The flatbed scanner method for air void analysis of concrete is investigated through a comparison study with the standard ASTM C457 manual and Rapid Air 457 test methods. Air void parameters including air content and spacing factor are determined by image analysis of a large population of scanned samples through contrast enhancement and threshold determination procedures. It is shown that flatbed scanner method is giving comparable results to manual and Rapid Air 457 methods. Furthermore, a comparison of the air void chord length distributions obtained from the two methods of flatbed scanner and Rapid Air 457 has been implemented in this research. The effect of having different settings in the scanning process of scanner method is also investigated. Moreover, a threshold study has been performed that showed the flatbed scanner method can be employed in combination with manual and Rapid Air 457 methods as a time and cost saving strategy.

The flatbed scanner method for air void analysis of concrete is investigated through a comparison study with the standard ASTM C457 manual and Rapid Air 457 test methods. Air void parameters including air content and spacing factor are determined by image analysis of a large population of scanned samples through contrast enhancement and threshold determination procedures. It is shown that flatbed scanner method is giving comparable results to manual and Rapid Air 457 methods. Furthermore, a comparison of the air void chord length distributions obtained from the two methods of flatbed scanner and Rapid Air 457 has been implemented in this research. The effect of having different settings in the scanning process of scanner method is also investigated. Moreover, a threshold study has been performed that showed the flatbed scanner method can be employed in combination with manual and Rapid Air 457 methods as a time and cost saving strategy.

<p>This paper examines Hannah Höchs photomontage <em>Schnitt mit dem Küchenmesser Dada durch die letzte weimaren bierbauchkulturepoche Deutschlands</em>. The paper has as its aims to understand and analyze the predominated allegorical interpretation of <em>Schnitt</em> and to develop a logic how meaning is produced when a viewer look at <em>Schnitts</em> surface. The paper finds that the predominated interpretation has been arbitrarily created out of a specific spectator that acts in a specific context and conclude instead that the predominated interpretation should be understood as a potential interpretation by a potential viewer. The paper continues to create an understanding of <em>Schnitt</em> as a flatbed picture to establish that as a postulate and to use it in the later semiotic dissection of <em>Schnitts</em> surface. The paper then semiotically explains how a viewers meaning is produced by creating a chain with <em>Schnitts</em> photographical fragments and connecting these with syntagmatic relations.</p>

This paper examines Hannah Höchs photomontage Schnitt mit dem Küchenmesser Dada durch die letzte weimaren bierbauchkulturepoche Deutschlands. The paper has as its aims to understand and analyze the predominated allegorical interpretation of Schnitt and to develop a logic how meaning is produced when a viewer look at Schnitts surface. The paper finds that the predominated interpretation has been arbitrarily created out of a specific spectator that acts in a specific context and conclude instead that the predominated interpretation should be understood as a potential interpretation by a potential viewer. The paper continues to create an understanding of Schnitt as a flatbed picture to establish that as a postulate and to use it in the later semiotic dissection of Schnitts surface. The paper then semiotically explains how a viewers meaning is produced by creating a chain with Schnitts photographical fragments and connecting these with syntagmatic relations.

Tillsammans med företaget Houdini Sportswear har det här projektets ämne och avgränsningar tagits fram. Houdini är ett svenskt klädföretag som designar friluftskläder av hög kvalitet och med stort fokus på funktion och komfort. De letar ständigt efter nya lösningar för utveckling kring smartare materialval, förbättrad funktion och komfort och mindre materialåtgång. I det här projektet vill Houdini undersöka hur man kan utveckla förhållandet mellan värmeisolering och vikt i flatstickade textila strukturer. Genom att öka textilens värmeisolerande förmåga med fokus på minskad vikt kan både materialåtgång och ökad funktion och komfort nås. En av de viktigaste faktorerna som bidrar till hög värmeisolerande förmåga är mängden instängd stilla luft i den textila strukturen. En tät ytstruktur och mycket volym med många luftfickor är därför intressant för att behålla och immobilisera luften i varan. Syftet med studien är att undersöka hur justeringar av parametrar i en distanstextil, stickad på flatstickmaskin påverkar den värmeisolerande förmågan. Tillsammans med Houdini har en viktbegränsning satts på 400 g/m2 och genom hela studien används endast en typ av ullgarn med garngrovlek Nm 48/2 för att skapa en vara som är i monomaterial och som relativt lätt kan brytas ner.   För att testa den värmeisolerande förmågan hos textilier idag använder Houdini och flera andra företag standardiserade testmetoder. På forskningsinstitutet Swerea IVF finns möjligheten att testa sina textilier med vald testmetod. Dessa metoder är dock otillgängliga och kräver avancerad utrustning som kan försvåra processen och ta lång tid. Studiens syfte är därför även att ta fram och jämföra en egen, mer lättillgänglig, framtagen testmetod för värmeisolering med två standardiserade testmetoder, SS-­ISO 5085-­1:2004 och ISO 11092:2014, för att se om och hur resultaten varierar mellan dem.   En förstudie genomförs där olika bindningar och två egna testmetoder för värmeisolering tas fram. En av testmetoderna och en distanstextil utvecklas vidare i huvudstudien. Fokus ligger på variationer av distanstrådens masklängd och placering. Samtliga prover från huvudstudien testas på den egna testmetoden och vissa utvalda prover testas på de två nämnda standardiserade testmetoderna på Swerea IVF. Sedan görs en jämförelse mellan resultaten.   Resultatet visar att det inte finns något tydligt samband mellan ökad masklängd och ökad värmeisoleringsförmåga. Däremot kan vissa slutsatser dras om att ökade intervaller av distanstrådens placering kan öka den värmeisolerande förmågan. Detta ökar dock även vikten. Resultat från mätningar med tre olika testmetoder visar att rangordningen av provers värmeisolerande förmåga skiljer sig mellan de olika metoderna. Den egna testmetoden bör därför vidareutvecklas men anses ändå ha potential för att jämföra provers värmeisolerande förmåga. / This study is a collaboration with the sportswear company Houdini Sportswear. They are looking for new ways to improve function and comfort in their garments with less material waste and choosing more sustainable materials. The aim of this study is to investigate the relationship between heat and weight in flat bed knitted spacer structures and what parameters that affects it. By creating a material with high heat insulating properties and with focus on reducing the weight it is possible to reduce the material waste and to achieve an improved function. One of the most important factors contributing to high insulation value is the amount of entrapped still air within the textile structure. This project therefore investigates how the stitch length and the placement of the spacer thread can affect the amount of air within the structure and thereby the thermal insulation. Together with Houdini a weight limit has been set to 400 g/m2 and only one type of wool yarn is used throughout the project in order to make a mono-­material fabric that can more easily degrade.   When measuring the thermal insulation properties of a fabric standardized methods are often used. These might have advanced equipment and be hard to access.The second aim of this project is therefore to develop a more accessible test method for measurement of thermal insulation in textiles and also to compare the results from the own method with the results from two standardized methods.   A pre study is made where different structures and two own developed test methods are being investigated. One of the test methods and a spacer binding is further developed in the main study where focus lies on reproducibility of the tests, and variations of the spacer thread stitch length and placement. All of the samples from the main study is tested on the own developed test method and some chosen samples are tested on two standardized test methods: ISO 5085-­1:2004 and ISO 11092:2014 at the Swedish research institute Swerea IVF. A comparison is made between the results from the three methods.   The results show that tests with our own developed test method has not been able to show a clear relationship between heat insulation and the changes of parameters in different textiles. Although, the samples that have been tested indicate that there might be a relationship between high heat insulating properties when the spacer thread is knitting more frequently. When comparing the results from the three different test methods the own developed method show different raking from the two standardized methods. The own developed test method should therefore be further developed. But still, after discussion with Valter Dejke, researcher at Swerea IVF, and Sibel Okcabol, quality manager at Swerea IVF, it is believed that the own test method could be used for comparing thermal insulating properties between textiles.

The subject of this diploma thesis is a construction technology project prefabricated tennis hall with facilities in Prostejov. The content of this work are technical regulations, technical reports, project site equipment, design of mechanical assemblies, schedule, budget, monitoring and test plan, work safety and environmental protection.

This diploma thesis solves the construction technology project of the International Clinical Research Center of the St. Anne’s University Hospital, Brno (ICRC), namely the first stage of the construction of the buildings "B1" and "C1". It tries to design an ideal technological process of construction with respect of local conditions. Technologically it focuses mainly on the issue of special foundation, namely protection of excavation pit with secant pile wall and pile foundation. There are processed technological regulations, time and financial plans, construction budget, control and test plan, plan of heavy equipment and safety or environmental requirements. Everything is supplemented by attachments and drawing documentation.