Spelling suggestions: "subject:"freestanding fim"" "subject:"freekstanding fim""
1 |
Membranes auto-supportées et nanocomposites à base de films multicouches de polyélectrolytes / Free-standing films and nanocomposites based on pH-amplified polyelectrolyte multilayer filmsShen, Liyan 07 March 2012 (has links)
La technique d'auto-assemblage couche par couche de polyélectrolytes, permettant de construire des films appelés « multicouches », s'est grandement développée au cours des deux dernières décennies. Cette technique permet non seulement de modifier des surfaces de matériaux mais également d'élaborer des membranes auto-supportées. Dans cette thèse, j'ai étudié la croissance de deux systèmes multicouches assemblés dans des conditions extrêmes de pH pour accélérer leur croissance. Les films à base de poly(ethylene imine) et d'acide poly(acrylique) ont été utilisés pour réaliser, d'une part, des membranes possédant une capacité à répondre à l'humidité, et d'autre part, des membranes asymétriques présentant des propriétés anti-bactériennes. Les films à base de poly(L-lysine) et de hyaluronane ont été réalisé par croissance amplifiée par le pH, et l'effet du poids moléculaire du HA sur la croissance et les propriétés interne des films a été étudié. Ces films ont servi de réservoir pour le piégeage de précurseurs métalliques, qui ont ensuite été réduit in situ par irradiation UV, afin de former des nanoparticules. Ainsi, des films nanocomposites contenant des particules d'argent et des particules d'or ont été synthétisés. / Layer-by-layer assembly has witnessed great development during the two last decades and has expanded its application from surface modification to membrane construction. In this thesis, I studied the buildup of layer-by-layer films assembled at extreme pH (i.e. pH-amplified). I first focused on the fabrication of free-standing film made of poly(ethylene imine) and poly(acrylic acid). An application was to use these films as humidity sensors and a second one was to load silver ions in the films to create anti-bacterial membranes. Then, I worked on poly(L-lysine)/hyaluronan films and I investigated the effect of HA molecular weight on film growth and internal properties. Finally, nanocomposites were made via in situ synthesis of metal NPs in (PLL/HA) films: silver NP loaded (PLL/HA) free-standing films were constructed and their mechanical properties were tested; well dispersed gold NPs with sizes ranging from ~2 nm to ~9 nm were synthesized in (PLL/HA) films.
|
2 |
HIGHLY CONDUCTIVE SOLID POLYMER ELECTROLYTE CONTAINING LiBOB AT ROOM TEMPERATURE FOR ALL SOLID STATE BATTERYLi, Si January 2017 (has links)
No description available.
|
3 |
Textures à la surface libre de cristaux liquides smectiques : étude en géométrie films librement suspendus et sur substrats structurés / Textures at the free surface of smectic liquid crystals : investigations in free standing films and on patterned solid substratesSelmi, Mayada 03 July 2018 (has links)
Ces travaux concernent l’étude expérimentale des textures se développant dans les ménisques de films smectiques de cristaux liquides thermotropes. Ces fluides complexes nous servent de système modèle pour l’étude des couplages élasto-capillaires qui se manifestent dans certaines conditions par des déformations périodiques de l’interface cristal liquide-air. Dans un premier temps, à partir de l’étude détaillée de la topographie de l’interface par une méthode interférométrique, nous caractérisons les différents types de structures, puis, identifions les principaux paramètres impliqués dans le processus d'apparition des défauts dans le ménisque de films libres suspendus. Ces résultats nous servent de base pour discuter des mécanismes physiques qui génèrent les différents types de défauts observés. Nous regardons en particulier, comment la diminution d’épaisseur de couche associée à une transition de phase va induire une instabilité mécanique responsable de l’apparition des ondulations de l’interface. Dans un deuxième temps, afin d’aller plus loin dans la compréhension des mécanismes, nous avons utilisé des films minces de cristaux liquides déposés sur des substrats solides microstructurés par des plots fabriqués par des techniques photolitographiques. Une telle géométrie permet de générer un ménisque autour de chaque plot et surtout de faire varier un plus grand nombre de paramètres comme par exemple l’ancrage sur le substrat via un traitement chimique de surface. L’ensemble de nos résultats apportent un éclairage nouveau sur la caractérisation et la compréhension des déformations spécifiques aux ménisques de fluides complexes. / The present work is an experimental study of the textures that appear in the meniscus of free standing smectic films with thermotropic liquid crystals. These complex fluids serve as model systems to investigate elasto-capillary phenomena which, under certain conditions, manifest themselves through periodic deformations of the liquid crystalair interface. In the first part of the thesis, we focus our attention on meniscus structures whose interfacial topographies are thoroughly characterized thanks to an in-house optical interferometry technique. Our study allows us to identify the main parameters involved in the development of meniscus structures and to discuss the physical mechanisms that are likely to be responsible for their formation. In particular, we show how a phase transition-induced layer shrinkage triggers a mechanical instability leading to interfacial undulations of the smectic free surface. In the second part of the manuscript, we address the case of thin liquid crystal films deposited on solid patterned solid substrates. The latter consist of regular arrays of microposts fabricated through photolithographic techniques. Such a geometry allows a meniscus to be formed around each micropost and makes it possible to examine the influence of other parameters such as the anchoring conditions on the solid substrate. The results gathered so far are able to shed some light on the characterization and the understanding of the specific deformations and textures that appear in the menisci of complex fluids.
|
4 |
Step-growth polymerization of perfluoro-vinyl ether, -cycloalkenes, and -acyclic alkenes with bisphenols containing variable polycyclic aromatic coresMukeba, Karl Mpumbwa 13 May 2022 (has links) (PDF)
This dissertation reports the synthesis and characterization of semi-fluorinated polymers derived from the polymerization of bisphenols with fluoroalkenes. A series of diverse bisphenols were chosen from popular commercial bisphenols and new polycyclic aromatic hydrocarbon (PAH) derived bisphenols requiring synthesis. Step-growth condensation polymerization of bisphenols with three different fluoroalkene types was performed while probing polymerization conditions and the structure/properties relationship of the resulting fluoropolymers. The fluoroalkene monomers were chosen from bis(trifluorovinyloxy)biphenyl (TFVE), perfluorocyclohexene (PFCH), and perfluoro acyclic monomers, namely, perfluoro(4-methyl-2-pentene) and 1-perfluoroheptene to undergo this chemistry.
This work is divided into four parts based on the polymerization methodology.
The first section focuses on the development of a new class of fluorinated arylene vinylene ether (FAVE) and their chain extended polymers prepared via base-catalyzed step-growth polymerization of PAH bisphenols with the TFVE monomer. These reactions afforded polymers containing controlled terminal and enchained fluoroalkenylenes for latent reactivity such as post polymerization functionalization, chain extension, and/or crosslinking. In general, these PAH cores resulted in polymers with improved thermal properties
The second portion describes the investigation of step-growth addition/elimination polymerizations of PAH bisphenols and PFCH to prepare a new class of fluoropolymers containing alternating rigid PAH linkages and enchained PFCH vinylene ether moieties in the backbone.
The third section covers the preparation and characterization of semi-fluorinated poly(aryl ether sulfone)s by nucleophilic addition/elimination reactions of PFCH with sulfone bisphenols. From commercially bisphenols combined with PAH bisphenols, we introduced the industrially valuable and property enhancing diaryl sulfone unit in a series of semi-fluorinated copolymers. This modular approach greatly expands access to partially fluorinated aryl ether sulfone polymers intended for high performance applications in optoelectronics, separation/purification membranes, and composites.
Finally, in the fourth section, a new class of semifluorinated polymers was synthesized via nucleophilic addition/elimination reactions of acyclic perfluoroalkenes with bisphenols. In particular, environmental concerns for biopersistent and highly regulated perfluorooctanoic acid (PFOA) is the driver for using perfluoroheptene, which is derived cleanly by the decarboxylation of these pollutants in one step. This provided a new class of semi-fluorinated materials with promising properties including thermal stable, processability, and transparent film formation.
|
Page generated in 0.081 seconds