Spelling suggestions: "subject:"game arrays"" "subject:"gave arrays""
1 |
Implementation of a configurable fault tolerant processor (CFTP)Johnson, Steven A. 03 1900 (has links)
Approved for public release; distribution is unlimited / The space environment has unique hazards that force electronic systems designers to use different techniques to build their systems. Radiation can cause Single Event Upsets (SEUs) which can cause state changes in satellite systems. Mitigation techniques have been developed to either prevent or recover from these upsets when they occur. At the same time, modifying on-orbit systems is difficult in a hardwired electronic system. Finding an alternative to either working around a mistake or having to keep the same generation of technology for years is important to the space community. Newer programmable logic devices such as Field Programmable Gate Arrays (FPGAs) allow for emulation of complex logic circuits, such as microprocessors. FPGAs can be repro-grammed as necessary, to account for errors in design, or upgrades in software logic circuits. In an effort to provide one solution for both of these issues, this research was undertaken. The Configurable Fault Tolerant Processor (CFTP) emulates three identical processors, using Triple Modular Redundancy (TMR) to mitigate SEUs on a radiation tolerant FPGA. With the reconfigurable capabilities of FPGA technology, as newer processors can be emulated, these new configurations can be uploaded to the satellite as software code, thereby actually upgrading the processor in flight. This research used a 16-bit Reduced Instruction Set Computer (RISC) processor as its cores. This thesis describes how the Harvard architecture of the processor is interfaced with the Von Neumann architecture of the memory. It also develops the process by which errors are detected and corrected, as well as recorded. The end result is a design simulation ready for implementation on an FPGA. / Lieutenant, United States Navy
|
2 |
Novel reconfigurable computing architectures for embedded high performance signal processing and numerical applicationsOrtiz Gual, Fernando Enrique. January 2006 (has links)
Thesis (Ph.D.)--University of Delaware, 2006. / Principal faculty advisor: Dennis W. Prather, Dept. of Electrical and Computer Engineering. Includes bibliographical references.
|
3 |
Implementation of a configurable fault tolerant processor (CFTP) /Johnson, Steven A. January 2003 (has links) (PDF)
Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, March 2003. / Thesis advisor(s): Herschel H. Loomis, Alan A. Ross. Includes bibliographical references (p. 117). Also available online.
|
4 |
ArchSyn: an energy-efficient FPGA high-level synthesizerLin, Yu, Colin., 林郁. January 2012 (has links)
Due to their high potential performance and reduced energy and power consumption, field-programmable gate arrays (FPGAs) are widely used as accelerators for today’s computationally intensive applications. These applications use advanced algorithms more sophisticated than ever before. The high design complexity along with fast development process challenges the traditional FPGA design methodology using hardware description languages. High-level synthesis accelerates design implementation by raising the level of design abstraction beyond register transfer level. This dissertation work develops a highly energy-efficient FPGA high-level synthesis tool, ArchSyn, using an application-specific coarse-grain architecture as an intermediate synthesis step.
ArchSyn provides rapid and energy-efficient compilation of dataflow graphs (DFGs) on FPGAs by scheduling the dataflow operations on an array of directly connected simple configurable processing elements (CPEs). Each CPE in the array performs primitive compute operations according to a small local sequencer at each cycle. Data are communicated via multi-hop routing within the direct interconnect network. The scheduler schedules each compute operation of the DFG obtained from the high-level design to execute on a particular hardware CPE at a particular cycle. It also determines the communication schedule of the intermediate data among the producing and consuming CPEs, optionally buffering them with distributed memory along the path. As such, the lengthy process of synthesizing a full custom hardware design on FPGA is reduced to a scheduling and mapping process. By restricting the fine-grain programmability into a coarse grain processor network scheduling problem, the compilation time can be improved substantially, thereby improving the overall productivity of the designer.
Furthermore, taking advantage of the programmability of FPGAs, the effect of the array interconnect architecture on the energy-efficiency of the resulting system is studied. By altering the array configuration, the data communication scheme among the CPEs must also be changed. This has a net effect on both the energy consumption
spent on data movement as well as on the overall compute performance. It is shown that by using array topology that is customized to the input DFG, up to 28% improvement in energy-efficiency could be achieved. An exploratory framework based on a genetic algorithm was developed that allows us to obtain such application-specific connection network. Such degree of customization is possible only with the programmability of FPGAs. Moreover, such topology adaptation can be achieved rapidly as only routings between a fixed set of pre-placed CPEs are required.
Implementations using ArchSyn and an existing FPGA compilation tool xPilot were compared. ArchSyn gave a 2X better energy consumption and a 11X better energy-delay product for computation with very regular and simple data dependency. For computation with irregular data dependency, the energy consumption and energy-delay product improvement was 9.6X and 199X. / published_or_final_version / Electrical and Electronic Engineering / Doctoral / Doctor of Philosophy
|
5 |
Routing algorithms for field-programmable gate arraysLee, Seokjin 28 August 2008 (has links)
Not available / text
|
6 |
The functional memory approach to the design of custom computing machinesHalverson, Richard Peyton January 1994 (has links)
Thesis (Ph. D.)--University of Hawaii at Manoa, 1994. / Includes bibliographical references (leaves 185-186). / Microfiche. / xviii, 186 leaves, bound ill. 29 cm
|
7 |
Built-in self test of configurable memory resources in field programmable gate arraysMilton, Daniel, January 2007 (has links) (PDF)
Thesis (M.S.)--Auburn University, 2007. / Abstract. Vita. Includes bibliographic references (ℓ. 101-103)
|
8 |
Routing algorithms for field-programmable gate arraysLee, Seokjin, Wong, D. F., Fussell, Donald S., January 2003 (has links) (PDF)
Thesis (Ph. D.)--University of Texas at Austin, 2003. / Supervisors: Martin D. F. Wong and Donald S. Fussell. Vita. Includes bibliographical references. Available also from UMI Company.
|
9 |
Multi-FPGA systems /Hauck, Scott. January 1995 (has links)
Thesis (Ph. D.)--University of Washington, 1995. / Vita. Includes bibliographical references (p. [218]-230).
|
10 |
Single event upset testing of flash based field programmable gate arraysPotgieter, Juan-Pierre January 2015 (has links)
In the last 50 years microelectronics have advanced at an exponential rate, causing microelectronic devices to shrink, have very low operating voltages and increased complexities; all this has made circuits more sensitive to various kinds of failures. These trends allowed soft errors, which up until recently was just a concern for space application, to become a major source of system failures of electronic products. The aim of this research paper was to investigate different mitigation techniques that prevent these soft errors in a Video Graphics Array (VGA) controller which is commonly used in projecting images captured by cameras. This controller was implemented on a Flash Based Field Programmable Gate array (FPGA). A test set-up was designed and implemented at NRF iThemba LABS, which was used to conduct the experiments necessary to evaluate the effectiveness of different mitigation techniques. The set-up was capable of handling multiple Device Under Tests (DUT) and had the ability to change the angle of incidence of each DUT. The DUTs were radiated with a 66MeV proton beam while the monitoring equipment observed any errors that had occurred. The results obtained indicated that all the implemented mitigation techniques tested on the VGA system improved the system’s capability of mitigating Single Event Upsets (SEU). The most effective mitigation technique was the OR-AND Multiplexer Single Event Transient (SET) filter technique. It was thus shown that mitigation techniques are viable options to prevent SEU in a VGA controller. The permanent SEU testing set-up which was designed and manufactured and was used to conduct the experiments, proved to be a practical option for further microelectronics testing at iThemba LABS.
|
Page generated in 0.0399 seconds