The resurgence, and eventual rise to prominence in the field of tissue engineering, that electrospinning has experienced over the last decade speaks to the simplicity and adaptability of the process. Electrospinning has been used for the fabrication of tissue engineering scaffolds intended for use in nearly every part of the human body: blood vessel, cartilage, bone, skin, nerve, connective tissue, etc. Diverse as the aforementioned tissues are in both form and function, electrospinning has found a niche in the repair of each due to its capacity to consistently create non-woven structures of fibers ranging from nano-to-micron size in diameter. These structures have had success in tissue engineering applications because of their ability to mimic the body’s natural structural framework, the extracellular matrix. In this study we examine a number of different techniques for altering scaffold properties (i.e. mechanical strength, degradation rate, permeability, and bioactivity) to create electrospun structures tailored to unique tissue specific applications; the end goal being the creation of a cellularized tissue engineering ligament analogue. To alter the mechanical properties of electrospun structures while maintaining high levels of bioactivity, synthetic polymers such as polydioxanone were blended in solution with naturally occurring proteins like elastin and fibrinogen prior to electrospinning. Cross-linking of electrospun structures, using glutaraldehyde, carbodiimide hydrochloride, and genipin, was also investigated as a means to both improve the mechanical stability and slow the rate of degradation of the structures. Fiber orientation and scaffold anisotropy were controlled through varying fabrication parameters, and proved effective in altering the mechanical properties of the structures. Finally, major changes in the structure of electrospun scaffolds were achieved through the implementation of air-gap electrospinning. Scaffolds created through air-gap electrospinning exhibited higher porosity’s than their traditionally fabricated counterparts, allowing for greater cell penetration into the scaffold. Overall, this collection of results provides insight into the diversity of electrospinning and reveals innumerous options, both pre and post fabrication, for the tissue engineer to create site-specific engineering scaffolds capable of mimicking both the form and function of native tissue.

Silk proteins have provided a source of unique and versatile building blocks in the fabrication of biomedical devices for addressing a range of applications. Critical to advancing this field is the ability to establish an understanding of these proteins in their native and engineered states as well as in developing scalable processing strategies, which can fully exploit or enhance the stability, structure, and functionality of the two constituent proteins, silk fibroin and sericin. The research outlined in this dissertation focuses on the evolution in architecture and capability of silks, to effectively position a functionally-diverse, renewable class of silk materials within the rapidly expanding field of smart biomaterials. Study of the process of building macroscopic silk fibers provides insight into the initial steps in the broader picture of silk assembly, yielding biomaterials with greatly improved attributes in the assembled state over those of protein precursors alone. Self-organization processes in silk proteins enable their aggregation into highly organized architectures through simple, physical association processes. In this work, a model is developed for the process of aqueous behavior and aggregation, and subsequent two-dimensional behavior of natural silk sericin, to enable formation of a range of distinct, complex architectures. This model is then translated to an engineered system of fibroin microparticles, demonstrating the role of similar phenomena in creating autonomously-organized structures, providing key insight into future “bottom up” assembly strategies. The aqueous behavior of the water-soluble silk sericin protein was then exploited to create biocomposites capable of enhanced response and biocompatibility, through a novel protein-template strategy. In this work, sericin was added to the biocompatible and biodegradable poly(amino acid), poly(aspartic acid), to improve its pH-dependent swelling response. This work demonstrated the production of a range of porous scaffolds capable providing meaningful response to environmental stimuli, with application in tissue engineering scaffolds and biosensing technologies. Finally, to expand the capabilities of silk proteins beyond process-driven parameters to directly fabricate engineered architectures, a method for silk photopatterning was explored, enabling the direct fabrication of biologically-relevant structures at the micro and nanoscales. Using a facile bioconjugation strategy, native silk proteins could be transformed into proteins with a photoactive capacity. The well-established platform of photolithography could then be incorporated into fabrication strategies to produce a range of architectures capable of addressing spatially-directed material requirements in cell culture and further applications in the use of non-toxic, renewable biological materials.

Neste trabalho, a irradiação por feixe de elétrons foi estudada como uma ferramenta para a reticulação do tecido de pericárdio bovino (PB). A conjugação de quitosana e fibroína de seda no tecido de PB liofilizado também foi objeto de estudo deste trabalho. Para isto, amostras de PB foram liofilizadas e irradiadas em um acelerador de elétrons utilizando-se diferentes doses e taxas de dose. Essas amostras foram analisadas por calorimetria exploratória diferencial (DSC), análises termogravimétricas (TGA), espectroscopia Raman, teste de intumescimento, microscopia eletrônica de varredura (MEV), microscopia eletrônica de transmissão (MET), testes de tração e quanto sua biofuncionalidade. Após as análises foi possível concluir que a irradiação do tecido na ausência de oxigênio favorece a reticulação das fibras de colágeno, enquanto na presença de oxigênio observou-se preferencialmente a cisão das fibras de colágeno. Ambas as amostras apresentaram diminuição de suas propriedades mecânicas. Também pôde-se concluir que a irradiação tanto na ausência quanto na presença de oxigênio produz um novo biomaterial cuja adesão e proliferação de células endoteliais é favorecida ao longo do tecido. Na segunda etapa deste trabalho amostras de PB liofilizadas foram incorporadas em soluções de quitosana, fibroína de seda e suas misturas (1:3, 1:1, 3:1). Depois de modificadas, as amostras foram novamente liofilizadas e submetidas à irradiação. Estas amostras foram caracterizadas por espectroscopia Raman, e avaliadas quanto sua citotoxicidade, biofuncionalidade e potencial de calcificação. Após lavagens das amostras de biomaterial com solução aquosa (NaCl 0,9%), as mesmas não apresentaram toxicidade. O teste de biofuncionalidade mostrou que as amostras de PQSFI (todas as proporções) favoreceram a adesão e crescimento das células endoteliais. Todas as amostras induziram a calcificação, entretanto apresentaram uma relação Ca/P menor do que a da hidroxiapatita. / In this work, electron beam irradiation was studied as a crosslinker of bovine pericardium tissue (BP). The treatment of BP with chitosan and silk fibroin was also the goal of this study. Samples of BP were freeze-dried and irradiated in an electron beam accelerator using different doses and dose rates. Samples were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Raman spectroscopy, water uptake tests, scanning electron microscopy (SEM), transmission electron microscopy (TEM), tensile tests and evaluation as biofunctionality. After analysis, it was concluded that irradiation of the tissue in the absence of oxygen promotes crosslinking of collagen fibers. On the other hand, in the presence of oxygen the chain scission of the collagen fibers was observed, and both samples suffered a decrease in their mechanical properties. It was also concluded that irradiation, both in the absence or presence of oxygen, promotes the adhesion and proliferation of endothelial cells throughout the tissue. In the second part of this work, lyophilized BP were incorporated into chitosan, silk fibroin solutions and mixtures of chitosan/silk fibroin in the ratio of 1:3, 1:1, 3:1. Then, the samples were again lyophilized and submitted to irradiation. These samples were characterized by Raman spectroscopy, and tested for their cytotoxicity, biofunctionality, and calcification. After washing the biomaterial with aqueous solution (NaCl 0.9%), the samples did not show cytotoxicity. Biofunctionality test showed that PQSFI samples (all proportions) promoted the adhesion and growth of endothelial cells. All samples induced calcification, but they exhibited a Ca/P ratio lower than hydroxyapatite.

A fibroína da seda (SF) é uma proteína fibrosa, com caráter hidrofóbico, produzida pelo bicho-da-seda (Bombyx mori L.), cuja produção e armazenamento ocorre em glândulas especializadas antes do processo de fiação em fibras. Recentemente, soluções de fibroína de seda regenerada (RSF) têm sido utilizadas para formar diferentes materiais tais como géis, membranas, filmes e esponjas, para aplicações médicas (Medicina Regenerativa) e em sistemas de liberação de fármacos. Neste trabalho, procuramos estudar o comportamento da solução RSF 2% com adição de 0,25, 0,5 e 1% de PVA (polímero sintético e hidrofílico) por meio de ensaios de reologia dos géis obtidos (SF:PVA), e caracterização das membranas obtidas por meio da secagem em moldes dos géis. Os ensaios de reologia mostraram uma inversão de módulos, com transição de caráter elástico (G\') para viscoso (G\") para SF1 a 3%, entre 230 e 900% de deformação (\'gama\'); transição de caráter viscoso para elástico para as blendas SF:PVA 0,5 e 1% em ensaio de frequência (\'ômega\'). Com o aumento de temperatura, todas as blendas mantiveram seus comportamentos elástico (SF:PVA 0,25%) e viscoso (SF:PVA 0,5 e 1%) até 49 - 51°C, com transição líquido-gel; o aumento dos módulos G\' e G\"com o resfriamento das amostras ocorreu em todas as blendas. As membranas obtidas das blendas SF:PVA tiveram maior absorção de tampão fosfato salino (PBS) após 5 min de ensaio, no qual a blenda SF:PVA apresentou maiores valores de absorção. A caracterização das membranas por FT-IR ATR e DRX mostrou que ocorreu uma transição de conformação aleatória e hélice \'alfa\' para folha \'beta\', para todas as membranas, indicando que a adição do PVA nas blendas promoveu transições silk I para silk II. Deslocamentos de modo vibracional de 1.637/cm (amida I) para 1.616/cm (amida I) com modo centrado em 1.512/cm (amida II) foram vistos em todas as blendas no FT-IR ATR, e difratogramas apresentaram picos característicos às estruturas silk I (2\'teta\' = 10,12º, 2\'teta\' = 12,2° e 2\'teta\' = 28,2º) e silk II (2\'teta\' = 20 - 21 °1). TGA e DSC mostraram uma interação entre as cadeias de RSF c PVA, pela presença de uma temperatura única ele transição vítrea (Tg) entre RSF e PVA. Imagens AFM das blendas mostraram a presença de estruturas nanofibrilares, em formato de ilhas compactas e ramos, confirmando a transição da fase amorfa de SF 2% para hélice \'alfa\' e folha \'beta\', com a adição do PVA. / Silk fibroin (SF) is a fibrous hydrophobic protein produced by silkworms (Bombyx mori L.), which production and storage occur into specialized glands previously fiber formation. Lately, regenerated silk fibroin (RSF) solutions have been used to produce different materials such as gels, membranes, films and sponges, for medical applications and drug delivery systems. In this study, the RSF with 0.25, 0.5 anel 1% PVA (synthetic and hydrophilic polymer) blends were characterized by rheological tests of the gels (SF:PVA), also membranes produced by casting process were characterized as well. Rheological tests showed moduli inversion with elastic to viscous behavior transition for SF 1 to 3%, between 230 anel 900% of strain (\'gama\'); a transition fram viscous to elastic behavior to SF:PVA 0.5 to 1% blends into frequency sweep tests was observed. With the temperature increment, all blends have kept their viscous anel elastic behavior until 49 - 51°C, and a liquid-gel transition occurred in the SF:PVA 0.5 and 1% blends, as well as all moduli have increased with the cooling stage of the samples. All membranes had the highest buffer absorption after 5 min of test, in which SF:PVA 0.5% blend presented high absorption values. FT-IR spectra and XRD diffractograms showed a transition from random and \'alfa\'-helix to \'beta\'-sheet, for all blends, indicating that PVA addition promotes silk I to silk II transition. Modal shifts were observed from 1.637/cm (amide I) to 1.616/cm (amide I) with a central mode in 1.512/cm (amide II) in all blends in the FT-IR ATR spectra. XRD diffractograms showed characteristic peaks of silk I structures (2\'teta\' = 10,12°, 2\'teta\' = 12,2° e 2\'teta\' = 28,2°) and silk II structures (2\'teta\' = 20 - 21 °1). TGA and DSC studies showed the possibility of interaction between SF and PVA chains by acquirement of mobility at once, at an intermediate temperature between SF anel PVA glass transition (Tg). AFM images exhibited different phases for all membranes, with the presence of nanofibers, wires, rods and branch islands, suggesting the formation of more organized structures, such as and \'alfa\'-helix and \'beta\'-sheet, with PVA addition.

Biomateriais que promovem e auxiliam a regeneração óssea vêm ganhando grande visibilidade em pesquisas na área de engenharia tecidual, em destaque os biocompósitos a partir de cerâmicas e polímeros. Muitos desafios abrangem essa área de pesquisa, sendo o principal, criar um material que mais se assemelha ao osso, não só em sua resistência mecânica, mas também em sua bioatividade e porosidade. Esse projeto tem como foco o desenvolvimento e processamento de blocos de biocompósito formados a partir de hidroxiapatita (HAp) e fibroína de seda (FS). A fibroína de seda, obtida a partir dos casulos do bicho-da-seda, foi lavada em solução de carbonato de sódio com concentração de 5% por 30 minutos. Sua dissolução foi realizada através de solução ternária contendo cloreto de cálcio, etanol e água, na proporção molar de 1:2:8. A HAp foi co-precipitada na FS dissolvida em solução ternária através de solução de fosfato (Na2HPO4) sob agitação constante. Os blocos foram prensados manualmente e avaliou-se sua morfologia, relação Ca/P e absorção de líquido definindo a melhor proporção de %HAp e %FS. Após a determinação da proporção 75%HAp e 25% FS, os blocos foram conformados em prensa hidráulica com pressões fixas de 50 e 100 MPa. As características morfológicas foram avaliadas através de análises de MEV, porosidade, absorção de líquidos, microtomografia computadorizada (?-CT) e medição da área superficial específica (BET). As características químicas e estruturais foram analisadas por EDS, FTIR, TGA e DRX. Além disso, avaliou-se a resistência à compressão, a bioatividade e a citotoxicidade do biocompósito. Os resultados mostram que o biocompósito estudado apresenta características químicas e estruturais próxima ao osso trabecular, resistência à compressão entre 2 e 10 MPa e porosidade entre 30% e 70%, é biocompatível e possui capacidade de formação de apatita. O biomaterial em estudo apresenta-se como uma boa perspectiva na área de engenharia tecidual óssea. / Biomaterials that promote and aid bone regeneration have gained great visibility in tissue engineering research, with emphasis on biocomposites from ceramics and polymers. Many challenges cover this area, the main is being to create a material similar to bone, not only in its mechanical strength but also in its bioactivity and porosity. This project focuses on the development and processing of biocomposite blocks formed by hydroxyapatite (HAp) and silk fibroin (SF). The silk fibroin, obtained from the cocoons of the silkworm, was washed in 5% sodium carbonate solution for 30 minutes. Its dissolution was carried out through a ternary solution containing calcium chloride, ethanol and water, in a molar ratio of 1: 2: 8. The HAp was co-precipitated in SF dissolved in ternary solution through phosphate solution (Na2HPO4) under constant stirring. The blocks were manually pressed and their morphology, Ca/P ratio and liquid absorption were evaluated to determine the best HAp/FS ratio. After defined the best ratio, 75%HAp and 25% FS, blocks were formed in a hydraulic press with fixed pressures (50 and 100 MPa). The morphological characteristics were evaluated by SEM, Porosity, Liquid Absorption, Computerized Microtomography (?-CT) and specific surface area (BET). The chemical and structural characteristics were analyzed by EDS, FTIR, TGA and XRD. In addition, the compressive strength, bioactivity and cytotoxicity of the composite were evaluated. The results show a biocomposite with chemical and structural characteristics close to the trabecular bone, mechanical resistance between 2 and 10 MPa and porosity between 30% and 70%, it is biocompatible and with apatite formation capacity. The biomaterial studied presents a good perspective in the field of bone tissue engineering.

Neste trabalho, a irradiação por feixe de elétrons foi estudada como uma ferramenta para a reticulação do tecido de pericárdio bovino (PB). A conjugação de quitosana e fibroína de seda no tecido de PB liofilizado também foi objeto de estudo deste trabalho. Para isto, amostras de PB foram liofilizadas e irradiadas em um acelerador de elétrons utilizando-se diferentes doses e taxas de dose. Essas amostras foram analisadas por calorimetria exploratória diferencial (DSC), análises termogravimétricas (TGA), espectroscopia Raman, teste de intumescimento, microscopia eletrônica de varredura (MEV), microscopia eletrônica de transmissão (MET), testes de tração e quanto sua biofuncionalidade. Após as análises foi possível concluir que a irradiação do tecido na ausência de oxigênio favorece a reticulação das fibras de colágeno, enquanto na presença de oxigênio observou-se preferencialmente a cisão das fibras de colágeno. Ambas as amostras apresentaram diminuição de suas propriedades mecânicas. Também pôde-se concluir que a irradiação tanto na ausência quanto na presença de oxigênio produz um novo biomaterial cuja adesão e proliferação de células endoteliais é favorecida ao longo do tecido. Na segunda etapa deste trabalho amostras de PB liofilizadas foram incorporadas em soluções de quitosana, fibroína de seda e suas misturas (1:3, 1:1, 3:1). Depois de modificadas, as amostras foram novamente liofilizadas e submetidas à irradiação. Estas amostras foram caracterizadas por espectroscopia Raman, e avaliadas quanto sua citotoxicidade, biofuncionalidade e potencial de calcificação. Após lavagens das amostras de biomaterial com solução aquosa (NaCl 0,9%), as mesmas não apresentaram toxicidade. O teste de biofuncionalidade mostrou que as amostras de PQSFI (todas as proporções) favoreceram a adesão e crescimento das células endoteliais. Todas as amostras induziram a calcificação, entretanto apresentaram uma relação Ca/P menor do que a da hidroxiapatita. / In this work, electron beam irradiation was studied as a crosslinker of bovine pericardium tissue (BP). The treatment of BP with chitosan and silk fibroin was also the goal of this study. Samples of BP were freeze-dried and irradiated in an electron beam accelerator using different doses and dose rates. Samples were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Raman spectroscopy, water uptake tests, scanning electron microscopy (SEM), transmission electron microscopy (TEM), tensile tests and evaluation as biofunctionality. After analysis, it was concluded that irradiation of the tissue in the absence of oxygen promotes crosslinking of collagen fibers. On the other hand, in the presence of oxygen the chain scission of the collagen fibers was observed, and both samples suffered a decrease in their mechanical properties. It was also concluded that irradiation, both in the absence or presence of oxygen, promotes the adhesion and proliferation of endothelial cells throughout the tissue. In the second part of this work, lyophilized BP were incorporated into chitosan, silk fibroin solutions and mixtures of chitosan/silk fibroin in the ratio of 1:3, 1:1, 3:1. Then, the samples were again lyophilized and submitted to irradiation. These samples were characterized by Raman spectroscopy, and tested for their cytotoxicity, biofunctionality, and calcification. After washing the biomaterial with aqueous solution (NaCl 0.9%), the samples did not show cytotoxicity. Biofunctionality test showed that PQSFI samples (all proportions) promoted the adhesion and growth of endothelial cells. All samples induced calcification, but they exhibited a Ca/P ratio lower than hydroxyapatite.

Diversos biomateriais podem ser aplicados na engenharia de tecidos, mas poucos são utilizados em contato direto com células-tronco na forma de suportes de micropartículas, devido à falta de adesão, espalhamento e toxicidade do material, de forma que os tornam inviáveis junto ao cultivo celular. Um biomaterial promissor para bioengenharia é a fibroína, proteína fibrosa presente no casulo do bicho da seda (Bombyx mori), devido à sua resistência mecânica, biocompatibilidade e mínima reação inflamatória, porém, suas caracteristicas são pouco conhecidas na literatura. O mesmo não ocorre com o colágeno que já é bastante estudado por pesquisadores e, assim como a fibroína, apresenta propriedades naturais que incluem baixa resposta imunológica, baixa toxicidade e habilidade de promover o crescimento celular, porém o uso do colágeno em sua maior parte é em forma de filmes, esponjas e membranas. Como existem poucos métodos relacionados para preparação e caracterização de micropartículas em formatos esféricos e porosos, este trabalho teve por objetivo desenvolver e caracterizar micropartículas à base de colágeno ou fibroína, tratadas ou não com glutaraldeído (GA), para ser utilizado como suporte para células-tronco mesenquimais e avaliar a citotoxicidade destes materiais em cultura celular.Nos resultados de Calorimetria Exploratória Diferencial para ambos os materiais, colágeno e fibroína quando submetidas a tratamento com GA, a temperatura de desnaturação e degradação aumenta, respectivamente. Na microscopia ótica, eletrônica de varredura e birrefringência, observa-se o aparecimento de rugosidade e poros e/ou bolhas de ar no interior das micropartículas em maior quantidade quando tratadas com GA, o que pode ser um fator positivo para aderência celular no suporte. A porcentagem de água absorvida é maior no colágeno devido às estruturas hidrofóbicas em maior quantidade na fibroína, porém, quando tratadas com GA, a absorção é estabilizada em um curto tempo em ambos os materiais. Os picos nos espectros de FTIR mostram as bandas amidas I, II e III dos materiais e as alterações sofridas quando em contato com GA e os testes de citotoxicidade que ambos materiais tratados ou não, são atóxicos, mas o desenvolvimento celular nas micropartículas de fibroína é mais lento e diminui quando tratados com GA, por possuir mais estruturas ordenadas na forma de -folha quando se necessita de um crescimento mais controlado das células nas micropartículas. / There are several biomaterials can that be used in tissue engineering, but few are used in direct contact with stem cells like scaffold in the microparticle form, because of the lack of adhesion, spreading and toxicity of the biomaterial, in order to make them nonviable in the cell culture. A promising biomaterial for bioengineering is fibroin, a fibrous protein present in the fibers of silkworm (Bombyx mori) cocoon, because of its mechanical strength, biocompatibility and minimal inflammatory reaction; however, little is still described in the literature. Not so with the collagen that is already well studied by researchers and as the fibroin, has natural properties that include low immune response, low toxicity and ability to promote cell growth, but the use of collagen is mostly in form of films, sponges and membranes. As there are few methods reported for preparation and characterization of microparticles in spherical shapes and porous, this study aimed to develop and characterize microparticles based on collagen or fibroin, treated or not with glutaraldehyde (GA), to be used as a support for cells mesenchymal stem cells and evaluating the cytotoxicity of these materials in cell culture.In the results of Differential Scanning Calorimetry (DSC) curves for both materials, collagen and fibroin when subjected to treatment with GA, the denaturation and degradation temperatures increases, respectively. In Optical Microscopy, MSCanning electronic Microscopy and Birefringence results, it is observed the onset of surface roughness and porosity and or air pockets within the microparticles in greater quantity when treated with GA, which may be a positive factor for cell attachment on the support. The percentage of water absorbed is greater in the collagen structures due to more hydrophobic structure than silk fibroin, but when in treated with GA, absorption is stabilized in a shorter time in both materials. The peaks in FTIR spectra show bands amide I, II and III of the materials and the changes suffered when in contact with GA and cytotoxicity tests are non-toxic to both biomaterials treated or not, however, in the growth of cells, the fibroin microparticles is slower and decreases when treated with GA, due to its more ordered structure in the form of -sheet and more spherical than collagen due to its more ordered -sheet structures, which may be very interesting when it needs a more controlled growth of cells on microspheres.

Blendas poliméricas de biopolímeros, além de apresentarem uma melhora das propriedades do material, ainda possuem as vantagens de serem biocompatíveis, biodegradáveis e apresentar baixa toxicicidade, como no caso de blendas de alginato de sódio e fibroína de seda. Membranas confeccionadas a partir desta mistura apresentam grande potencial no desenvolvimento de curativos de alto desempenho, proporcionando condições ótimas de cicatrização. Entretanto, o processo de mistura destes biopolímeros é bastante complexo e resulta na separação de fases, processo que ainda não foi muito explorado. Este trabalho buscou explorar experimentalmente o comportamento do equilíbrio de fases dos sistemas aquosos contendo fibroína de seda e alginato de sódio em diversos valores de pH. Soluções aquosas de fibroína foram previamente preparadas por meio de processo de diálise, e soluções de alginato, por meio de dissolução direta em água. Ambas as soluções eram misturadas em concentrações em que se desejava avaliar o comportamento de fases. Após a separação de fases, a fase líquida sobrenadante era coletada, a fibroína quantificada via espectrofotometria e o alginato, via calcinação. Observou-se que a região monofásica do diagrama de fases é pequena, e a separação de uma segunda fase ocorre em concentrações baixas dos dois biopolímeros. A separação de fases pôde ser descrita como a precipitação da fibroína pela adição de alginato, e a solubilidade da fibroína pôde ser descrita por meio da equação de Cohn. As curvas de solubilidade obtidas não apresentaram diferenças significativas em função do pH. Medidas do potencial Zeta de soluções de alginato e fibroína em diversas faixas de pH não mostraram diferenças significativas quanto à carga superficial das moléculas, o que é compatível com a ausência de influência do pH no equilíbrio de fases. / Polymer blends formed by biopolymers may show an improvement of material properties (compared to the pure biopolymers), and present advantages such as biocompatibility, biodegradability and low toxicity. An interesting biopolymer blend is that formed by sodium alginate and silk fibroin. Membranes prepared with this mixture show great potential in the development of high-performance wound dressing, since it provides optimum healing conditions. However, the mixing process of these two biopolymers is complex and has not been extensively explored. In this work the phase equilibrium behavior of aqueous systems containing silk fibroin and sodium alginate was experimentally studied at different pH values. Fibroin aqueous solutions were previously prepared through dialysis, and alginate solutions were prepared by direct dissolution in water. Both solutions were mixed at the concentration range in which the phase behavior of the system was to be assessed. After phase separation, the supernatant liquid phase was separated, the fibroin was quantified through spectrophotometry. and the alginate was quantified through calcination. The single-phase region of the phase diagram is small, and the separation of a second phase occurs at low concentrations of both biopolymers. The phase separation could be described as the precipitation of fibroin due to the addition of alginate, and the solubility of fibroin was described by the Cohn equation. The solubility was not significantly affected by the pH. The Zeta potential of either alginate or fibroin, measured in solutions of different pH values, did not present any significant difference concerning the surface charges of these macromolecules. This finding agrees with the absence of pH influence upon the phase equilibrium.

Blendas poliméricas de biopolímeros, além de apresentarem uma melhora das propriedades do material, ainda possuem as vantagens de serem biocompatíveis, biodegradáveis e apresentar baixa toxicicidade, como no caso de blendas de alginato de sódio e fibroína de seda. Membranas confeccionadas a partir desta mistura apresentam grande potencial no desenvolvimento de curativos de alto desempenho, proporcionando condições ótimas de cicatrização. Entretanto, o processo de mistura destes biopolímeros é bastante complexo e resulta na separação de fases, processo que ainda não foi muito explorado. Este trabalho buscou explorar experimentalmente o comportamento do equilíbrio de fases dos sistemas aquosos contendo fibroína de seda e alginato de sódio em diversos valores de pH. Soluções aquosas de fibroína foram previamente preparadas por meio de processo de diálise, e soluções de alginato, por meio de dissolução direta em água. Ambas as soluções eram misturadas em concentrações em que se desejava avaliar o comportamento de fases. Após a separação de fases, a fase líquida sobrenadante era coletada, a fibroína quantificada via espectrofotometria e o alginato, via calcinação. Observou-se que a região monofásica do diagrama de fases é pequena, e a separação de uma segunda fase ocorre em concentrações baixas dos dois biopolímeros. A separação de fases pôde ser descrita como a precipitação da fibroína pela adição de alginato, e a solubilidade da fibroína pôde ser descrita por meio da equação de Cohn. As curvas de solubilidade obtidas não apresentaram diferenças significativas em função do pH. Medidas do potencial Zeta de soluções de alginato e fibroína em diversas faixas de pH não mostraram diferenças significativas quanto à carga superficial das moléculas, o que é compatível com a ausência de influência do pH no equilíbrio de fases. / Polymer blends formed by biopolymers may show an improvement of material properties (compared to the pure biopolymers), and present advantages such as biocompatibility, biodegradability and low toxicity. An interesting biopolymer blend is that formed by sodium alginate and silk fibroin. Membranes prepared with this mixture show great potential in the development of high-performance wound dressing, since it provides optimum healing conditions. However, the mixing process of these two biopolymers is complex and has not been extensively explored. In this work the phase equilibrium behavior of aqueous systems containing silk fibroin and sodium alginate was experimentally studied at different pH values. Fibroin aqueous solutions were previously prepared through dialysis, and alginate solutions were prepared by direct dissolution in water. Both solutions were mixed at the concentration range in which the phase behavior of the system was to be assessed. After phase separation, the supernatant liquid phase was separated, the fibroin was quantified through spectrophotometry. and the alginate was quantified through calcination. The single-phase region of the phase diagram is small, and the separation of a second phase occurs at low concentrations of both biopolymers. The phase separation could be described as the precipitation of fibroin due to the addition of alginate, and the solubility of fibroin was described by the Cohn equation. The solubility was not significantly affected by the pH. The Zeta potential of either alginate or fibroin, measured in solutions of different pH values, did not present any significant difference concerning the surface charges of these macromolecules. This finding agrees with the absence of pH influence upon the phase equilibrium.

The goal of the thesis is to incorporate materials with either fluorescent or conductive properties in silk fibers, by feeding silkworms with a diet containing these materials. To achieve this, one would have to breed (rear) silkworm from eggs into larvaes, then to feed the silkworms with this special diet containing fluorescent or conductive materials. Samples of silk were then collected either from spun cocoons or via removing the silk producing organs (silk glands) from the silkworms via dissection. The samples were then analyzed with absorbance spectrometer, spectrofluorometer or via photoluminesecent measurement to determine if any materials had been incorporated into the silk fibers.   Silkworms were successfully reared from eggs up to moths, once the silkworm larvae had grown enough in size their diet were switches from their regular food (silkworm chow) to food containing conjugated molecules or polymers with fluorescent or conductive properties. A total of 14 materials were tested. One material gave a clear positive result and that was from the fluorescent compound Rhodamine B. Other fluorescent materials, Nile red and POWT yielded some results indicating their presence in the silk but the results were not conclusive. The rest of the materials all failed with being incorporated within the silk fibers; this was due to their lethality, size, lack of zwitterionic properties and such.  The properties of the materials are of great importance for the uptake process, where a small zwitterionic molecule has a great change of being taken up and incorporated in the silk fibers. Whereas a big materials such as a polymer without any zwitterionic will in most cases just follow through the food in the digestive track without any uptake.