This thesis is focused on two main areas of organic synthesis, palladium-catalyzed functionalization of alkenes and allylic alcohols, as well as development of new allylboration reactions. We have developed a palladium-catalyzed selective allylic trifluoroacetoxylation reaction based on C−H functionalization. Allylic trifluoroacetates were synthesized from functionalized olefins under oxidative conditions. The reactions proceed under mild conditions with a high level of diastereoselectivity. Mechanistic studies of the allylic C−H trifluoroacetoxylation indicate that the reaction proceeds via (η3-allyl)palladium(IV) intermediate. Palladium-catalyzed regio- and stereoselective synthesis of allylboronic acids from allylic alcohols has been demonstrated. Diboronic acid B2(OH)4 was used as the boron source in this process. The reactivity of the allylboronic acids were studied in three types of allylboration reactions: allylboration of ketones, imines and acyl hydrazones. All three processes are conducted under mild conditions without any additives. The reactions proceeded with remarkably high regio- and stereoselectivity. An asymmetric version of the allylboration of ketones was also developed. In this process chiral BINOL derivatives were used as catalysts. The reaction using γ-disubstituted allylboronic acids and various aromatic and aliphatic ketones afforded homoallylic alcohols bearing two adjacent quaternary stereocenters with excellent regio-, diastereo- and enantioselectivity (up to 97:3 er) in high yield. The stereoselectivity in the allylboration reactions could be rationalized on the basis of the Zimmerman-Traxler TS model.

No description available.

No description available.

Electrospun, non-woven, fibers have high surface area compared to conventional cast films. The thesis reports on the modification of electrospun fibers to concentrate and/or detect biohazards. In one study, electrospun fibers with affinity for the lectins ricin/concanavalin A were fabricated using molecular imprinting or through binding to immobilized antibodies, aptamers or lectin specific sugars. Attempts to fabricate imprinted electrospun fibers through inclusion of the template during the spinning process proved unsuccessful. However, electrospun fibers with affinity towards biohazards were successfully produced by post-modification with antibodies, aptamers or lectin specific saccharides. With regards to the latter, dextran, mannose and chitosan were immobilized onto nylon electrospun fibers that were partially hydrolyzed or treated with cyanuric chloride. The sugar-modified fibers bound significantly higher amount of lectins. Electrospun fibers were also fabricated, post modified with antibodies to capture and detect Salmonella. The study has illustrated the utility of electrospun fibers for biohazard diagnostics. / The National Center for Food Protection and Defense. USA

<p>South Africa s coal and platinum mineral resources are crucial resources towards creating an alternative and environmentally sustainable energy system. The beneficiation of these natural resources can help to enhance a sustainable and effective clean energy base infrastructure and further promote their exploration and exportation for economics gains. By diversification of these resources, coal and the platinum group metals (PGMs) especially palladium market can be further harnessed in the foreseeable future hence SA energy security can be guaranteed from the technological point of view. The South Africa power industry is a critical sector, and has served as a major platform in the South African socio-economic development. This sector has also been identified as a route towards an independent energy base, with global relevance through the development of membrane technologies to effectively and economically separate and purify hydrogen from the gas mixtures released during coal gasification. The South Africa power industry is a critical sector, and has served as a major platform in the SA&rsquo / s socio-economic development. This sector has also been identified as a route towards an independent energy base, with global relevance through the development of membrane technologies to effectively and economically separate and purify hydrogen from the gas mixtures released during coal gasification. Coal gasification is considered as a source of hydrogen gas and the effluent gases released during this process include hydrogen sulphide, oxides of carbon and nitrogen, hydrogen and other particulates. In developing an alternative hydrogen gas separating method, composite membrane based on organic-inorganic system is being considered since the other available methods of hydrogen separation are relatively expensive.<br /> &nbsp / </p>

No description available.

Mesoporous silica materials are versatile platforms for biological catalysis, isolation of small molecules for detection and separation applications. The design of mesoporous silica supports for tailored protein and biomolecule interactions has been limited by the techniques to demonstrate biomolecule location and functionality as a function of pore size. This work examines the interaction of proteins and lipid bilayers with engineered porous silica surfaces using spherical silica particles with tunable pore diameters (3 – 12 nm) in the range relevant to biomolecule uptake in the pores, and large particle sizes (5 - 15 µm) amenable to microscopy imaging The differentiation of protein location between the external surface and within the pore, important to applications requiring protein protection or catalytic activity in pores, is demonstrated. A protease / fluorescent protein system is used to investigate protein location and protection as a function of pore size, indicating a narrow pore size range capable of protein protection, slightly larger than the protein of interest and approaching the protease dimensions. Selective functionalization, in this case exterior-only surface functionalization of mesoporous particles with amines, is extended to larger pore silica materials. A reaction time dependent functionalization approach is demonstrated as the first visually confirmed, selective amine functionalization method in protein accessible supports. Mesoporous silica nanoparticles are effective supports for lipid bilayer membranes and membrane associated proteins for separations and therapeutic delivery, although the role of support porosity on membrane fluidity is unknown. Transport properties of bilayers in lipid filled nanoparticles as a function of pore diameter and location in the particle are measured for the first time. Bilayer diffusivity increases with increasing pore size and is independent of bilayer location within the core, mid or cap of the particle, suggesting uniform long range bilayer mobility in lipid filled pores. Application of lipid bilayers on mesoporous silica was examined for membrane associated proteins A unique method to adhere functional proteins in lipid bilayers on mesoporous silica particles is established using vesicles derived from cell plasma membranes and their associated proteins. This method of membrane protein investigation retains proteins within native lipid membranes, stabilizing proteins for investigation on supports.

The viscoelastic relaxation dynamics of a series of poly(methyl methacrylate) [PMMA] based nanocomposites filled with carbon nanotubes have been studied using dynamic mechanical analysis and broadband dielectric spectroscopy. The networks were prepared using four methods: (i) melt mixing, (ii) solution processing, (iii) in-situ polymerization, and (iv) polymer grafting. Nanotube modifications included surface oxidation via acid exposure and surface functionalization for polymer grafting. The effect of variations in processing method and nanotube modification on glass transition temperature (Tg) and relaxation dynamics was investigated. The relaxation behavior of the nanocomposites was sensitive to processing method and nanotube functionalization. Nanotube loading (to 5 wt%) led to a progressive increase in rubbery modulus, with the increase more pronounced in the solution-processed samples owing to enhanced nanotube dispersion. In the case of the oxidized nanotubes, loading led to an increase in modulus, but also a systematic decrease in Tg of ~ 15°C with 3 wt% nanotubes. For in-situ polymerized (PMMA/MWNT-ox) nanocomposites, there was no readily discernable trend in Tg. Composites prepared via in-situ polymerization in the presence of methyl methacrylate functionalized tubes (i.e., polymer grafting) displayed a positive shift in Tg of nearly 20°C at 1 wt% loading. Investigation of the dielectric relaxation of the PMMA/MWNT composites indicated a percolation threshold between 0.3 and 0.4 wt% MWNT.

Graphene has great potential for energy storage and conversion applications due to its outstanding electrical conductivity, large surface area and chemical stability. However, the pristine graphene offers unsatisfactory performance as a result of several intrinsic limitations such as aggregation and inertness. The functionalization of graphene is considered as a powerful way to modify the physical and chemical properties of graphene, and improve the material performance, which unfortunately still being preliminary and need further knowledge on controllable functionalization methods and the structure-property relationships. This thesis aims to provide in-depth understanding on these aspects. We firstly explored oxygen-functionalized graphene for supercapacitor electrodes. A mild solvothermal method was developed for graphene preparation from the reduction of graphene oxide; the solvent-dependent reduction kinetics is an interesting finding in this method that could be attributed to the solvent-graphene oxide interactions. Using the solvothermal method, oxygen-functionalized graphene with controlled density of oxygen functional groups was prepared by tuning the reduction time. The oxygen-containing groups, primarily phenols and quinones, reduce the graphene aggregation, improve the wetting properties and introduce the pseudocapacitance. Consequently, excellent supercapacitive performance was achieved. Nitrogen-doped graphene was synthesized by the pyrolysis of graphene oxide with nitrogen-containing molecules and used as an electrocatalyst for oxygen reduction reactions. We achieved the structural control of the nitrogen-doped graphene, mainly the content of graphitic nitrogen, by manipulating the pyrolysis temperature and the structure of nitrogen-containing molecules; these experiments help understand the evolution of the bonding configurations of nitrogen dopants during pyrolysis. Superior catalytic activity of the prepared nitrogen-doped graphene was found, due to the enriched content of graphitic nitrogen that is most active for the oxygen reduction reaction. Moreover, we demonstrated a facile strategy of producing superhydrophobic octadecylamine-functionalized graphite oxide films. The long hydrocarbon chain in octadecylamine reduces the surface energy of the graphene oxide film, resulting in a high water contact angle and low hysteresis. The reaction mechanism and the effect of hydrocarbon chain length were systematically investigated. In addition to the researches on graphene-based materials, some results on advanced carbon nanomaterials and polymer composites for electronic packaging will also be discussed as appendix to the thesis. These include carbon nanotube-based capacitive deionizer and gas sensor, and hexagonal boron nitride-epoxy composites for high thermal conductivity underfill.

Part 1: Transition-metal-catalyzed direct transformations of aromatic C-H bonds are emerging as valuable tools in organic synthesis. These reactions are attractive because of they allow for inherently efficient construction of organic building blocks by minimizing the pre-activation of substrates. Of these processes, direct arylation has recently received much attention due to the importance of the biaryl core in medicinal and materials chemistry. Also, alkyne hydroarylation has garnered interest because it allows for the atom-economical synthesis of functionalized alkenes directly from simple arenes and alkynes. Described in this thesis are number of advancements in these areas. First, palladium catalyzed direct arylation of azine N-oxides using synthetically important aryl triflates is described. Interesting reactivity of aryl triflates compared to aryl bromides was uncovered and exploited in the synthesis of a compound that exhibits antimalarial and antimicrobial activity. Also reported is the efficient, direct arylation enabled (formal) synthesis of six thiophene based organic electronic materials in high yields using simple starting materials. Additionally, the site-selective direct arylation of both sp2 and sp3 sites on azine N-oxide substrates is described. The arylation reactions are carried out in either a divergent manner or a sequential manner and is applied to the synthesis of the natural products, Papaverine and Crykonisine. Mechanistic investigations point towards the intimate involvement of the base in the mechanism of these reactions. Next, the rhodium(III)-catalyzed hydroarylation of internal alkynes is described. Good yields are obtained for a variety of alkynes and arenes with excellent regioselectivity for unsymmetrically substituted alkynes. Mechanistic investigations suggest that this reaction proceeds through arene metalation with the cationic rhodium catalyst, which enables challenging intermolecular reactivity. Part 2: Access to single enantiomer compounds is a fundamental goal in organic chemistry and despite remarkable advances in enantioselective synthesis, their preparation remains a challenge. Kinetic resolution of racemic products is an important method to access enantioenriched compounds, especially when alternative methods are scarce. Described in this thesis is the resolution of tertiary and secondary alcohols, which arise from ketone and aldehyde aldol additions. The method is technically simple, easily scalable, and provides tertiary and secondary alcohols in high enantiomeric ratios. A rationale for the unique reactivity/selectivity associated with (1S,2R)-N-methylephedrine in the resolution is proposed. Organocatalysis is a rapidly developing, powerful field for the construction of enantioenriched organic molecules. Described here is a complimentary class of organocatalysis using simple aldehydes as temporary tethers to perform challenging formally intermolecular reactions at room temperature. This strategy allows for the enantioselective, intermolecular cope-type hydroamination of allylic amines with hydroxyl amines. Also, interesting catalytic reactivity for dichloromethane is revealed.