This thesis solves new building multifunctional building in Brno in the form of documentation for construction. The work contains text, drawings and calculation part. The building is designed as a detached and located in a slightly sloping terrain. The new building is designed as a four-storey with basement and three floors. The facility is designed sixteen and four residential rental units. The structural system is a cross- walled ceramic fittings. Horizontal structures ceilings are made of precast filigree ceiling tiles with nadbetonovanou distribution plates. The roof is designed as a single-layer flat. Part of the main road in the building is designed passenger elevator. The work process basic assessment of building in terms of building physics and approximate calculation of the base area.

The theme of the diploma thesis is University dormitory in Olomouc. The aim of the diploma thesis is especially design of the project documentation for the building of University dormitory in Olomouc. The work includes drawings, text part and calculations. The building is designed as a detached object with six floors and one basement. The building is designed to accommodate university students and the accommodation capacity is 98 people. On the ground floor are designed offices, student club, laundry room and a bistro. In the basement are situated warehouses and technical rooms. The structural system is a monolithic reinforced concrete frame with masonry infill. The building is covered with a flat roof.

The final thesis „Kindergarten in Zubří“ is processed in the form design documentation for the construction. Kindergarten is designed for fifty children, part of the building is a large garden. It is a detached building with two floors. The surrounding terrain is slightly sloping. Kindergarten is located in a good walking distance from residential buildings in the town. The facility contains three class, the economic part, part of the leadership, part of the hobby activities, the public part. It is a masonry building based on the concrete strip foundations.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

The subject of my thesis is the design mountain guesthouse with a wellness centre, which is located in the village of Mala Morávka, at the level of documentation for construction. The new building is located in the cadastre unit Karlov pod Pradědem. This is a two floors, slab-building L-shaped with separate parking for visitors of boarding house and wellness centre. The structural system is composed of ceramic blocks Porotherm and reinforced concrete joist floor. Roof structure is made up of wooden trusses girders saddle shape. Design of mountain guesthouse with wellness centre respects the territorial plan of the village of Malá Morávka.

The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.

The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

This final thesis "Kindergarten Domino" was made as a project documentation for a building construction. The kindergarten is designed for 24 children. Kindergarden is designed as a detached building consists of two above-ground floors. Behind the building, there is a large garden, which is a part of the property. Building is situated on a sloping terrain in a walking distance from a residential area of Šlapanice. There are two operating units: technical part (managemant part) and activity unit. Kindergarten is planed as a masonry building, based on strip foundations.

Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.