Polymeric materials are widely used in diverse applications. However, a major weakness in the majority of the thermoplastic polymers is their lack of ability to resist fire. Most of the chemicals and additives currently used to improve fire retardancy have deleterious effects on the environment. This research focuses on developing an environmentally safe and effective fire-retardant system for high density polyethylene (HDPE), using cellulose nanocrystals (CNCs) and zinc oxide (ZnO). The effect of CNCs coated with nano ZnO has been investigated for improving the fire resistance properties of the HDPE. Improved dispersion of CNCs into HDPE matrix was achieved by employing maleic anhydride as a coupling agent. It was found that addition of CNCs-ZnO can introduce a reasonable level of flame retardancy in HDPE matrix in addition to improving the maximum tensile strength and elongation at break.

The feasibility of using modified nano-chitosan particles as an environmentally friendly wood preservative agent was investigated in this research. Chitosan nano-particles were prepared from commercially available low molecular weight (LMW) chitosan and its derivative, trimethyl chitosan (TMC). The specific amount of sodium nitrite added to LMW chitosan through depolymerization process indicated the desired chitosan oligomers. Thin layer chromatography (TLC) was done to confirm the formation of chitosan oligomers with degree of polymerization four. Preparation of TMC was done through a quaternization process and Fourier-transform infrared spectroscopy (FTIR) graphs proved the formation of TMC. Sodium tri-poly phosphate (TPP) as a commercial fire retardant was added to these nanoparticles (chitosan oligomers and TMC) to form nanochitosan-TPP particles based on the ionic gelation method. The viscosity of chitosan nanoparticles which were made by chitosan oligomers and TMC were measured by rheometer. The results showed very low viscosity in comparison to LMW chitosan. The final concentration of chitosan oligomers, TMC and TPP in the nano-chitosan-TPP solution to treat wood were 12, 12 and 4.8% respectively. Then, these particles were used to treat southern yellow pine wood through vacuum impregnation process. Mass and volume of samples increased after treatment which means the nano-chitosan-TPP particles penetrated into cell walls. To study the leaching of treated samples, they were soaked to water according to the E11 standard test (AWPA, 2016) and to investigate the fungi resistance of treated samples, they were exposed to brown rot fungus (Gloeophyllum trabeum) and white rot fungus (Trametes versicolor) according to the E10 standard test (AWPA, 2016). Mass loss of the samples was compared to untreated wood controls. The results of leaching and fungi indicated that non quaternized nanochitosan-TPP particles were more effective than quaternized nanochitosan-TPP particles. Measuring the fire resistance and water vapor sorption isotherm of treated samples revealed that there were not any differences among treated and control samples.

Les matériaux composites à matrice polymère thermodurcissable interviennent dans de nombreux domaines d’application, parmi lesquels le secteur des transports. Ils présentent toutefois une faible tenue au feu qui limite leur utilisation pour des raisons évidentes de sécurité. De par les restrictions de plus en plus exigeantes de la Commission Européenne (REACH), il existe un réel besoin de se tourner vers des solutions alternatives. Des études récentes ont prouvé l’intérêt des Silsesquioxanes Oligomériques Polyhédriques (POSS) comme agents ignifuges, et particulièrement les POSS portant des ligands phenyl. L’objectif de ce travail a été d’étudier comment la tenue au feu de réseaux hybrides époxy-amine pouvait être améliorée par l’ajout de POSS dans ces matériaux. En faisant varier la nature des comonomères époxydes et amines, ainsi que la structure des POSS sélectionnés, des éléments de réponse ont pu être apportés à la question : existe-t-il une relation structure-propriété en ce qui concerne le comportement au feu des réseaux époxydes ? Des POSS fonctionnels et inertes ont été choisis pour cette étude, et une attention particulière a été portée sur le trisilanolphenyl POSS (POSSOH), pour lequel différents procédés de dispersion ont été mis en œuvre. Il a été montré que l’état de dispersion des POSS était significativement influencé par le type de ligands de ces POSS, mais également par le type de prépolymère époxyde utilisé. En particulier, des structures complexes, jamais observées, ont été découvertes dans les réseaux hybrides basés sur la Tétraglycidyl(diaminodiphenyl) méthane (TGDDM). Des études cinétiques visant à comprendre les interactions développées par les POSS au sein des réseaux ont été menées. Un fort pouvoir catalytique de l’association POSSOH avec un composé à base d’aluminium sur les réactions de réticulation a notamment été mis en évidence. D’autre part, les propriétés thermomécaniques des réseaux finals n’ont pas été modifiées de manière significative par l’ajout de POSS. Finalement, une amélioration remarquable de la tenue au feu a été obtenue dans certains cas, notamment par l’ajout de POSSOH en combinaison avec le composé métallique. La tenue au feu des réseaux à base de TGDDM a été identifiée comme étant liée à un mécanisme d’intumescence. / Thermoset polymer composite materials are used in a number of application domains, amongst which the transports sector, but they suffer from poor fire resistance which limits their use for obvious safety and security issues. With the increasingly demanding restrictions from the European Commission, there is a real need to seek for alternative solutions. Recent studies have found the Polyhedral Oligomeric Silsesquioxane (POSS) compounds interesting as fire retardant agents, particularly the POSS bearing phenyl ligands. The present work aimed at investigating how the fire retardancy of hybrid epoxy networks can be improved by incorporating Polyhedral Oligomeric Silsesquioxanes (POSS). In this study, the nature of the epoxy-amine comonomers was varied, as well as the POSS structure. An inert POSS and two multifunctional POSS were selected in order to generate various morphologies. The aim was to answer the question: does a structure-property relationship exist as concerns the fire behaviour of epoxy networks? Particular attention was dedicated to systems containing the trisilanolphenyl POSS (POSSOH) for which different processes of dispersion were implemented. The POSS dispersion state was shown to be greatly influenced by the type of POSS ligands, but also by the epoxy prepolymer nature in the case of the versatile POSSOH. In particular, intricate, never-observed morphologies were discovered in the networks based on Tetraglycidyl(diaminodiphenyl) methane (TGDDM) and containing POSSOH. The study of functional POSS-involving interactions and epoxy-amine kinetics in the model systems revealed the high catalytic power of the combined presence of POSSOH and an aluminium-based catalyst in the model epoxy networks, as well as the occurrence of homopolymerisation. The thermo-mechanical properties were not significantly modified by the addition of POSS. Finally, spectacular improvements in fire retardancy were obtained in some cases, in particular when the POSSOH and the Al-based catalyst were introduced in combination. The fire protection mechanism was attributed to intumescence in the TGDDM-based networks. The addition of POSSOH and the Al-catalyst was found to be efficient in all the epoxy-amine network types, which could not be clearly related to the POSSOH structures but was rather attributed to a chemical synergistic effect.