Made available in DSpace on 2014-06-11T19:33:01Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-02-16Bitstream added on 2014-06-13T20:24:35Z : No. of bitstreams: 1 guimaraes_ms_dr_arafo.pdf: 1443329 bytes, checksum: 2d3d8b079af9426aadd16dd726576433 (MD5) / O objetivo deste trabalho, dividido em três estudos, foi investigar (1) a reparabilidade de um cimento de ionômero de vidro modificado por resina, (2) o efeito cariostático e (3) a retenção de selantes ionoméricos aderidos ao esmalte não desgastado com sistemas adesivos autocondicionantes simplificados. Materiais e Métodos: Para o estudo 1 foram confeccionados 60 espécimes de cada material, Vitremer (VT) e resina Z250 (RC). Após envelhecimento químico e térmico, eles foram divididos em 3 grupos de acordo com o tratamento mecânico da superfície: ponta diamantada em alta rotação, ponta em ultra-som e sem desgaste. Cada espécime foi reparado com o mesmo material utilizado inicialmente. Aplicou-se na superfície do VT o Vitremer Primer (VP), e para a resina, utilizou-se ácido fosfórico seguido de adesivo Single Bond. Os espécimes foram isolados deixando exposta a interface de união. Após novo envelhecimento, os mesmos foram impregnados por nitrato de prata, seccionados e avaliados quanto à infiltração e formação de fendas. Os dados foram analisados pelos testes de Kruskal-Wallis e Mann-Whitney (α=0,05). No segundo estudo 64 incisivos bovinos foram distribuídos em 4 grupos segundo o tratamento da superfície de esmalte: VP, Prompt L-Pop (Pr), Xeno III (Xe) ou sem tratamento. Um cilindro de VT foi construído em metade dos dentes, enquanto que a RC foi utilizada na outra metade. Os corpos de prova foram 19 submetidos a desafio cariogênico e seccionados, para realização de testes de dureza em três regiões: externa, união e interna, até a profundidade de 300 μm. Os dados transformados em porcentagem de perda mineral foram analisados pelo teste de ANOVA complementado pelo teste de Tukey ao nível de significância de 5%. No terceiro estudo, 20 pares de molares permanentes hígidos foram selecionados de crianças entre 6 e 10 anos. Em um dos dentes foi aplicado... / The purpose of this work, divided into three studies, was to investigate (1) the reparability of a resin-modified glass-ionomer cement, as well as (2) the cariostatic effect and (3) retention of glass-ionomer sealants bonded to enamel with one-step self-etching adhesive systems. Materials and Methods: For the first study, 60 specimens were prepared with Vitremer (VT) and Z250 resin. After chemical and thermal aging, the specimens were divided into 3 groups according to the mechanical treatment of the surface: diamond bur, ultrasound coupled bur or no treatment. Each specimen was repaired with the original restorative material. For VT repairs, Vitremer Primer (VP) was first applied while for composite resin the surface was phosphoric acid etched followed by the application of Single Bond. The specimens were coated with acid resistant varnish except for 1 mm around de interface. After additional aging, the specimens were impregnated by silver nitrate and sectioned medialy for the evaluation of silver infiltration and gap formation in SEM. Data were submitted to Kruskal-Wallis and Mann-Whitney tests (α=0.05). In the second study, 64 bovine teeth were randomly assigned to 4 groups according to the enamel surface treatment: VP, Prompt L-Pop (Pr), Xeno III (Xe) or no treatment. A cylinder of VT was built up in half of the teeth while a composite resin was used in the other half. The teeth were then submitted to a cariogenic challenge after which they 23 were medialy cut. Transversal hardeness evaluation was performed in three regions, external, interface and internal, up to the depth of 300μm. Hardness numbers were converted to percentage of mineral loss and the data were submitted to ANOVA and Tukey tests at the level of significance of 5%. For the third study, 20 pairs of sound permanent molars were selected from children between 6 and 10 years of age. One tooth of the pair received... (Complete abstract click electronic access below)

Orientador: Josimeri Hebling / Banca: Elisa Aparecida Maria Giro / Banca: Angela Cristina Cilense Zuanon / Banca: Célia Regina Moreira Lanza / Banca: Darlon Martins Lima / Resumo: O objetivo deste trabalho, dividido em três estudos, foi investigar (1) a reparabilidade de um cimento de ionômero de vidro modificado por resina, (2) o efeito cariostático e (3) a retenção de selantes ionoméricos aderidos ao esmalte não desgastado com sistemas adesivos autocondicionantes simplificados. Materiais e Métodos: Para o estudo 1 foram confeccionados 60 espécimes de cada material, Vitremer (VT) e resina Z250 (RC). Após envelhecimento químico e térmico, eles foram divididos em 3 grupos de acordo com o tratamento mecânico da superfície: ponta diamantada em alta rotação, ponta em ultra-som e sem desgaste. Cada espécime foi reparado com o mesmo material utilizado inicialmente. Aplicou-se na superfície do VT o Vitremer Primer (VP), e para a resina, utilizou-se ácido fosfórico seguido de adesivo Single Bond. Os espécimes foram isolados deixando exposta a interface de união. Após novo envelhecimento, os mesmos foram impregnados por nitrato de prata, seccionados e avaliados quanto à infiltração e formação de fendas. Os dados foram analisados pelos testes de Kruskal-Wallis e Mann-Whitney (α=0,05). No segundo estudo 64 incisivos bovinos foram distribuídos em 4 grupos segundo o tratamento da superfície de esmalte: VP, Prompt L-Pop (Pr), Xeno III (Xe) ou sem tratamento. Um cilindro de VT foi construído em metade dos dentes, enquanto que a RC foi utilizada na outra metade. Os corpos de prova foram 19 submetidos a desafio cariogênico e seccionados, para realização de testes de dureza em três regiões: externa, união e interna, até a profundidade de 300 μm. Os dados transformados em porcentagem de perda mineral foram analisados pelo teste de ANOVA complementado pelo teste de Tukey ao nível de significância de 5%. No terceiro estudo, 20 pares de molares permanentes hígidos foram selecionados de crianças entre 6 e 10 anos. Em um dos dentes foi aplicado... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The purpose of this work, divided into three studies, was to investigate (1) the reparability of a resin-modified glass-ionomer cement, as well as (2) the cariostatic effect and (3) retention of glass-ionomer sealants bonded to enamel with one-step self-etching adhesive systems. Materials and Methods: For the first study, 60 specimens were prepared with Vitremer (VT) and Z250 resin. After chemical and thermal aging, the specimens were divided into 3 groups according to the mechanical treatment of the surface: diamond bur, ultrasound coupled bur or no treatment. Each specimen was repaired with the original restorative material. For VT repairs, Vitremer Primer (VP) was first applied while for composite resin the surface was phosphoric acid etched followed by the application of Single Bond. The specimens were coated with acid resistant varnish except for 1 mm around de interface. After additional aging, the specimens were impregnated by silver nitrate and sectioned medialy for the evaluation of silver infiltration and gap formation in SEM. Data were submitted to Kruskal-Wallis and Mann-Whitney tests (α=0.05). In the second study, 64 bovine teeth were randomly assigned to 4 groups according to the enamel surface treatment: VP, Prompt L-Pop (Pr), Xeno III (Xe) or no treatment. A cylinder of VT was built up in half of the teeth while a composite resin was used in the other half. The teeth were then submitted to a cariogenic challenge after which they 23 were medialy cut. Transversal hardeness evaluation was performed in three regions, external, interface and internal, up to the depth of 300μm. Hardness numbers were converted to percentage of mineral loss and the data were submitted to ANOVA and Tukey tests at the level of significance of 5%. For the third study, 20 pairs of sound permanent molars were selected from children between 6 and 10 years of age. One tooth of the pair received... (Complete abstract click electronic access below) / Doutor

Indiana University-Purdue University Indianapolis (IUPUI) / Purpose: Dental sealant forms a physical barrier to prevent pit and fissure caries; therefore, the retention rate becomes a main factor of the sealant’s effectiveness. Electrospun nylon-6/N6 nanofibers have shown good mechanical properties, such as high tensile strength and fracture toughness. Chitosan/CH has received significant attention due to properties such as antibacterial activity. The purpose of this study was to synthesize and evaluate the effect of incorporating N6 and CH electrospun nanofibers on the physical-mechanical and antibacterial properties of an experimental resin-based sealant. Methods and Materials: Nanofiber synthesis: N6 pellets were dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol at a concentration of 10wt%. Practical-grade chitosan was dissolved in trifluoroacetic acid and dichloromethane (60:40 TFA/DCM) at 7 wt%. Electrospinning parameters were optimized in order to fabricate defect-free N6 and chitosan nanofiber mats. Morphological and chemical characterizations were performed by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy, respectively after vacuum drying the mats for 48 h. The average fiber diameter was determined from SEM images by measuring the diameter of 120 fibers using ImageJ software. Experimental Sealant: N6 and CH electrospun mats (3×3cm2) were immersed into a resin mixture of BIS-GMA/TEGDMA. Once no bubbles were seen, the resin-modified N6 and CH mats were put on a glass plate, light-cured (“TRIAD 2000”) for 2 min and then submitted to a cryomilling process to obtain a fine micron-sized powder. Three different filler levels (1 wt%, 2.5 wt%, 5 wt%) were used to prepare the N6 and CH incorporated resin-based sealants. Additionally, a commercially available resin-based sealant and the experimental resin mixture (unfilled) were used as controls. Three-point flexural testing, Vickers microhardness testing, and agar diffusion testing were performed on the experimental sealants and the commercial sealant. Data were analyzed by one-way ANOVA and Fisher's Protected Least Significant Differences Pair-wise comparisons between groups (5%). Results: The average fiber diameter for N6 was found to be 503±304 nm and 595±411 nm for CH. No significant difference was found between fiber diameter (p = 0.0601). FTIR confirmed the characteristic peaks for N6 ((CO-NH and [-(CH2)5-].) and CH (N-H and C2F3O2-). CH-5% group had significantly higher (p = 0.0000) FS (115.3±4.5 MPa) than all other groups. CH-1% and CH-2.5% groups had significantly higher FS than the control (unfilled) (p = 0.0016 and p = 0.0033 respectively); Helioseal Clear (p = 0.0000), and nylon groups. N6-5% had significantly higher flexural strength than Helioseal Clear (p = 0.0013) and N6-2.5% (p = 0.0250). CH-1% had significantly higher hardness values than all other groups, and CH-5% (p = 0.0414) had significantly higher values than N6-2.5%. No antibacterial inhibition was seen in any of the tested groups. Conclusions: CH and N6 nanofibers were successfully prepared via electrospinning and used to modify the experimental resin-based dental sealants. The overall results indicated that CH-containing sealants presented the highest flexural strength and hardness; however, none of the CH groups displayed antimicrobial properties. Further investigation is needed to enhance the physico-mechanical properties of the experimental resin-based sealants using nylon-6 and CH.

Our study adds to the understanding of dental caries prevention in underserved populations. Dental caries is the most common disease of childhood but can be easily prevented. It is therefore essential that policy makers use evidence to promote policies that will help reduce the burden of caries in high-risk children. We collected socioeconomic and demographic data through written surveys from parents of children at the Lyford Consolidated Independent School District in Willacy County. We got a 60% response to our survey. The survey data was matched with dental examination data from a teledentistry project. Only 19% of children in our matched sample had any sealant but 43% had at least one dental caries. Of those without sealants, almost half (49%) had caries while of those with sealants only 19% had any caries. We also found that while half (48%) of those from low-income households (ie, annual income <$25,000) had caries, only a third (34%) of those in high-income households had any caries. Our data analysis involved econometric modeling to study the impact of various factors including dental sealants on the occurrence of dental caries. We assumed dental sealant application to be a proxy for past preventive dental care. We used multivariate probit regression to test for endogeneity in our model. The estimation results from univariate probit models showed a strong and robust preventive effect of dental sealants on dental caries. We used Ordinary Least Squares (OLS), logit, probit, and logistic regressions to confirm the results and obtained similar findings. We used our fitted model to simulate the effect of providing sealants to all children in our sample and found that there will be a 52% - 68% decrease in the mean predicted probability of caries in different scenarios. Finally, we used cost estimates from published studies and the annual survey of dental fee by the American Dental Association to calculate cost-benefit of providing sealants through school-based programs. We found school-based sealant programs to be cost-beneficial. Our analysis leads to a recommendation to promote school-based sealant programs in underserved populations. / text