The mass of carbon trapped in methane hydrates exceeds that in conventional fossil fuel reservoirs. While methane in coarse-grained hydrate-bearing sediments is technically recoverable, most methane hydrates are found in fine-grained marine sediments where gas recovery is inherently impeded by very low gas permeability. Using experimental methods and analyses, this thesis advances the understanding of fine-grained sediments in view of gas production from methane hydrates. The research scope includes: a new approach for the classification of fines in terms of electrical sensitivity, the estimation of the sediment volume contraction during hydrate dissociation, a pore-scale study of gas migration in sediments and the self-regulation effect of surfactants, the formation of preferential gas migration pathways at interfaces during gas production, pressure core technology for the characterization of hydrate bearing sediments without causing hydrate dissociation, and the deployment of a bio-sub-sampling chamber in Japan.

In this study I assess spatial and temporal patterns of sediment deposition in Pecausett Pond, located along the tidal extent of the Connecticut River, in order to assess the role of tides in the transport and storage of sediment and associated contaminants within floodplain tidal ponds. Findings reveal that tidal ponds have significantly higher rates of sedimentation compared to neighboring marshes due to the fact that these ponds have more accommodation space and receive uninterrupted tidal exchange with the main river. Tidal tie channels introduce a pulse of suspended sediment and contaminants from the main river into these ponds each flood tide, with sedimentation rates fast enough to allow settling before the subsequent ebb tide can transport these sediments back to the main river (i.e. tidal pumping). Some studies performed on the tidal floodplain of the Connecticut River show high deposition rates and have attributed periods of high accumulation to anomalously high river discharge events. However, this project shows that tides are more likely the major mechanism responsible for transporting and storing sediment and associated contaminants at backwater sites located along the tidal floodplain. Deposition rates in this 3-4 m deep pond exceed 2 cm/yr. These rates are far too high to maintain equilibrium morphology for much longer. However, ground penetrating radar surveys from the study site reveal truncated stratigraphy common to erosional unconformities, which suggest that mechanisms for sediment remobilization and removal may exist. Periods of episodic erosion therefore may be helping to maintain the morphology in this shallow environment, and allow for the high rates of short-term deposition. Further, a sudden increase in percent inorganic potentially associated with the opening or clearance of the tie-channel is observed at a sediment depth approximately between 1.9 to 2.2 m. A radiocarbon date obtained below this transition is consistent with a significant drop in sedimentation prior to this tie-channel development. High rates of sedimentation in Pecausett Pond are therefore likely relatively recent phenomena, transpiring over the last few centuries following early colonization.

Detailed information about the oceanic environment is essential for many applications in the field of marine geology, marine biology, coastal engineering, and marine operations. Especially, knowledge of the properties of the sediment body is often required. Acoustic remote sensing techniques have become highly attractive for classifying the sea bottom and for mapping the sediment properties, due to their high coverage capabilities and low costs compared to common sampling methods. In the last decades, a number of different acoustic devices and related techniques for analyzing their signals have evolved. Each sensor has its specific application due to limitations in the frequency range and resolution. In practice, often a single acoustic tool is chosen based on the current application, supported by other non-acoustic data where required. However, different acoustic remote sensing techniques can supplement each other, as shown in this thesis. Even more, a combination of complementary approaches can contribute to the proper understanding of sound propagation, which is essential when using sound for environmental classification purposes. This includes the knowledge of the relation between acoustics and sediment properties, the focus of this thesis. Providing a detailed three dimensional picture of the sea bottom sediments that allows for gaining maximum insight into this relation is aimed at.<p><p><p>Chapters 4 and 5 are adapted from published work, with permission:<p>DOI:10.1121/1.3569718 (link: http://asadl.org/jasa/resource/1/jasman/v129/i5/p2878_s1) and<p>DOI:10.1109/JOE.2010.2066711 (link: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=5618582&queryText%3Dsiemes)<p>In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of the Université libre de Bruxelles' products or services.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished