Spelling suggestions: "subject:"firstprinciple calculations"" "subject:"firstprinciples calculations""
1 |
Adsorption Of Gold Atoms On Anatase Tio2 (100)-1x1 SurfaceVural, Kivilcim Basak 01 September 2009 (has links) (PDF)
In this work the electronic and structural properties of anatase
TiO2 (100) surface and gold adsorption have been investigated
by using the first-principles calculations based on density
functional theory (DFT). TiO2 is a wide band-gap material and
to this effects it finds numerous applications in technology such
as, cleaning of water, self-cleaning, coating, solar cells and so
on.
Primarily, the relation between the surface energy of the anatase
(100)-1x1 phase and the TiO2-layers is examined. After
an appropriate atomic layer has been chosen according to the
stationary state of the TiO2 slab, the adsorption behavior of
the Au atom and in the different combinations are searched for both
the surface and the surface which is supported by a single Au
atom/atoms. It has been observed that a single Au atom tends to
adsorb to the surface which has an impurity of Au atom or atoms.
Although, the high metal concentration on the surface have increased
the strength of the adsorption, it is indicated that the system
gains a metallic property which is believed to cause problems in the
applications. In addition, the gold clusters of the dimer (Au2)
and the trimer (Au3) have been adsorbed on the surface and
their behavior on the surface is investigate. It is observed that
the interaction between Au atoms in the atomic cluster each other is
stronger than that of gold clusters and the surface.
|
2 |
The atomic struture of inversion domains and grain boundaries in wurtzite semonconductors : an investigation by atomistic modelling and high resolution transmission electron microscopy / Structure atomique des domaines d’inversion et joints de grains dans les semiconducteurs wurtzite : modélisation atomistique et microscopie électronique en transmission haute résolutionLi, Siqian 04 December 2018 (has links)
Au cours de ce travail, nous avons étudié deux types de défauts interfaciaux: domaines d’inversion (DI) et joints de grains (JG) dans des semiconducteurs de structure wurtzite (nitrures- d’éléments III, ZnO et l’hétérostructure ZnO/GaN) en utilisant le MET haute résolution et la modélisation ab initio. Dans le cas des DI, nos analyses théoriques montrent qu'une configuration tête-à-tête avec une séquence d'empilement à l’interface AaBbAa-AcCaA (H4) est la structure la plus stable dans les composés binaires (nitrures et ZnO wurtzites). De plus, un gaz d’électrons (2DEG) ou de trous (2DHG) à 2 dimensions est formé pour les configurations « tête-à-tête » ou queue-à-queue. A l’interface ZnO/GaN, l'observation de MET très haute résolution a confirmé la configuration H4 avec une interface -Zn-O-Ga-N. Notre modélisation théorique a mis en évidence la formation d’un gas de trous à 2 dimensions à cette hétérointerface. Nous avons aussi réalisé l’étude topologique, théorique et par MET des joints de grains de rotation autour de l’axe [0001] dans ces matériaux. Dans le GaN, nous avons trouvé que les plans du joint sont simplement formés par des dislocations de type a déjà connues pour le matériau en couche mince. Par contre, dans ZnO, la théorie topologique est complétement démontrée, et la dislocation [101 ̅0] est une brique de base dans la constitution des joints de grains avec des cycles d’atomes 6-8-4-. / In this work, we investigated two kinds of interfacial defects: inversion domain boundaries (IDBs) and grain boundaries (GB) in wurtzite semiconductors (III-nitrides, ZnO and ZnO/GaN heterostructure) using high-resolution TEM and first-principle calculations. For IDBs, theoretical calculation indicated that a head-to-head IDB with an interfacial stacking sequence of AaBbAa-AcCaA (H4) is the most stable structure in wurtzite compounds. Moreover, 2-dimensional electron gas (2DEG) and 2-dimensional hole gas (2DHG) build up in head-to-head and tail-to-tail IDBs, respectively. Considering the IDB at the ZnO/GaN heterointerface, TEM observations unveiled the H4 configuration with a -Zn-O-Ga-N interface. Moreover the theoretical investigation also confirmed stability of this interface along with the corresponding formation of a 2DHG. A detailed topological, TEM and theoretical investigation of [0001] tilt Grain Boundaries (GBs) in wurtzite symmetry has also been carried out. In GaN, it is shown that the GBs are only made of separated a edge dislocations with 4, 5/7 and 8 atoms rings. For ZnO, a new structural unit: the [101 ̅0] edge dislocation made of connected 6-8-4-atom rings is reported for the first time, in agreement with an early theoretical report on dislocations and jogs in the wurtzite symmetry.
|
3 |
Al-, Y-, and La-doping effects favoring intrinsic and field induced ferroelectricity in HfO₂: a first principles studyMaterlik, Robin, Künneth, Christopher, Falkowski, Max, Mikolajick, Thomas, Kersch, Alfred 14 November 2023 (has links)
III-valent dopants have shown to be most effective in stabilizing the ferroelectric, crystalline phase in atomic layer deposited, polycrystalline HfO₂ thin films. On the other hand, such dopants are commonly used for tetragonal and cubic phase stabilization in ceramic HfO₂. This difference in the impact has not been elucidated so far. The prospect is a suitable doping to produce ferroelectric HfO₂ ceramics with a technological impact. In this paper, we investigate the impact of Al, Y, and La doping, which have experimentally proven to stabilize the ferroelectric Pca21 phase in HfO₂, in a comprehensive first-principles study. Density functional theory calculations reveal the structure, formation energy, and total energy of various defects in HfO₂. Most relevant are substitutional electronically compensated defects without oxygen vacancy, substitutional mixed compensated defects paired with a vacancy, and ionically compensated defect complexes containing two substitutional dopants paired with a vacancy. The ferroelectric phase is strongly favored with La and Y in the substitutional defect. The mixed compensated defect favors the ferroelectric phase as well, but the strongly favored cubic phase limits the concentration range for ferroelectricity. We conclude that a reduction of oxygen vacancies should significantly enhance this range in Y doped HfO₂ thin films. With Al, the substitutional defect hardly favors the ferroelectric phase before the tetragonal phase becomes strongly favored with the increasing concentration. This could explain the observed field induced ferroelectricity in Al-doped HfO₂. Further Al defects are investigated, but do not favor the f-phase such that the current explanation remains incomplete for Al doping. According to the simulation, doping alone shows clear trends, but is insufficient to replace the monoclinic phase as the ground state. To explain this fact, some other mechanism is needed.
|
4 |
Solid-Solution Strengthening and Suzuki Segregation in Co- and Ni-based AlloysDongsheng Wen (12463488) 29 April 2022 (has links)
<p>Co and Ni are two major elements in high temperature structural alloys that include superalloys for turbine engines and hard metals for cutting tools. The recent development of complex concentrated alloys (CCAs), loosely defined as alloys without a single principal element (e.g. CoNiFeMn), offers additional opportunities in designing new alloys through extensive composition and structure modifications. Within CCAs and Co- and Ni-based superalloys, solid-solution strengthening and stacking fault energy engineering are two of the most important strengthening mechanisms. While studied for decades, the potency and quantitative materials properties of these mechanisms remain elusive. </p>
<p><br></p>
<p>Solid-solution strengthening originates from stress field interactions between dislocations and solute of various species in the alloy. These stress fields can be engineered by composition modification in CCAs, and therefore a wide range of alloys with promising mechanical strength may be designed. This thesis initially reports on experimental and computational validation of newly developed theories for solid-solution strengthening in 3d transition metal (MnFeCoNi) alloys. The strengthening effects of Al, Ti, V, Cr, Cu and Mo as alloying elements are quantified by coupling the Labusch-type strengthening model and experimental measurements. With large atomic misfits with the base alloy, Al, Ti, Mo, and Cr present strong strengthening effects comparable to other Cantor alloys. </p>
<p> </p>
<p>Stacking fault energy engineering can enable novel deformation mechanisms and exceptional strength in face-centered cubic (FCC) materials such as austenitic TRIP/TWIP steels and CoNi-based superalloys exhibiting local phase transformation strengthening via Suzuki segregation. We employed first-principles calculations to investigate the Suzuki segregation and stacking fault energy of the FCC Co-Ni binary alloys at finite temperatures and concentrations. We quantitatively predicted the Co segregation in the innermost plane of the intrinsic stacking fault (ISF). We further quantified the decrease of stacking fault energy due to segregation. </p>
<p><br></p>
<p>We further investigated the driving force of segregation and the origin of the segregation behaviors of 3d, 4d and 5d elements in the Co- and Ni-alloys. Using first-principles calculations, we calculated the ground-state solute-ISF interaction energies and revealed the trends across the periodic table. We discussed the relationships between the interaction energies and the local lattice distortions, charge density redistribution, density of states and local magnetization of the solutes. </p>
<p><br></p>
<p>Finally, this thesis reports on new methodologies to accelerate first-principles calculations utilizing active learning techniques, such as Bayesian optimization, to efficiently search for the ground-state energy line of the system with limited computational resources. Based on the expected improvement method, new acquisition strategies were developed and will be compared and presented. </p>
|
Page generated in 0.1233 seconds