The research on electrochemical sensor applications in combination with application-defined electronic circuits is a very fast developing field of modern sensorics. Device designing of unique integrated systems with specific properties and parameters is now becoming the everyday practice for producers of devices based on the latest technology progress in microelectronics. In the process of realization of a new device type, the main objective consists in increasing the possibility of detecting very low concentrations of heavy metals in the given chemical solution, extending the signal-to-noise ratio, and measuring the potential of a sensor. The general aim of this Master’s thesis is to design the topology of a sensor based on the thick film technology, to materialize the sensor, and to make experimental measurement using the sensor prototype. The practical reason for basing the measurement on the application of this thick film sensor is to find out whether the operational integration of the sensor and the circuit has been achieved according to the original hypothesis. Importantly, it is also necessary to determine whether the reproducibility of measured results has been reached. The innovative aspect of the created device consists in the improvement of output characteristics given by the integration of ASIC (IMAM CHIP). The integration of ASIC on the surface of the sensor eliminates the huge parasitic influence that affects the accuracy of measurement.

In recent years (Of late year)microelectronic technology significantly affected in the field of sensor technology, especially in the field of electrochemical sensors. This thesis deals with design and construction of thick-film voltammetric sensors array. The reason for proposal of voltammetric sensors array is to increase of speed, increase the accuracy and extension possibilities measurement compared with common systems.By reason of increase of sensitivity of these sensors it is efficient use the potentiostat chip for measurement output signal. Created sensors must fulfill the specified parameters and also requirements of thick-film technology. Next step is design the basic blocks of electronic circuit used to evaluate the measured values.

Tato diplomová práce se zabývá technologií tlustých vrstev a jejím možným použitím pro nekonvenční aplikace. První část práce je rešeršní a zaměřuje se především na aplikace tlustovrstvé technologie v různých oblastech použití. V teoretické části práce je dále popsána technologie LTCC, včetně technologických postupů výroby. V praktické části jsou řešeny dvě aplikace v tlustovrstvé technologii. Jedná se návrh a výrobu vysokofrekvenčního filtru a optického senzoru tlaku technologií LTCC. V závěru práce jsou provedena měření a jsou zhodnoceny dosažené výsledky.

No description available.

This dissertation is a historical and theoretical study of a number of discourses examining colour and cinema during the period 1909 to 1935 (trade press, film reviews, publications on film technology, manuals, catalogues and theoretical texts from the era). In this study, colour in cinema is considered as producing a number of aesthetic and representational questions which are contextualised historically; problems and qualities specifically associated with colour film are examined in terms of an interrelationship between historical, technical, industrial, and stylistic factors, as well as specific contemporary conceptions of cinema. The first chapter examines notions concerning the technical, material, as well as perceptual, origins of colour in cinema, and questions concerning indexicality, iconicity, and colour reproduction, through focusing on the relationship between the photographic colour process Kinemacolor, as well as other similar processes, and the established non-photographic colour methods during the early 1910s, with an in-depth analysis of the Catalogue of Kinemacolor Film Subjects, published in 1912. The second chapter examines notions concerning the stylistic, formal and narrative functions of colour in cinema, featuring a survey of the recurring comparisons between colour and sound, found in the writing of film history, in discourses concerning early Technicolor sound films, film technology, experimental films and experiments on synaesthesia during the 1920s, as well as Eisenstein’s notions of the functions of colour in sound film montage. The third chapter examines the question of colour and meaning in cinema through considering the relationship between colours and objects in colour film images (polychrome and monochrome, photographic and non-photographic) during the time frame of this study.

This thesis report presents a new design of a synchronization unit for high power impulse magnetron sputtering (HiPIMS) applications used for depositing thin films. The proposed system is composed of two major hardware parts: a microcontroller unit (MCU) and a field-programmable gate array (FPGA). The control range of the new system is increased by at least ten times compared to existing synchronization unit designed by Ionautics AB.In order to verify the system and benchmark its innovations, several batches of the thin film have been deposited using the new technology. It is shown that HiPIMS with synchronized pulsed substrate bias can effectively improve coating performance. Pulsed substrate bias with user-defined pulse width and delay time is possible to use in the new control mode proposed by this master thesis work; Bias mode. As a result, this master thesis work enables users to flexibly control the HiPIMS processes.

Thin films and coatings of oxides are used in various fields of science and technology, such as semiconductor and optoelectronic devices, gas sensors, protective and wear resistant coatings etc. Of late, there has been a tremendous interest in pure and doped vanadium dioxide as thermoelectric switch material. VO2 has been doped with hetero-atoms such as W, Mo, Nb, Ti etc. and effects of doping have been correlated with feasibility of being used as a smart window material. The oxide Al2O3 has been studied as an alternative gate dielectric. Ga2O3 is also a contender for replacing SiO2 as a dielectric material. Atomic layer deposition (ALD) is a technique for the deposition of thin films of various materials and is found to be of considerable scientific and technological importance. In particular, using β-diketonate complexes as precursors is very useful in preparing thin films of oxides, as these precursors already contain a metal-oxygen bond. In this thesis, β-diketonate complexes have been used as precursors for deposition of thin films. The thesis has been divided into two parts: First part deals with deposition and characterization of thin films of VO2 on glass and fused quartz. The second part deals with synthesis and chemical and thermal characterization of bimetallic Al-Ga acetylacetonates along with thin film deposition using the same. Chapter 1 presents a brief introduction to application of thin films of oxides in various fields of science and technology. A brief introduction to the ALD reactor used for the current work is also presented. The importance of thermal analysis of precursors for CVD is briefly reviewed. Chapter 2 deals with the instruments and methods used for the work done for this thesis. In Chapters 3 and 4 of the thesis, a detailed study of deposition of VO2 films on glass and fused quartz has been presented. The films deposited have been analyzed using a host of techniques, for their texture, microstructure and electrical properties. In spite of chemical similarities, considerable differences in structure and properties have been observed between the films deposited on the two substrates. These differences have been explained on the basis of the small chemical differences between the two substrates. Chapters 5, 6 and 7 deal with synthesis, thermal characterization and use of bimetallic Al-Ga precursors, respectively. The bimetallic acetylacetonates have been synthesized using ‘homogenization in solution’ approach. Chemical characterization of the precursors revealed that nominal percentages of Al and Ga are retained in the solid precursors. Single crystal structure confirmed the observation. Thermal analysis of the precursors showed that the precursors, which are solid solutions of Al and Ga acetylacetonates, show negative deviation from the Raoult’s Law. Films were deposited using these precursors and were found to near completely retain the composition of the precursors. Chapter 8 of the thesis presents the conclusions of the current work and proposes future directions.

Sensors is one of the major areas of current research. Thin film micro/nano sensors are gaining attention worldwide, as there is necessity of miniaturization. There are varieties of sensors available by utilizing different materials in bulk and thin film form for measuring parameters like temperature, pressure, flow, humidity etc. Apart from these, there are various sensors available to measure impact force. Impact sensor offers potential application possibilities in robotics, aerospace, structural & mechanical engineering and related areas. Many physical principles have been explored for the realization of impact sensor. The present thesis reports the efforts made in developing impact sensor using piezoelectric thin film. The necessary brief background information on impact sensors is presented in Chapter 1. This includes the description of available literature on impact sensors and their probable applications. In Chapter 2, a review of the various techniques such as thin film deposition techniques, film thickness measurement techniques, thin film characterization techniques, used in our work are explained in detail. Chapter 3 explains the direct and indirect methods of characterization used for confirming the piezoelectric property of zinc oxide thin films. The detailed experimental work carried out in realizing the impact sensor using piezoelectric thin films is presented in chapter 4. This includes design of the sensor, calibration setup used & the procedure followed and results obtained. Finally, we present the summary of the work carried out in the thesis, conclusions arrived at and the scope for carrying out further work in the direction of making the sensor more efficient.

The master thesis deals with multilayer structures and thick film technology. The main goal of this work is measure basic electric features of structures realized with thick film technology. The results will make possible more accurate design of these structures.

This thesis deals with non-conventional applications in the area of thick film technology, especially with indication of the temperature by thermodynamic sensors. The work summarizes thermodynamic sensors theory and also contains production data of the universal thermodynamic sensor realized on ceramic substrate, including measurement of its parameters and heat radiation.