This thesis deals with output power calibration of a mobile platform that supports EGPRS.Two different topics are examined. First some different measurement methods are compared concerning cost efficiency, accuracy, and speed and later measurements are carried out on a mobile platform. The output power from the mobile platform is controlled by three parameters and the influence on the output power when varying those parameters is investigated and presented. Furthermore, two methods of improving the speed of the calibration are presented. The first one aims to decrease the number of bursts to average over as much as possible. The conclusion is that 10-20 bursts are enough for GMSK modulation and about five bursts for 8PSK modulation. The purpose of the second investigation is to examine the possibility to measure the output power in one modulation and frequency band, and then calculate the output power in the other bands. The conclusion in this case is that, based on the units investigated, it is possible for some values of the parameters and in some frequency bands. However, more units need to be included in the basic data for decision-making and it is possible that the hardware variation is too large.

One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain.

One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain. / Higher Education Ministry

As the wireless telecommunications industry becomes more widely accepted, the need for mobile data communication has followed the rise in mobile voice communication. Cellular Digital Packet Data (CDPD) offers an unobtrusive data service that overlays the existing Advanced Mobile Phone Service (AMPS) in a cost effective manner that will be attractive to most service providers. Using idle time between voice traffic, CDPD uses Gaussian Minimum Shift Keying (GMSK) to send bursts of Reed-Solomon encoded information while channel hopping to avoid interfering with voice transmissions. This thesis assesses the performance of CDPD for different channel environments through simulation. Specifically, Gaussian noise, Rayleigh fading, co-channel interference models are incorporated to identify the performance of the system. / Master of Science

International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California / FQPSK is the abbreviation for Feher Quadrature Phase Shift Keying (FQPSK) patented systems [1]. Digcom, Inc. licensed FQPSK products demonstrated significant spectral saving and RF power efficient robust BER performance advantages. These bit rate agile modems and Non Linearly Amplified (NLA) transceivers, DSP and hardware implementations, and in some instances “software-radios” (20kb/s to more than 100Mb/s) and RF frequency agile (from 150MHz to more than 40GHz) developments and systems have recently been demonstrated and deployed. The spectral efficiency, i.e., data throughput capability of the 1st generation of FQPSK, as demonstrated in initial Advanced Range Telemetry (ARTM) flight tests, approximately doubles while 2nd generation “FQPSK-2” systems have the potential to quadruple the spectral efficiency of operational PCM/FM telemetry systems and be backward compatible with the 1st generation of FQPSK technologies. It is also demonstrated that the spectral efficiency advantage of FQPSK over that of NLA power efficient GMSK, OQPSK and QPSK modulated transceivers is in the 50% to 300% range and that the potential spectral efficiency advantage of FQPSK-2 over GMSK [1] is in the 200% to 500% range. Based on extensive multi-year studies of alternative solutions for spectral and RF power efficient, robust BER performance systems, several commercial US and international organizations, AIAA, CCSDS, NASA, ESA, CCSDS and various programs of the US Department of Defense (DoD) concluded that FQPSK offers the most spectrally efficient high performance-high speed proven technology solutions and recommended FQPSK standardization for several data links. Initial DoD-ARTM Program Office Air-to-Ground L-band and S-band jet airborne telemetry Test and Evaluation (T&E) data, obtained during the summer of 1998 are briefly highlighted. These include simultaneosly tested FQPSK and PCM/FM. In these tests the following ARTM objectives have been demonstrated: (a) FQPSK approximately doubles the spectral efficiency of currently operational PCM/FM; (b) The Data Link Performance of these two systems is comparable. The American Institute of Aeronautics and Astronautics (AIAA) draft modulation standard recommended to the DoD, NASA and CCSDS, was approved by the AIAA [23]. The AIAA standard recommends “that FQPSK modulation be immediately adopted as the interim increment–1 standard.”

The GSM platform is a extremely successful wireless technology and an unprecedented story of global achievement. The GSM platform is growing and evolving and offers an expanded and feature-rich voice and data enabling services. General Packet Radio Service, (GPRS), will have a tremendous transmission rate, which will make a significant impact on most of the existing services. Additionally, GPRS stands ready for the introduction of new services as operators and users, both business and private, appreciate the capabilities and potential that GPRS provides. Services such as the Internet, videoconferencing and on-line shopping will be as smooth as talking on the phone. Moreover, the capability and ease of access to these services increase at work, at home or during travel. In this research the traffic channel of a GSM system was studied in detail and simulated in order to obtain a performance analysis. Matlab, software from Mathworks, was used for the simulation. Both the forward and the reverse links of a GSM system were simulated. A flat fading model was used to model the channel. Signal to Noise Ratio, (SNR), was the primary metric that was varied during the simulation. All the building blocks for a traffic channel, including a Convolutional encoder, an Interleaver and a Modulator were coded in Matlab. Finally the GPRS system, which is an enhancement of the GSM system for data services was introduced.

Title from PDF of title page. / Document formatted into pages; contains 62 pages / Thesis (M.S.E.E.)--University of South Florida, 2003. / Includes bibliographical references. / Text (Electronic thesis) in PDF format. / ABSTRACT: The GSM platform is a extremely successful wireless technology and an unprecedented story of global achievement. The GSM platform is growing and evolving and offers an expanded and feature-rich voice and data enabling services. General Packet Radio Service, (GPRS), will have a tremendous transmission rate, which will make a significant impact on most of the existing services. Additionally, GPRS stands ready for the introduction of new services as operators and users, both business and private, appreciate the capabilities and potential that GPRS provides. Services such as the Internet, videoconferencing and on-line shopping will be as smooth as talking on the phone. Moreover, the capability and ease of access to these services increase at work, at home or during travel. In this research the traffic channel of a GSM system was studied in detail and simulated in order to obtain a performance analysis. Matlab, software from Mathworks, was used for the simulation. / ABSTRACT: Both the forward and the reverse links of a GSM system were simulated. A flat fading model was used to model the channel. Signal to Noise Ratio, (SNR), was the primary metric that was varied during the simulation. All the building blocks for a traffic channel, including a Convolutional encoder, an Interleaver and a Modulator were coded in Matlab. Finally the GPRS system, which is an enhancement of the GSM system for data services was introduced. / System requirements: World Wide Web browser and PDF reader. / Mode of access: World Wide Web.

No description available.

In this thesis, symbol timing recovery based on matched filtering in Gaussian Minimum Shift Keying (GMSK) with bandwidth-bit period product (BT) of 0.3 is investigated. GMSK is the standard modulation type for GSM. Although GMSK modulation is non-linear, it is approximated to Offset Quadrature Amplitude Modulation (OQAM), which is a linear modulation, so that Maximum Likelihood Sequence Estimation (MLSE) method is possible in the receiver part. In this study Typical Urban (TU) channel model developed in COST 207 is used. Two methods are developed on the construction of the matched filter. In order to obtain timing recovery for GMSK signals, these methods are investigated. The fractional time delays are acquired by using interpolation and an iterative maximum search process. The performance of the proposed symbol timing recovery (STR) scheme is assessed by using computer simulations. It is observed that the STR tracks the variations of the frequency selective multipath fading channels almost the same as the Mazo criterion.

No description available.