observed. Culture–independent methods, specifically phospholipid fatty acid analysis supported the results from the culture–dependent methods. Furthermore results demonstrated that linear flow velocity had a greater effect on the community structure than cycles of concentration. Finally molecular methods, specifically denaturing gradient gel electrophoresis, found that increasing cycles of concentration resulted in increased microbial community diversity, while increasing linear flow velocity resulted in decreased microbial community diversity. Regarding COD removal, nutrient correction of the synthetic PCB effluent achieved 89.35 % COD removal at 2 COC and 1.2 m/s LFV, while 80.85 % COD removal was achieved at 4 COC at 1.2 m/s LFV. From these results it was recommended that the operation of the cooling tower should be at 4 COC and 1.2 m/s, which despite slightly lower % COD removal, were characterised by fouling, scaling and corrosion rates well within guidelines. / Thesis (M. Environmental Science)--North-West University, Potchefstroom Campus, 2012.

Recent work has demonstrated that vast amounts of soil organic carbon (SOC) are redistributed and buried within Canadian croplands; however, the effects of redistribution on SOC dynamics and biological properties of the soil environment remain unknown. Because soil microorganisms are drivers of carbon (C) turnover in soil, the effects of such processes on microbial community dynamics are important in assessing the overall effects of redistribution and the stability of displaced C. This is particularly important in the face of future climate change scenarios and potential disturbances. The objectives of this study were to examine microbial community dynamics with depth and among landscape positions in an eroded landscape, and to assess C mineralization response between surface and subsurface soil layers in a depositional position. Microbial abundance was highly influenced by SOC redistribution. This was most evident in the buried backslope position where substantial soil and SOC deposition had occurred, creating a very thick A horizon (ca. 80 cm). Phospholipid fatty acid (PLFA) analysis revealed substantial concentrations of microbial biomass located at depth (30-60 cm), which was greater than PLFA concentration at the soil surface and correlated with SOC concentration. Community structure analysis demonstrated the strong influence of landscape position and depth in structuring microbial communities near the soil surface (0-20 cm). Communities in positions that were predominantly erosional were the most different from those in the depositional position, accounting for the largest amount of variation (60%) in the overall analysis. The existence of distinct microbial communities found in depositional material (0-25 cm) and within the buried A horizon (30-80 cm) in the buried backslope position indicate a strong influence of depth and redistribution in structuring microbial communities. The existence of significant viable biomass in the buried A horizon of the depositional position leads to question the persistence of highly concentrated, buried SOC over many decades. When soils from surface (0-5 and 20-25 cm) and subsurface (40-45 and 65-70 cm) depths were incubated in surface-like conditions, greater mineralization response in surface relative to subsurface soils, despite relatively similar SOC concentration, suggests that redistribution protects buried C from decomposition. Distinct microbial communities found at the onset and completion of the mineralization study between surface and subsurface soil layers may indicate the influence of microbial community structure on mineralization response. Depth was the largest source of variation in microbial community structure, and although a shift occurred after exposure to incubation conditions, the effect of depth remained the strongest influence. This work indicates that SOC redistribution strongly influences microbial abundance and community structure development, primarily driven by altered substrate gradients occurring with depth, and suggests that C is less susceptible to decomposition once buried in depositional positions.

Climate change is likely to alter plant species composition and interactions between plants and soil microbes that together dictate the quantity and quality of forage produced in pastures, the base of animal production in central Kentucky. This study assessed the seasonal dynamics of soil microbes and their response to increased temperature (+3oC) and growing season precipitation (+30% of the mean annual). Total soil microbial biomass, community composition, enzyme activities, potential carbon mineralization, and catabolic responses to selected substrates were measured seasonally in the different climate treatments. In this system, seasonal variability was a dominant driving factor for all the soil microbial characteristics that I investigated. Summer maxima and winter minima were identified in the active microbial biomass, while soil microbial community structure differed between each season. Extracellular enzyme activities were generally highest in either the spring or summer, while seasonal patterns for each substrate were unique across catabolic response profiles. Climate treatments produced few significant main or interactive effects on the soil microbial biomass and function. This resiliency, coupled with evidence of functional redundancy, suggests that central Kentucky pasture ecosystems may be well-equipped to handle future environmental stress associated with climate change and to maintain critical ecosystem services.

No description available.

No description available.

No description available.