Concrete deep beams with small shear span-to-depth (a/d) ratios are common elements in structures. However, there are few experimental results on the behaviour of FRP reinforced concrete deep beams and no specific modelling techniques exist in design codes for such members. The objectives of this study were to examine the shear behaviour of FRP reinforced concrete deep beams containing no web reinforcement and to develop a modelling technique. Test results of 12 large-scale specimens are reported where the primary variables included the a/d ratio, reinforcement ratio, member height, and concrete strength. The results showed that an arch mechanism was able to form in FRP reinforced concrete beams having a/d 2.1. A strut and tie modelling procedure adapted from CSA A23.3-04 was capable of accurately predicting the capacity of FRP reinforced concrete deep beams containing no web reinforcement while sectional shear models gave poor, but conservative, predictions. / Structural Engineering

The introduction of fibre-reinforced polymers (FRPs) to the field of civil engineering has led to numerous research efforts focusing on a wide range of applications where properties such as high strength, light weight or corrosion resistance are desirable. In particular, FRP materials have been especially attractive for use as internal reinforcement in reinforced concrete (RC) structures exposed to aggressive environments due to the rapidly deteriorating infrastructure resulting from corrosion of conventional steel reinforcement. While FRPs have been successfully implemented in a variety of structural applications, little research has been conducted on the use of FRP reinforcement for short span slab bridges. Furthermore, the behaviour of FRP-RC flexural members cast with self-consolidating concrete (SCC) is largely absent from the literature. The present study investigates the behaviour of an all-FRP reinforcement system for slab bridges which combines lower cost glass FRP (GFRP) reinforcing bars with high performance carbon FRP (CFRP) prestressed tendons in SCC to produce a structure which is both cost-efficient and characterized by excellent structural performance at the serviceability, ultimate and fatigue limit states. An extensive experimental program comprised of 57 large or full-scale slab strips was conducted to investigate the effects of reinforcement type, reinforcement ratio, prestressing level and shear reinforcement type on the flexural performance of slab bridges under both monotonic and fatigue loading. The proposed reinforcement system was found to display excellent serviceability characteristics and high load capacities as well as significant deformability to allow for sufficient warning prior to failure. Lastly, the use of post-tensioned CFRP tendons limited the stresses in the GFRP reinforcing bars leading to significantly longer fatigue lives and higher fatigue strengths compared to non-prestressed slabs. Analytical models were used to predict the behaviour of the slab bridge strips at service and at ultimate. Where these models failed to accurately represent the experimental findings, simple modifications were proposed. The results from ancillary tests were also used to modify existing analytical models to predict the effects of fatigue loading on the deflection, crack width, shear resistance and flexural capacity of each of the tested slabs.

With the rise in hazards that structures are potentially subjected to these days, ranging from pre-contemplated terror attacks to accidental and natural disasters, safeguarding structures against such hazards has increasingly become a common design requirement. The extreme loading conditions associated with these hazards renders the concept of imposing generalized codes and standards guidelines for structural design unfeasible. Therefore, a general shift towards performance-based design is starting to dominate the structural design field. This study introduces a powerful structural analysis tool for reinforced concrete structures, possessing a high level of reliability in handling a wide range of typical and extreme loading conditions in a sophisticated structural framework. VecTor3, a finite element computer program previously developed at the University of Toronto for nonlinear analysis of three-dimensional reinforced concrete structures employing the well-established Modified Compression Field Theory (MCFT), has been further developed to serve as the desired tool. VecTor3 is extended to include analysis capabilities for extreme loading conditions, advanced reinforced concrete mechanisms, and new material types. For extreme loading conditions, an advanced coupled heat and moisture transfer algorithm is implemented in VecTor3 for the analysis of reinforced concrete structures subjected to fire. This algorithm not only calculates the transient temperature through the depth of concrete members, but also calculates the elevated pore pressure in concrete, which enables the prediction of the occurrence of localized thermally-induced spalling. Dynamic loading conditions are also extended to include seismic loading, in addition to blast and impact loading. Advancing the mechanisms considered, VecTor3 is developed to include the Disturbed Stress Field Model (DSFM), dowel action and buckling of steel reinforcement bars, geometric nonlinearity effects, strain rate effects for dynamic loading conditions, and the deterioration of mechanical properties at elevated temperatures for fire loading conditions. Finally, the newly-developed Simplified Diverse Embedment Model (SDEM) is implemented in VecTor3 to add analysis capability for steel fibre-reinforced concrete (SFRC). Various analyses covering a wide range of different structural members and loading conditions are carried out using VecTor3, showing good agreement with experimental results available in the literature. These analyses verify the reliability of the models, mechanisms, and algorithms incorporated in VecTor3.

With the rise in hazards that structures are potentially subjected to these days, ranging from pre-contemplated terror attacks to accidental and natural disasters, safeguarding structures against such hazards has increasingly become a common design requirement. The extreme loading conditions associated with these hazards renders the concept of imposing generalized codes and standards guidelines for structural design unfeasible. Therefore, a general shift towards performance-based design is starting to dominate the structural design field. This study introduces a powerful structural analysis tool for reinforced concrete structures, possessing a high level of reliability in handling a wide range of typical and extreme loading conditions in a sophisticated structural framework. VecTor3, a finite element computer program previously developed at the University of Toronto for nonlinear analysis of three-dimensional reinforced concrete structures employing the well-established Modified Compression Field Theory (MCFT), has been further developed to serve as the desired tool. VecTor3 is extended to include analysis capabilities for extreme loading conditions, advanced reinforced concrete mechanisms, and new material types. For extreme loading conditions, an advanced coupled heat and moisture transfer algorithm is implemented in VecTor3 for the analysis of reinforced concrete structures subjected to fire. This algorithm not only calculates the transient temperature through the depth of concrete members, but also calculates the elevated pore pressure in concrete, which enables the prediction of the occurrence of localized thermally-induced spalling. Dynamic loading conditions are also extended to include seismic loading, in addition to blast and impact loading. Advancing the mechanisms considered, VecTor3 is developed to include the Disturbed Stress Field Model (DSFM), dowel action and buckling of steel reinforcement bars, geometric nonlinearity effects, strain rate effects for dynamic loading conditions, and the deterioration of mechanical properties at elevated temperatures for fire loading conditions. Finally, the newly-developed Simplified Diverse Embedment Model (SDEM) is implemented in VecTor3 to add analysis capability for steel fibre-reinforced concrete (SFRC). Various analyses covering a wide range of different structural members and loading conditions are carried out using VecTor3, showing good agreement with experimental results available in the literature. These analyses verify the reliability of the models, mechanisms, and algorithms incorporated in VecTor3.

Ageing infrastructure that is shear deficient and may be at risk of brittle collapse, particularly in seismically active regions, can be economically strengthened using externally bonded fibre-reinforced polymers (FRP). Although many studies have been conducted on small-scale specimens subject to monotonic loading, little experimental data exists for large-scale specimens and those tested under reversed cyclic loading to simulate a seismic event. An experimental study of large-scale (400 mm x 650 mm) beam specimens strengthened in shear with FRP was conducted to examine the effects of reversed cyclic loading and to quantify material shear strength contributions. Testing showed that FRP retrofits were highly effective at improving shear performance and were not adversely affected by reversed cyclic loading prior to the occurrence of flexural yielding. The shear resistance attributed to concrete was found to remain relatively consistent with reversed cyclic loading prior to flexural yielding, after which point concrete strength decay was apparent. The loss of concrete shear resistance directly influenced the rate of FRP straining and the achievable ductility. An analytical model using the Modified Compression Field Theory (MCFT) was developed for externally bonded FRP reinforcement to describe the experimental behaviour and to evaluate the accuracy of current FRP design methods. Failures were accurately modelled when appropriate FRP strain limits were used for the ultimate strength and for the stress transfer capacity across the shear crack. Proposed FRP strain limits were developed considering the strain distribution along the crack plane. In addition, improved strain limits incorporate the effect of rupture failure due to stress concentrations in the FRP wrapped around the beam corners. The proposed FRP formulations offer improved accuracy over the current FRP design methods (CSA S6-06 and ACI 440.2R-08), which suggest a broadly applied maximum strain limit of 0.004 mm/mm, which was determined to be overly conservative for FRP rupture failures.

Ageing infrastructure that is shear deficient and may be at risk of brittle collapse, particularly in seismically active regions, can be economically strengthened using externally bonded fibre-reinforced polymers (FRP). Although many studies have been conducted on small-scale specimens subject to monotonic loading, little experimental data exists for large-scale specimens and those tested under reversed cyclic loading to simulate a seismic event. An experimental study of large-scale (400 mm x 650 mm) beam specimens strengthened in shear with FRP was conducted to examine the effects of reversed cyclic loading and to quantify material shear strength contributions. Testing showed that FRP retrofits were highly effective at improving shear performance and were not adversely affected by reversed cyclic loading prior to the occurrence of flexural yielding. The shear resistance attributed to concrete was found to remain relatively consistent with reversed cyclic loading prior to flexural yielding, after which point concrete strength decay was apparent. The loss of concrete shear resistance directly influenced the rate of FRP straining and the achievable ductility. An analytical model using the Modified Compression Field Theory (MCFT) was developed for externally bonded FRP reinforcement to describe the experimental behaviour and to evaluate the accuracy of current FRP design methods. Failures were accurately modelled when appropriate FRP strain limits were used for the ultimate strength and for the stress transfer capacity across the shear crack. Proposed FRP strain limits were developed considering the strain distribution along the crack plane. In addition, improved strain limits incorporate the effect of rupture failure due to stress concentrations in the FRP wrapped around the beam corners. The proposed FRP formulations offer improved accuracy over the current FRP design methods (CSA S6-06 and ACI 440.2R-08), which suggest a broadly applied maximum strain limit of 0.004 mm/mm, which was determined to be overly conservative for FRP rupture failures.

The introduction of fibre-reinforced polymers (FRPs) to the field of civil engineering has led to numerous research efforts focusing on a wide range of applications where properties such as high strength, light weight or corrosion resistance are desirable. In particular, FRP materials have been especially attractive for use as internal reinforcement in reinforced concrete (RC) structures exposed to aggressive environments due to the rapidly deteriorating infrastructure resulting from corrosion of conventional steel reinforcement. While FRPs have been successfully implemented in a variety of structural applications, little research has been conducted on the use of FRP reinforcement for short span slab bridges. Furthermore, the behaviour of FRP-RC flexural members cast with self-consolidating concrete (SCC) is largely absent from the literature. The present study investigates the behaviour of an all-FRP reinforcement system for slab bridges which combines lower cost glass FRP (GFRP) reinforcing bars with high performance carbon FRP (CFRP) prestressed tendons in SCC to produce a structure which is both cost-efficient and characterized by excellent structural performance at the serviceability, ultimate and fatigue limit states. An extensive experimental program comprised of 57 large or full-scale slab strips was conducted to investigate the effects of reinforcement type, reinforcement ratio, prestressing level and shear reinforcement type on the flexural performance of slab bridges under both monotonic and fatigue loading. The proposed reinforcement system was found to display excellent serviceability characteristics and high load capacities as well as significant deformability to allow for sufficient warning prior to failure. Lastly, the use of post-tensioned CFRP tendons limited the stresses in the GFRP reinforcing bars leading to significantly longer fatigue lives and higher fatigue strengths compared to non-prestressed slabs. Analytical models were used to predict the behaviour of the slab bridge strips at service and at ultimate. Where these models failed to accurately represent the experimental findings, simple modifications were proposed. The results from ancillary tests were also used to modify existing analytical models to predict the effects of fatigue loading on the deflection, crack width, shear resistance and flexural capacity of each of the tested slabs.

No description available.

No description available.

In this thesis, new design concepts for arch bridges using ultra high-performance fibre-reinforced concrete are developed for spans of 50 to 400 m. These concepts are light-weight and efficient, and thus have the potential to significantly reduce the cost of construction. Lightness is achieved by the thinning of structural components and the efficient use of precompression in the arch, rather than by the decrease of bending stiffness. Using the advanced properties of the material, the design concepts were shown to reduce the consumption of concrete in arch bridges by more than 50% relative to arches built using conventional concrete technology. In addition to span length, other design parameters including span-to-rise ratio and deck-stiffening were considered, resulting in a total of seventy-two design concepts. Other important contributions made in this thesis include: (1) the development of a simple analytical model that describes the transition of shallow arches between pure arch behaviour and pure beam behaviour, (2) a comprehensive comparative study of 58 existing concrete arch bridges that characterizes the current state-of-the-art and serves as a valuable reference design tool, and (3) the development and experimental validation of general and simplified methods for calculating the capacity of slender ultra high-performance fibre-reinforced concrete members under compression and bending. The research presented in this thesis provides a means for designers to take full advantage of the high compressive and tensile strengths of the concrete and hence to exploit the economic potential offered by the material.