Structural studies of peptides are of great importance in developing novel and effective biomaterials ranging from drugs and vaccines to nano materials with industrial applications. In addition, they provide model systems to study and mimic the protein conformations. The ability to generate folded intramolecularly hydrogen bonded structures in short peptides is essential for peptide design strategies, which rely on the use of folding nuclei in the construction of secondary structure modules like helices and β-hairpins. In these approaches, conformational choices at selected positions are biased, using local stereochemical constraints, that limit the range of accessible backbone torsion angles. X-ray crystallographic studies of designed peptides provide definitive proof of the success of a design strategy, and provide essential structural information that can be utilized in the future design of biologically and structurally important polypeptides. Recent trends in peptide research focus on the incorporation of β-, γ- and higher homologs of the α-amino acid residues in designed peptides as they confer more proteolytic stability to the polypeptides. X-ray crystallographic studies of such modified peptides containing non-protein residues are essential, since information on the geometric and stereochemical properties of modified amino acids can only be gathered from the systematic structural studies of synthetic peptides incorporating them. This thesis reports a systematic study of the structures and conformations of amino acid derivatives and designed peptides containing stereochemically constrained α-, β- and γ-amino acid residues and the structural studies of polymorphic peptide helices. The structures described in thesis contain the Cα,α-dialkyalted α-residues α-aminoisobutyric acid (Aib) and 1-aminocyclohexane-1-carboxylic acid (Ac6c), the β-amino acid residue 1-aminocyclohexane acetic acid (β3,3Ac6c) and the γ-amino acid residue 1-aminomethylcyclohexaneacetic acid (gabapentin, Gpn). The crystal structure determination of peptides incorporating conformationally constrained α-, β- and γ- amino acid residues permitted the characterization of new types of hydrogen bonded turns and polymorphs. The studies enabled the precise determination of conformational and geometric parameters of two ω-amino acid residues, gabapentin and β 3,3Ac6c and provided detailed information about the conformational excursions possible for peptide molecules. This thesis is divided into 10 chapters. Chapter 1 gives a general introduction to the stereochemistry of the polypeptide chain, description of backbone torsion angles of α- and ω- amino acid residues and the major secondary structures of α-peptides, β-peptides, γ-peptides and hybrid peptides. A brief introduction to polymorphism and weak interactions, in particular aromatic interactions, is also provided, followed by a discussion on X-ray diffraction and solution to the phase problem. Chapter 2 describes the crystal structures of gabapentin zwitterion and its eight derivatives (Ananda, Aravinda, Vasudev et al., 2003). The crystal structure of the gabapentin zwitterions determined in this study is identical to that previously reported (Ibers, J. A. Acta Crystallogr. 2001, C57, 641-643). Eight of the nine achiral compounds crystallized in centrosymmetric space groups P21/c, C2/c or Pbca, while one derivative (Tos-Gpn-OH) crystallized in non-centrosymmetric space group Pna21 with four independent molecules in the asymmetric unit.The structural studies presented in this chapter reveal that the geminal substituents on the Cβ atom limits the values of dihedral angles θ1 and θ2 to ±60°, resulting in folded backbone conformations in all the examples. Intramolecular hydrogen bonds with 7-atoms in the hydrogen bond turn (C7) are observed in three derivatives, gabapentin hydrochloride (GPNCL), Boc-Gpn-OH (BGPNH) and Piv-Gpn-OH (PIVGPN), while a 9-atom hydrogen bonded turn (C9) is observed in Ac-Gpn-OH (ACGPH). Unique structural features, such as an unusual anti conformation of the COOH group (in ACGPH) and positional disorder of the cyclohexane ring (in BGPNN), indicating the co-existence of both the interconvertible chair conformations, are revealed by the crystal structure analyses. Chapter 3 describes the structural characterization of novel hydrogen bonded conformations of homo oligomers of Gpn. The crystal structures of three peptides, Boc-Gpn-Gpn-NHMe (GPN2), Boc-Gpn-Gpn-Leu-OMe (GPN2L) and Boc-Gpn-Gpn-Gpn-Gpn-NHMe (GPN4) provide the first crystallographic characterization of two new families of polypeptide structures, the C9 helices and C9 ribbons (Vasudev et al., 2005, 2007), in which the molecular conformations are stabilized by contiguous C9 turns formed by the hydrogen bonding between the CO group of residue (i) and the NH group of residue (i+2). The C9 hydrogen bond is characterized by a specific combination of the four torsion angles for the Gpn backbone, with the torsion angles θ1 and θ2 adopting g+/g+ or g /g- conformations. The structural analysis also permits precise determination of hydrogen bond geometry for the C9 structures, which is highly linear in contrast to the analogous γ-turn hydrogen bonds in α-peptides. A comparison of the backbone conformations in the three peptides reveals two classes of C9 hydrogen bonded secondary structures, namely C9 helices and C9 ribbons. The packing arrangement in these γ-peptides follows the same patterns as the helix packing in crystals of α-peptides. Chapter 4 describes ten crystal structures of short hybrid peptides containing the Gpn residue (Vasudev et al., 2007). In addition to the C7 and C9 hydrogen bonded turns which are defined by the backbone conformations at the Gpn residue, hybrid turns defined by a combination of backbone conformations at the α and γ-residues or at the β and γ-residues have been determined. Peptides Boc-Ac6c-Gpn-OH (ACGPH), Piv-Pro-Gpn-Val-OMe (PPGPV) and Boc-Val-Pro-Gpn-OH (VPGPH) reveal molecular conformation stabilized by intramolecular C9 hydrogen bonds, while Boc-Ac6c-Gpn-OMe (ACGPO) and Boc-Gpn-Aib-OH (GPUH) are stabilized by a C7 hydrogen bonded turn at the Gpn residue. An αγ hybrid turn with 12 atoms in the intramolecular hydrogen bonded rings (C12 turns) has been observed in the tripeptide Boc-Ac6c-Gpn-Ac6c-OMe (ACGP3), while βγ hybrid turns with 13 atoms in the hydrogen bonded ring (C13 turns) have been characterized in the tripeptides Boc-βLeu-Gpn-Val-OMe (BLGPV) and Boc- βPhe-Gpn-Phe-OMe (BFGPF). The two βγ C13 turns belong to two different categories and are characterized by different sets of backbone torsion angles for the β and γ residues. A γα C10 hydrogen bond, which is formed in the N→C direction (NHi ••• COi+2), as opposed to the regular hydrogen bonded helices of α-peptides, has also been observed in BFGPF. The Chapter provides a comparison of the backbone torsion angles of the Gpn residue in various hydrogen bonded turns and a brief comparison of the observed hydrogen bonded turns with those of the α-peptides. Chapter 5 describes the crystal structures of three αγ hybrid peptides which show C12/C10 mixed hydrogen bond patterns (Vasudev et al., 2007, 2008a; Chatterjee, Vasudev et al.,2008a). The insertion of gabapentin in the predominantly α-amino acid sequences in Boc-Ala-Aib-Gpn-Aib-Ala-OMe (AUGP5) and Boc-Leu-Gpn-Aib-Leu-Gpn-Aib-OMe results in the observation of helices stabilized by αα C10 (310-turn) and αγ C12 turns. The tetrapeptide Boc-Leu-Gpn-Leu-Aib-OMe reveals a novel conformation, stabilized by C12 (αγ) and C10 (γα) hydrogen bonds of opposite hydrogen bond directionalities. The conformations observed in crystals have been extended to generate C12 helix and C12/C10 helix with alternating hydrogen bond polarities in ( αγ)n sequences. The structure determination of three crystals, providing five molecular conformations, presented in this chapter provides the first crystallographic characterization of two types of helices predicted for the regular αγ hybrid peptides from theoretical calculations. The crystal structure of Boc-Ala-Aib-Gpn-Aib-Ala-OMe also provides an example for the co-existence of left-handed and right-handed helix in the asymmetric unit. Chapter 6 describes the structural studies of αγ hybrid peptides containing Aib and Gpn residues, and is divided into two parts. The first part presents the crystal structure analysis of peptides of sequence length 2 to 4, with alternating Aib and Gpn residues, and illustrates the conformational variability in αγ hybrid sequences as evidenced by the observation of conformational polymorphs (Chatterjee, Vasudev et al., 2008b; Vasudev et al., 2007; Ananda, Vasudev et al., 2005). The peptide Boc-Gpn-Aib-NHMe (GUN), Boc-Aib-Gpn-Aib-OMe (UGU), Boc-Gpn-Aib-Gpn-Aib-OMe (GU4O), Boc-Aib-Gpn-Aib-Gpn-OMe (UG4O) and Boc-Aib-Gpn-Aib-Gpn-NHMe (UG4N), all of which are potential candidates for exhibiting αγ C12 hydrogen bonds, reveal molecular conformations stabilized by diverse hydrogen bonded turns such as C7, C9, C12 and C17 in crystals. The conformational heterogeneity in this class of hybrid peptides is further evidenced by the observation of three polymorphs in the monoclinic space group P21/c for the tetrapeptide Boc-Aib-Gpn-Aib-Gpn-NHMe (UG4N), providing four independent peptide molecules adopting two distinct backbone conformations. In one polymorph, C12 helices terminated with an unusual three residue ( γαγ) C17 turn is observed, while the unfolding of helical conformation by solvent insertion into the backbone is observed in the other two polymorphs. The studies indicate the possible utility of Gpn residue in stabilizing locally folded conformations in the folding pathway, thus permitting their crystallographic characterization in multiple crystal forms. A discussion of the structural and conformational features of Gpn residues determined from all the crystal structures is presented in the Chapter, along with a φ-ψ plot for the Gpn residue. Part 2 of Chapter 6 describes the crystal structures of two octapeptides, Boc-Gpn-Aib-Gpn-Aib-Gpn-Aib-Gpn-Aib-OMe (GU8) and Boc-Leu-Phe-Val-Aib-Gpn-Leu-Phe-Val-OMe (LFVUG8), featuring C12 turns at the Aib-Gpn segments (Chatterjee, Vasudev et al., 2009). GU8 folds into a C12 helix flanked by C9 hydrogen bonds at both the termini, while LFVUG8 adopts β-hairpin conformation with a chain-reversing C12 turn at the central Aib-Gpn segment. A remarkable feature of the Aib-Gpn turn in the β-hairpin structure is the anti conformation about the Cβ-Cα (θ2) bond, which is the only example of a Gpn residue not adopting gauche conformation for both θ1 and θ2. The crystal structures of the two peptides, mimicking the two major secondary structural elements of α-peptides in hybrid polypeptides, permits a comparative study of the mode of molecular packing in crystals of α-peptides and hybrid peptides. The chapter also discusses theoretical calculations on αγ hybrid sequences, which reveal new types of C12 hydrogen bonded turns. Chapter 7 describes the crystal structures of conformationally biased tert-butyl derivatives of Gpn. The crystallographic characterization of the E (trans) and Z (cis) isomers of the residue,three protected derivatives and a tripeptide provides examples of C7 and C9 hydrogen bonded conformations, suggesting that the C7 and C9 hydrogen bonds can be formed by Gpn residues with both the chair conformations of the cyclohexane ring. Chapter 8 describes the systematic structural studies of the derivatives and peptides of the stereochemically constrained β- amino acid residue, β3,3Ac6c (Vasudev et al., 2008c). The backbone torsion angles φ and θ adopt gauche conformation in majority of the examples, owing to the presence of a cyclohexane ring on the Cβ atom. In contrast to Gpn, β3,3Ac6c does not show strong preference for adopting intramolecularly hydrogen bonded conformations. Of the 16 crystal structures determined, intramolecular hydrogen bonds involving the β-residue are observed only in 4 cases. The amino acid zwitterion (BAC6C), the hydrochloride (BACHCL) and the dipeptide Boc-β3,3Ac6c-β3,3Ac6c-NHMe (BAC62N) form N-H•••O hydrogen bonds with 6-atoms in the hydrogen bond ring (C6 turns). An αβ hybrid C11 hydrogen bonded turn is characterized in the dipeptide Piv-Pro-β3,3Ac6c-NHMe, which is distinctly different from the C11 hydrogen bonds observed in αβ hybrid peptide helices. Several unique structural features such as a dynamic disorder of the hydrogen atom of the carboxylic acid group (in BBAC) and cis geometry of the urethane bond (in BBAC, BAC62N and BPBAC) have been observed in this study. A comparison of the backbone conformations of β3,3Ac6c with other β- amino acid residues is also provided. Chapter 9 describes the crystallographic characterization of a new polymorph of gabapentin monohydrate and crystal structures of the zwitterions of E and Z isomers of tert-butylgabapentin and its hydrochloride and hydrobromide (Vasudev et al., 2009). A comparison of the crystal structures of the monoclinic form (Ibers, J. A. Acta Crystallogr. 2001, C57, 641-643) of gabapentin monohydrate and the newly characterized orthorhombic form reveals identical molecular conformations and intermolecular hydrogen bond patterns in both the polymorphs. The two polymorphs show differences in the orientation of molecules constituting a layer of hydrophobic interactions between the cyclohexyl side chains. A comparison of the packing arrangements of the zwitterionic amino acid molecules in the crystal structures of gabapentin monohydrate, the tert-butyl derivatives and other co-crystals of gabapentin that had been characterized so far, is provided which would facilitate prediction of new polymorphs of the widely used drug molecule, Gpn. Chapter 10 describes the crystallization of α-peptide helices in multiple crystal forms (Vasudev et al., 2008b). Crystal structures of two peptides, Boc-Leu-Aib-Phe-Phe-Leu-Aib-Ala-Ala-Leu-Aib-OMe (LFF), Boc-Leu-Aib-Phe-Ala-Leu-Ala-Leu-Aib-OMe (D1) in two crystal forms and the crystal structure of a related sequence, Boc-Leu-Aib-Phe-Ala-Phe-Aib-Leu-Ala-Leu-Aib-OMe (D10) permit an analysis of the molecular conformation and packing patterns of peptide helices in crystals. The two polymorphs of LFF, crystallized in the space groups P21 and P22121, reveal very similar molecular conformation (α/310-helix) in both the polymorphic crystals; the two forms differ significantly in the pattern of solvation. The crystal structure determination of a monoclinic (P21) and an orthorhombic polymorph (P21212) of D1 provides five different peptide conformations, four of which are α-helical and one is a mixed 310/α-helix. The crystal structure determination of the three peptides provide an opportunity to compare the nature and role of aromatic interactions in stabilizing molecular conformation and packing and its significance in the observation of polymorphism. An analysis of the Cambridge Structural Database and a model for nucleation of crystals in hydrophobic peptide helices are also discussed.

Understanding the relation between amino acid sequences and protein structures is one of the most important problems in modern molecular biology. However, due to the complexities in the protein structure, this task is really daunting. Hence, understanding the structural features of proteins and the rules of folding is central to the design of novel and more effective biomaterials. With the inception of the de novo design of synthetic mimetics for protein structural elements, the study of designed peptides is a subject of intense current research. The de novo design of polypeptide structures provides insights into the factors that govern the folding of peptides and proteins. The rational design of synthetic peptide models for secondary structural motifs in proteins depends on the ability to control the polypeptide chain stereochemistry. An approach, which seems to be useful, is the introduction of constrained genetically coded amino acids like Proline or the introduction of non-protein constrained amino acids like Aib which are capable of restricting the range of available backbone conformations of the polypeptide chain. The use of such residues would then permit the design of well defined and intended structural motifs like the β-turns which serve as chain reversal areas of the polypeptide chain. Templates incorporating multiple repeats of such conformationally constrained residues would in turn further enhance the choice of conformational parameters for the polypeptide chain towards folding. Crystal structure determination of the oligopeptides by X-ray diffraction gives insight into the specific conformational states, modes of aggregation, hydrogen bond interactions and solvation of peptides. Precise structural analysis and good characterization of geometrical parameters and stereochemical details of these molecules provide valuable inputs for peptide design and are indispensable for exploring strategies to design peptide sequences which serve as synthetic mimics for folding motifs in proteins. Many of the above points have been investigated in this thesis which incorporates study of designed peptides containing heterochiral and homochiral diproline segments followed by protein database analysis. This thesis reports results of x-ray crystallographic studies of twenty two (22) oligopeptides containing heterochiral or homochiral diproline segments. Apart from the crystal data, protein database analysis has also been carried out to investigate what actually is found in nature. Given in brackets are the compound names used in the thesis for the peptides solved. 1) Piv-DPro-LPro-NHMe ( DPPN ) [C16H27N3O3 ] 2) Piv-DPro-LPro-LVal-OMe ( DPPV ) [C21H35N3O5 . 0.09 H2O] 3) Piv-DPro-LPro-LPhe-OMe ( DPPF ) [C25H35N3O5 . H2O] 4) Piv-DPro-LPro-DAla-OMe ( DPPDA ) [C19H31N3O5] 5) Piv-LPro-DPro-LAla-OMe ( PDPA ) [C19H31N3O5] 6) Piv-DPro-LPro-LVal-NHMe ( DPPVN ) [C21H36N4O4 . H2O] 7) Piv-DPro-LPro-LLeu-NHMe ( DPPLN ) [C22H38N4O4 . 0.34H2O] 8) Piv-DPro-LPro-LPhe-NHMe ( DPPFN ) [C25H36N4O4 . H2O] 9) Piv-DPro-LPro-Aib-NHMe ( DPPUN ) [C20H34N4O4] 10) Piv-DPro-LPro-DAla-NHMe ( DPPDAN ) [C19H32N4O4] 11) Piv-DPro-LPro-DVal-NHMe ( DPPDVN ) [C21H36N4O4 .1.43 H2O] 12) Piv-DPro-LPro-DLeu-NHMe ( DPPDLN ) [C22H38N4O4 . H2O] 13) Piv-LPro-DPro-LAla-NHMe ( PDPAN ) [C19H32N4O4] 14) Piv-LPro-DPro-LVal-NHMe ( PDPVN ) [C21H36N4O4] 15) Piv-LPro-DPro-LLeu-NHMe ( PDPLN ) [C22H38N4O4 . H2O] 16) Piv-LPro-DPro-LVal-OMe ( PDPVO ) [C21H35N3O5 . H2O] 17) Racemic mixture of Piv-DPro-LPro-DVal-NHMe + Piv-LPro-DPro-LVal-NHMe ( PPVVN ) [C21H36N4O4 . 0.74H2O] 18) Racemic mixture of Piv-DPro-LPro-DLeu-NHMe + Piv-LPro-DPro-LLeu-NHMe ( PPLLN ) [C22H38N4O4 . H2O] 19) Racemic mixture of Piv-DPro-LPro-DPhe-NHMe + Piv-LPro-DPro-LPhe-NHMe ( PPFFN ) [C25H36N4O4 . 2 H2O] 20) Piv-LPro-LPro-LPhe-OMe ( PPFO ) [C25H35N3O5 . 0.5 H2O] 21) Piv-LPro-LPro-LVal-NHMe ( PPVN ) [C21H36N4O4 . H2O] 22) Piv-LPro-LPro-Aib-NHMe ( PPUN ) [C20H34N4O4. H2O] Results from the X-ray crystallographic analysis of the above peptides provided substantial information regarding role of diproline templates on the folding of the polypeptide chain. The thesis is divided into the following eight chapters : Chapter 1 gives a general introduction to the stereochemistry of polypeptide chains and the secondary structure classification: helices, β-sheets and β-turns. This section also provides a brief overview of the use of non standard and D-amino acids into peptide design. Discussions on DProline, puckering states of the Proline ring, diproline segments and racemic mixtures of peptides are also presented. A brief discussion on X-ray diffraction and solution to the phase problem is also given. Chapter 2 describes the structural characterization in crystals of the five following designed peptides: Piv-DPro-LPro-NHMe (DPPN), Piv-DPro-LPro-Xxx-OMe [Xxx = LVal (DPPV); LPhe (DPPF); DAla (DPPDA)] and Piv-LPro-DPro-LAla-OMe (PDPA) containing the heterochiral diproline segment with an aim towards understanding the directive influence of short range interaction on polypeptide folding. Except PDPA, in all the structures, a type II’ β-turn was observed at the DPro-LPro segment with the formation of a 4→1 intramolecular hydrogen bond between the atoms of the polypeptide backbone. In PDPA, the expected type II β-turn occurred at the LPro-DPro segment. Thus, the DPro-LPro segment preferably adopts a type II’ β-turn conformation when present at the C-terminus which is mimicked by the methyl ester group. The use of pivalyol group at the N-terminus is to ensure the trans geometry of the peptide bond between pivalyol and the first Proline. Crystal parameters DPPN: C16H27N3O3; P21; a = 10.785(1) Å, b = 15.037(1) Å, c = 11.335(1) Å; β = 109.96(1)°; Z = 4; R = 0.0388, wR2 = 0.1047. DPPV: C21H35N3O5 . 0.09 H2O; P212121; a =10.676(1) Å, b = 16.608(1) Å, c = 39.887(1) Å, Z = 12; R = 0.0688, wR2 = 0.1701. DPPF: C25H35N3O5 . H2O; P21; a = 9.538(1) Å, b = 10.367(1) Å, c = 13.102(1) Å; β = 93.04(1) °; Z = 2; R = 0.0504, wR2 = 0.1455. DPPDA: C19H31N3O5; P21; a = 11.269(1) Å, b = 9.945(1) Å, c = 18.550(2) Å; β = 97.46(1)°; Z = 4; R = 0.0563, wR2 = 0.1249. PDPA: C19H31N3O5; P212121; a = 9.043(1) Å, b = 10.183(2) Å, c = 23.371(1) Å; Z = 4; R = 0.0753, wR2 = 0.1603. Chapter 3 describes the crystal structures of the four following designed peptides containing the heterochiral diproline segment followed by a L-residue or an achiral amino acid residue like Aib : Piv-DPro-LPro-Xxx-NHMe [Xxx = LVal (DPPVN); LLeu (DPPLN); LPhe (DPPFN) and Aib (DPPUN)]. In the first three peptides the DPro-LPro segennt adopts a type II’ β-turn conformation with the formation of a type I β-turn at the LPro-Xxx segment. The peptide backbone overall therefore adopts a consecutive β-turn structure. When the L-amino acids at the C-terminus are replaced by the achiral amino acid Aib, the overall folded structure adopted by the peptide backbone still remains unchanged with the formation of a consecutive β-turn. All the structures are stabilized by two intramolecular 4→1 hydrogen bonds between the C=O group and the nitrogen atom of the polypeptide backbone. Crystal parameters DPPVN: C21H36N4O4 . H2O; P21; a = 9.386(1) Å, b = 12.112(1) Å, c = 10.736(1) Å; β = 99.53(1) °; Z = 2; R = 0.0528, wR2 = 0.1337. DPPLN: C22H38N4O4 . 0.34H2O; P21; a =9.231(1) Å, b = 17.558(1) Å, c = 15.563(1) Å; β = 91.94(1) °; Z = 4; R = 0.0555, wR2 = 0.1422. DPPFN: C25H36N4O4 . H2O; P212121; a = 10.473(1) Å, b = 15.980(1) Å, c = 15.994(1) Å; Z = 4; R = 0.0620, wR2 = 0.1826. DPPUN: C20H34N4O4; P212121; a = 10.571(2) Å, b = 11.063(1) Å, c = 18.536(1) Å; Z = 4; R = 0.0578, wR2 = 0.1256. Chapter 4 describes the crystal structures of the seven designed peptides containing heterochiral diproline segment. Three of these contain sequences of the type DPro-LPro-DXxx [DXxx = DAla (DPPDAN); DVal (DPPDVN); DLeu (DPPDLN)] and three contains the enantiomeric peptides of the ones that are mentioned earlier in sequences of the type LPro-DPro-LXxx [LXxx = LAla (PDPAN); LVal (PDPVN); LLeu (PDPLN)]. In order to investigate the effect of the C-terminal protecting group, a final peptide Piv-LPro-DPro-LVal-OMe (PDPVO) was crystallographically characterized. All the peptides containing the DXxx residues adopted different backbone conformations. For DAla, a structure simultaneously having a β-turn and an α-turn was obtained which is the first example in designed peptides of an isolated α-turn. In the case of DVal, an open / extended structure devoid of any intramolecular hydrogen bonding was obtained whereas for DLeu, type II β-turn occurred at the LPro-DLeu segment instead of the expected type II’ turn at the DPro-LPro segment. In the case of enantiomeric peptides, all the three peptides adopted folded structures with exact mirror image conformation being generated for LAla and nearly identical mirror image conformation in the case of LLeu. The enantiomeric peptide of DVal which contained LVal residue following the diproline segment also adopted a folded conformation with the formation of type II β-turn at the LPro-DPro segment as expected. X-ray crystallographic characterization of PDPVO resulted in the peptide adopting an overall extended / open structure. Thus, the chirality of the C-terminal residue seems to have a profound effect on the conformation of the heterochiral diproline segments. The role of the C-terminal protecting group cannot also be undermined. Crystal parameters DPPDAN: C19H32N4O4; P1; a = 5.964(1) Å, b = 9.354(1) Å, c = 9.961(1) Å; α = 75.44(1), β = 78.90(1) °, γ = 77.04(1); Z = 1; R = 0.0728, wR2 = 0.1528. DPPDVN : C21H36N4O4 .1.43 H2O; P212121; a = 8.744(8) Å, b = 11.609(1) Å, c = 23.577(2) Å; Z = 4; R = 0.0625, wR2 = 0.1856. DPPDLN : C22H38N4O4 . H2O; P212121; a = 10.531(3) Å, b = 11.659(3) Å, c = 20.425(6) Å; Z = 4; R = 0.0444, wR2 = 0.1239. PDPAN: C19H32N4O4; P1; a = 5.964(1) Å, b = 9.354(2) Å, c = 9.961(2) Å; α = 75.44(1), β = 78.90(1) °, γ = 77.04(1); Z = 1; R = 0.0745, wR2 = 0.1572. PDPVN : C21H36N4O4; P212121; a = 9.743(1) Å, b = 11.423(1) Å, c = 21.664(3) Å; Z = 4; R = 0.0803, wR2 = 0.1899. PDPLN : C22H38N4O4 . H2O; P212121; a = 10.462(4) Å, b = 11.572(4) Å, c = 20.262(7) Å; Z = 4; R = 0.0968, wR2 = 0.2418. PDPVO : C21H35N3O5 . H2O; P212121; a = 8.784(4) Å, b = 11.587(5) Å, c = 23.328(1) Å; Z = 4; R = 0.0888, wR2 = 0.1465. Chapter 5 describes the crystal structures of the three designed peptides containing racemic mixtures [Racemic mixture of Piv-DPro-LPro-DVal-NHMe + Piv-LPro-DPro-LVal-NHMe (PPVVN); Racemic mixture of Piv-DPro-LPro-DLeu-NHMe + Piv-LPro-DPro-LLeu-NHMe (PPLLN); Racemic mixture of Piv-DPro-LPro-DPhe-NHMe + Piv-LPro-DPro-LPhe-NHMe (PPFFN)] having the heterochiral diproline segment in their sequences and three peptides having a homochiral diproline segment [Piv-LPro-LPro-LPhe-OMe (PPFO); Piv-LPro-LPro-LVal-NHMe (PPVN); Piv-LPro-LPro-Aib-NHMe (PPUN)]. The inability of the pure enantiomers to crystallize in the case of Phe (chapter 4) invoked the use of peptide racemates for obtaining a crystal state conformation for the said compound. In all the cases, the L-enantiomer of Xxx crystallized in the asymmetric unit. A type II β-turn was obtained in the case of PPVVN at the LPro-DPro segment and a type II’ β-turn was obtained for PPLLN at the DPro-LLeu segment. in the case of Phe, an open structure devoid of any intermolecular hydrogen bonding an very similar to DPPDVN (chapter 4) was obtained. In the case of homochiral diproline segment containing peptides, PPFO crystallized with two molecules in the asymmetric unit, both of which adopted a type VIA1 hydrogen bonded β-turn conformation with a cis peptide bond between the diproline segment. In the case of Valine (PPVN) however, a structure devoid of any intramolecular hydrogen bonding was obtained. In the final peptide PPUN, a type II β-turn conformation is observed at the LPro-Aib segment. The analysis revealed that the hydration of the peptide can cause dramatic changes in its backbone conformation. In homochiral LPro-LPro sequences, the tendency to form hydrogen bonded turns competes with the formation of semi-extended polyproline structures. The results also emphasize the subtle role of sequence effects in modulating the conformations of short, constrained peptide segments. The possibility of trapping distinct conformational segments of the diproline segments in crystals by generating racemic centro-symmetric crystals in which packing effects may be appreciably different from those observed in the crystals of individual pure enantiomeric peptides has been clearly exploited in this chapter to obtain a crystal in the case of Phe. These results suggest that the energetic differences between these states is small. Conformational choice can therefore be readily influenced by environmental and sequence effects. Crystal parameters PPVVN: C21H36N4O4 . 0.74H2O; C2/c; a = 36.667(17) Å, b = 10.092(5) Å, c = 13.846(6) Å; β = 107.27(1) °; Z = 8; R = 0.1317, wR2 = 0.3141. PPLLN: C22H38N4O4 . H2O; P21/c; a = 10.555(1) Å, b = 11.687(1) Å, c = 20.108(2) Å; β = 95.47(1) °; Z = 4; R = 0.0761, wR2 = 0.2034. PPFFN: C25H36N4O4 . 2 H2O; P21/c; a = 8.883(5) Å, b = 18.811(10) Å, c = 16.033(9) Å; β = 96.28(1) °; Z = 4; R = 0.1218, wR2 = 0.2848. PPFO : C25H35N3O5 . 0.5 H2O; P212121; a = 10.199(1) Å, b = 20.702(2) Å, c = 23.970(2) Å; Z = 8; R = 0.0716, wR2 = 0.1901. PPVN : C21H36N4O4 . H2O; P212121; a = 9.454(1) Å, b = 11.119(1) Å, c = 23.021(2) Å; Z = 4; R = 0.0551, wR2 = 0.1587. PPUN: C20H34N4O4. H2O; P21; a = 6.276(1) Å, b = 14.011(2) Å, c = 12.888(1) Å; β = 96.80(1) °; Z = 2; R = 0.0475, wR2 = 0.1322. Chapter 6 describes the pyrrolidine ring puckering states of the Proline residue present in diproline segments in the peptides solved in this thesis, the Cambridge structural database (CSD) [only acyclic diproline containing peptides have been taken into account] and in a non-redundant dataset of proteins in the Protein Data Bank (PDB). The five membered pyrrolidine ring of Proline can be best characterized in terms of the following five endocyclic torsion angles χ1, χ2, χ3,χ4 and θ. Using various values of these endocyclic torsion angles the following puckering states were identified : [1] Cγ-exo (A) [2] Cγ-endo (B) [3] Cβ-exo (C) [4] Cβ-endo (D) [5] Twisted Cγ-exo-Cβ-endo (E) [6] Twisted Cγ-endo-Cβ-exo (F) [7] Planar (G) [8] Cα-distorted (H) [9] Twisted Cβ-exo-Cα-endo (I) [10] Cδ-endo (K) [11] N-distorted (L) [12] Twisted Cδ-endo- Cγ-exo (N). In the case of peptides solved in this thesis for heterochiral diproline segments, the Cγ-exo / Cβ-exo (AC) combination turns out to more preferred than the other combinations. The Cγ-endo / Cγ-endo (BB) state is the second most populated state. The overall investigation of Proline rings in peptides show that the states Cγ-exo (A), Cβ-exo (C) and Twisted Cγ-endo-Cβ-exo (F) are the most preferred states of occurrence of the pyrrolidine ring conformation. In the case of proteins, the overall percentage distribution of various combinations indicates that the AA (Cγ-exo / Cγ-exo), AE (Cγ-exo / Twisted Cγ-exo-Cβ-endo) and FF (Twisted Cγ-endo-Cβ-exo / Twisted Cγ-endo-Cβ-exo) categories are the most preferred combinations. For Proline rings in proteins, the states Cγ-exo (A), Twisted Cγ-exo-Cβ-endo (E) and Twisted Cγ-endo-Cβ-exo (F) are the most preferred states of occurrence of the pyrrolidine ring conformation. Chapter 7 describes the analysis of diproline segments in a non-redundant dataset of proteins In this chapter, the possible conformational states for the diproline segment (LPro-LPro) found in proteins taken from a non-redundant dataset has been investigated an identified with an emphasis on the cis and trans states for the peptide bond between the diproline segment. The occurrence of diproline segments in type VIA1 turns (cis Pro-Pro peptide bond) and other regular secondary structures like type III β-turns and α-helices has been studied. This has been followed up by the amino acid distribution flanking the diproline segment and the conformation adopted by Xaa-Pro and Yaa-Pro segments in proteins. It is observed that for cis Pro-pro peptide bond, the conformation adopted by the first Proline lies in PII region whereas the second Proline inevitably adopts a conformation in the Bridge region, leading to the formation of the type VIA1 β-turn structure. But in the trans case, the conformation adopted by the first Proline is overwhelmingly populated in the PII (Polyproline) and right-handed α-helical region. For position i+2, the major conformation adopted by Proline is P II and α with a substantial amount of occurrences in Bridge and the C7 (γ-turn) region. The analysis also reveals that the cis-cis configuration of the peptide bond is very rare when considering the diproline segment. With a cis-trans peptide linkage, PII-PII conformation is the most stable and favoured conformation for the Pro-Pro segment in proteins. With trans peptide bond linkage between the Proline residues, α- α and PII-Bridge conformations are equally likely for the diproline segment. The population in trans-cis and cis-trans states are comparable indicating that the energy differences between these states is small. However, trans-trans is the most populated state with a percentage occurrence of 85.43%. The analysis and comparison of conformational states for the Xaa-Pro-Yaa sequence reveals that the Xaa-Pro peptide bond exists preferably as the trans conformer rather than the cis conformer. The same is valid for Pro-Yaa segment, with the cis conformer being populated to even lesser extent. The data shows that α- α, PII-α, PII-PII and extended-PII are the most populated states for Xaa-Pro and Pro-Yaa segments as compared to PII-PII and PII-α and states observed for the Pro-Pro segment. Chapter 8 describes the analysis of single and multiple β-turns in a non-redundant dataset of proteins. The analysis on β-turns in proteins has shed a new light into the propensity values for amino acid residues at various positions of β-turns which in certain cases have undergone appreciable change in values than previously observed. One of the other notable feature of the analysis is the fact that the data displays a higher occurrence of unprimed β-turns of type I and type II as compared to their primed counterparts of type I’ and type II’ as previously observed. In fact, the results show that type I β-turn is the highest occurring turn both in isolated as well as in consecutive β-turn examples. The analysis of multiple β-turns in proteins has revealed many new categories like the (I,I+1,I+3), (I,I+2,I+3) and combination of turns which can be used for the design of the loops, especially in the case of β-hairpins. Among the multiple turns, double turns occur more frequently than the other consecutive turns like triple and quadruple turns. It is also important to note that the number of examples of a hydrogen bonded turn being followed by a hydrogen bonded turn is very less with type IV turn preceding a primed turn in most of the cases. Thus, the data available from consecutive β-turn analysis and the type-dependent amino acid positional preferences and propensities derived from the present study may be useful for modeling various single and consecutive turns, especially in designing loop regions of β-hairpins.

No description available.

No description available.

This dissertation primarily covers the impact of bulky ,-dehydroamino acids on the proteolytic stability and enhanced folding of -hairpins. It partly describes the progress towards the total synthesis of yakuamide A, a potent anticancer peptide with an IC50 value of 14 ng/mL against leukemia cells. Proteins and peptides are a very attractive source of potential medicinal agents as they can target various protein“protein interactions that are implicated in several diseases and disorders. The global sales of peptide drugs in 2013 were estimated to be about $28 billion and are constantly rising at an appreciable rate. However, peptide drugs have a short plasma half-life because of their susceptibility to proteolysis. Multiple approaches have been discovered to overcome this shortcoming, but there is still an urgent need for better peptidomimetics to increase the stream of peptides entering the pharmaceutical market. Here, it has been demonstrated that the incorporation of a bulky ,-dehydroamino acid in the turn regions of -hairpins can substantially increase their proteolytic stability and folding. Insertion of a dehydrovaline (ΔVal) residue at the i+1 position imparted ca. 7-fold increase in proteolytic resistance and ca. 15% increase in folding when compared to the parent peptide. Since the insertion of a bulky ,-dehydroamino acid into the turn regions of -hairpins can promote proteolytic stability without perturbing the secondary structures, it is believed that this novel approach is very promising in stabilizing bioactive turn-containing peptides for therapeutic use.Yakuamide A is a medium-sized peptide that contains several bulky dehydroamino acids, -hydroxyamino acids and unique N- and C-termini. It has an unprecedented anticancer profile, and potent bioactivity, hence it was imperative to accomplish its total synthesis to elicit its unique mode of action and biological target. More efficient methods were developed to synthesize bulky dehydroamino acids and -hydroxyamino acids. A regioselective base-free aminohydroxylation was developed for the synthesis of -hydroxyamino acids. The major focus was the three-step synthesis of the N-terminal acyl group from a known compound by a one-pot indium-catalyzed cross-Claisen condensation/reduction and the synthesis of (2S,3R)--hydroxyisoleucine, and racemic -hydroxyisoleucine, which are the precursors of E- and Z-dehydroisoleucine.

Previous studies of short DNA hairpins have revealed that loop and stem sequences can significantly affect the thermodynamic stability of short DNA hairpins. Nevertheless, there has not been sufficient investigation into the pressure-temperature stability of DNA hairpins, and the current thermodynamic knowledge of DNA hairpins’ stability is limited to the temperature domain. In this work, we report the effect of hydrostatic pressure on the helix-coil transition temperature (TM) for eleven short DNA hairpins at different salt concentrations by performing UV-monitored melting. The studied hairpins form by intramolecular folding of 16-base self-complementary DNA oligo¬deoxy¬ribonucleotides. Model dependent (van’t Hoff) transition parameters such as ΔHvH and transition volume (ΔV) were estimated from analysis of optical melting transitions. Experiments revealed the ΔV for denaturation of these molecules range from -2.35 to +6.74 cm3mol-1. The difference in the volume change for this transition is related to differences in the hydration of these molecules.

Previous studies of short DNA hairpins have revealed that loop and stem sequences can significantly affect the thermodynamic stability of short DNA hairpins. Nevertheless, there has not been sufficient investigation into the pressure-temperature stability of DNA hairpins, and the current thermodynamic knowledge of DNA hairpins’ stability is limited to the temperature domain. In this work, we report the effect of hydrostatic pressure on the helix-coil transition temperature (TM) for eleven short DNA hairpins at different salt concentrations by performing UV-monitored melting. The studied hairpins form by intramolecular folding of 16-base self-complementary DNA oligo¬deoxy¬ribonucleotides. Model dependent (van’t Hoff) transition parameters such as ΔHvH and transition volume (ΔV) were estimated from analysis of optical melting transitions. Experiments revealed the ΔV for denaturation of these molecules range from -2.35 to +6.74 cm3mol-1. The difference in the volume change for this transition is related to differences in the hydration of these molecules.

This thesis describes NMR studies which probe weak interactions between amino acid side chains in folded peptide structures. Aromatic/aromatic interactions between facing phenylalanine residues have been probed in antiparallel β-sheets, while aromatic/proline interactions have been examined using cyclic peptide disulfides that occur in the venom of marine cone snails. Novel intramolecular hydrogen bonded structures in hybrid peptides containing backbone homologated residues, specifically γ-amino acids, are also described. Chapter 1 provides a brief background to the principles involved in the design of antiparallel β-sheet structures and an introduction to previous studies on aromatic/aromatic and aromatic/proline interactions in influencing peptide conformations. A summary of the NMR methods used is also presented. Chapter 2 discusses the structural characterisation of a designed 14 residue, three stranded β-sheet peptide, Boc-LFVDP-PLFVADP-PLFV-OMe (LFV14). The results described in this Chapter support the presence of multiple conformational states about the χ1 (Cα-Cβ) torsional degree of freedom for the interacting aromatic pairs in solution. Chapter 3 presents the structural characterisation of a designed 19 residue three stranded hybrid β-sheet peptide, Boc-LVβFVDPGLβFVVLDPGLVLβFVV-OMe (BBH19). β-amino acid residues (β-phenylalanine, βPhe) were incorporated at facing positions on antiparallel β-sheets. The BBH19 structure provides an example of interaction between the N and C-terminal strands in a three stranded structure with an α/β hybrid backbone. Chapter 4 focuses on studies of the conformations of the contryphan In936 (GCVDLYPWC*) from Conus inscriptus and the related peptide Lo959 (GCPDWDPWC*) from Conus loroissi. Both peptides possess a macrocyclic 23 membered ring, with multiple accessible conformational states. Chapter 5 describes conformational analysis of a novel 20 membered cyclic peptide disulfide, CIWPWC (Vi804), from Conus virgo. NMR structures were calculated for Vi804 and an analog peptide, CIDWPWC, DW3-Vi804. Chapter 6 explores the solution conformation of hybrid sequences containing α and γ residues. Oligopeptides of the type (αγ)n and (αγγ)n have been studied in solution by NMR methods. Chapter 7 provides a summary of the results described in this thesis and highlights the major conclusions.