1 |
Vlivy výrobních technologií na geometrickou a rozměrovou přesnost obrobků / Influences manufacturing technologies geometric and dimensional accuracy of workpiecesSuchomel, Kamil January 2017 (has links)
The aim of the diploma thesis is to describe influences of selected production technologies on geometrical and dimensional accuracy of workpieces. Specific technologies - turning, milling and grinding and the machines on which these technologies will be implemented - a vertical lathe, a portal milling machine and a center grinder are described in this thesis. Additionally a procedure is created for adding geometric errors to a tri-axial machine tool to describe the entire working area of the machine in terms of errors. Subsequently an analysis of each geometric error is created for each machine and their influence on the resulting workpiece is determined.
|
2 |
Mapování geometrických chyb v pracovním prostoru obráběcího stroje / Mapping geometry errors in the machine tool workspaceKnobloch, Josef January 2011 (has links)
Diploma thesis offers a new approach to the measuring of geometry errors in the machine tool workspace with the aid of laser tracker. There is a method of data acquisition and also the Matlab programs for data processing suggested in the thesis. This method can determine the accuracy and repeatibility of positioning and angular displacement of the numerical controlled axes of the measured machine tool and it compiles its mathematical model. All the gathered knowledge is used to evaluation of geometric accuracy of the virtual machined workpiece.
|
3 |
Uncertainty Analysis Of Coordinate Measuring Machine (cmm) MeasurementsSozak, Ahmet 01 September 2007 (has links) (PDF)
In this thesis, the measurement uncertainty of Coordinate Measuring Machine
(CMM) is analysed and software is designed to simulate this. Analysis begins with
the inspection of the measurement process and structure of the CMMs. After that,
error sources are defined with respect to their effects on the measurement and then an
error model is constructed to compensate these effects. In other words, systematic
part of geometric, kinematic and thermal errors are compensated with error
modelling. Kinematic and geometric error model is specific for the structure of
CMM under inspection. Also, a common orthogonal kinematic model is formed and
with using the laser error data of the CMM and error maps of the machine volume is
obtained. Afterwards, the models are compared with each other by taking the
difference and ratio.
The definition and compensation of the systematic errors leave the uncertainty
of measurements for analysing. Measurement uncertainty consists of the
uncompensated systematic errors and random errors. The other aim of the thesis is to
quantify these uncertainties with using the different methods and to inspect the
success of these methods. Uncertainty budgeting, comparison, statistical evaluation
by designing an experiments and simulation methods are examined and applied to
the CMM under inspection. In addition, Virtual CMM software is designed to simulate the task specific measurement uncertainty of circle, sphere and plane
without using the repeated measurements. Finally, the performance of the software, highly depending on the
mathematical modelling of machine volume, is tested by using actual measurements.
|
4 |
Error Calibration on Five-axis Machine Tools by Relative Displacement Measurement between Spindle and Work Table / 主軸・テーブル間の相対変位の測定に基づく5軸制御工作機械の誤差キャリブレーション法Hong, Cefu 26 March 2012 (has links)
Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第16841号 / 工博第3562号 / 新制||工||1538(附属図書館) / 29516 / 京都大学大学院工学研究科マイクロエンジニアリング専攻 / (主査)教授 松原 厚, 教授 松久 寛, 教授 西脇 眞二 / 学位規則第4条第1項該当
|
Page generated in 0.0508 seconds