1 |
Assessment Of Consumer Perceptions About Food Processing Technologies For Cooperative Extension Educational InitiativesArnold, Nicole Leanne 25 September 2019 (has links)
New food processing technologies are needed to create safe, high-quality food products that are still considered "fresh" by consumers. Despite the numerous benefits attributed to 'food processing', consumers continue to perceive the term negatively. Consumer acceptance of foods processed with different technologies generally increases when factual information is provided to the consumer. Educators working within Cooperative Extension are a resource for public dissemination of food information. By working directly in the community, Extension educators often cultivate positive relationships with local clientele. Therefore, Extension educators can dispel myths related to food processing technologies and deliver science-supported information to the general public. Consumer knowledge, perceptions, and purchasing intentions associated with both conventional and emerging food processing technologies were assessed through a nationwide telephone survey administered by Virginia Tech's Center for Survey Research Center. A similar version of the telephone survey was disseminated in an online format to Virginia Extension agents. An additional section of the online survey served as a needs assessment for educational materials related to food processing technologies. A grounded theory methodology was used for qualitative coding in both surveys. Approximately 67% of consumers expressed concerns towards the term "processed foods." The majority of Extension agents (67.4%) expressed concerns about foods that had been processed, citing additional ingredients, preservatives, and additives; safety; and health implications. Both the consumer and Extension agent groups were more likely to be supportive of light-exposed foods to enhance food safety and quality, in comparison to gas-exposed foods. Although agents may be familiar with some food processing technologies, they may not have the resources to understand the scientific mechanisms for which a technology is able to increase food safety. Consumer education regarding emerging technologies is necessary to anticipate potential consumer concerns; however, agents still lack resources and information about existing and frequently used food processing technologies. Educational interventions are needed to provide information to consumers and increase their acceptance of new and currently used processing technologies so that the food industry can effectively target emerging issues related to food. / Doctor of Philosophy
|
2 |
<b>Novel Applications of Microbubble Technology for Sustainable Food Processing</b>Yiwen Bao (8232060) 21 August 2024 (has links)
<p dir="ltr">Global food demand increases rapidly as a result of continuously growing population has raised severe concerns with food security. To overcome this critical challenge, food systems must be transformed to produce food with not only higher yield but also better nutritional quality. Therefore, food processing, as a critical step in food production chain that turn agricultural products into food, needs to be innovated through applications of cutting-edge technologies.</p><p dir="ltr">Microbubbles (MBs) are tiny gas-filled bubbles with distinctive physicochemical characteristics, including slow rising speed and long lifetime in liquid, large surface area per unit of gas volume, high internal pressure, high gas dissolution rate, hydrophobic and negatively charged surface and production of reactive oxygen species. Additionally, MB dispersion can enhance the heat and mass transfer properties of liquid. These features have led MBs to numerous applications in the fields of disease treatment, anaerobic digestion, and wastewater treatment, however, their applications in food processing have not thoroughly explored.</p><p dir="ltr">In this dissertation, MB technology was applied to different unit operations of food processing, including freezing, concentration and extraction, and the effects of MBs on process efficiency and food product quality were comprehensively studied. In the first study, MB-infused freezing medium was used for grape tomato immersion freezing. MBs markedly reduced the drip loss of tomato by 13.7–17.0% and improved its firmness, which were correlated to the accelerated nucleation process and formation of small ice crystals during freezing. The impact of MBs on water evaporation during apple juice concentration was investigated in the second study. MBs dramatically enhanced water evaporation, and concentration at bubble gas temperature of 40 °C and juice temperature of 70 °C showed the largest increase in the evaporation rate, by 104%. Moreover, although air-MBs showed an oxidation effect on both frozen tomato and concentrated juice, N<sub>2</sub>-MBs were found to be an ideal alternative which much better preserved the nutritional values of processed foods. Lastly, MBs and cold plasma-MBs were incorporated into citric acid solution for extracting pectin from apple pomace. MBs present in extracting solvent increased the extraction yield by 18–21%, and extraction with plasma-MBs showed even higher yields by up to 30%. Additionally, MB and cold plasma-assisted extraction were found more effective in extracting complex RG-I pectin.</p><p dir="ltr">This dissertation develops various approaches to incorporating MBs into conventional unit operations and enhancing their performance. With these novel applications explored, MB technology will not only increase the productivity but also reduce the energy, water and chemical use of food processing. Ultimately, MB-assisted processes are expected to play an important role in improving the sustainability of the food industry.</p>
|
3 |
Pressure assisted thermal sterilization: a novel means of processing foodsWimalaratne, Sajith Kanchana January 2009 (has links)
This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.
|
4 |
Pressure assisted thermal sterilization: a novel means of processing foodsWimalaratne, Sajith Kanchana January 2009 (has links)
This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.
|
5 |
Pressure assisted thermal sterilization: a novel means of processing foodsWimalaratne, Sajith Kanchana January 2009 (has links)
This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.
|
6 |
Pressure assisted thermal sterilization: a novel means of processing foodsWimalaratne, Sajith Kanchana January 2009 (has links)
This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.
|
Page generated in 0.1464 seconds