Spelling suggestions: "subject:"highintensity laser"" "subject:"high.intensity laser""
1 |
Simulations of Electron Trajectories in an Intense Laser Focus for Photon Scattering ExperimentsTarbox, Grayson J. 01 March 2015 (has links)
An experiment currently underway at BYU is designed to test whether the size of a free electron wave packet affects the character of scattered radiation. Using a semi-classical argument wherein the wave packet is treated as a diffuse charge distribution, one would expect strong suppression of radiation in the direction perpendicular to the propagating field as the wave packet grows in size to be comparable to the wavelength of the driving field. If one disallows the interaction of the wave packet with itself, as is the case when calculating the rate of emission using QED, then regardless of size, the electron wave packet radiates with the strength of a point-like emitter. In support of this experiment, we explore a variety of physical parameters that impact the rate of scattered photons. We employ a classical model to characterize the exposure of electrons to high-intensity laser light in a situation where the electrons are driven by strong ponderomotive gradients. Free electrons are modeled as being donated by low-density helium, which undergoes strong-field ionization early on in the pulse or during a pre-pulse. When exposed to relativistic intensities (i.e. intensities sufficient to cause a Lorentz drift at a significant fraction of c), free electrons experience a Lorentz drift that causes redshifting of the scattered 800 nm laser light. This redshift can be used as a key signature to discern light scattered from the more intense regions of the focus. We characterize the focal volume of initial positions leading to significant redshifting, given a peak intensity of 2 x 10^18 W/cm 2 , which is sufficient to cause a redshift in scattered light of approximately 100 nm. Under this scenario, the beam waist needs to be larger than several wavelengths for a pulse duration of 35 fs in order to ensure free electrons remain in the focus sufficiently long to experience intensities near the peak pulse intensity despite strong ponderomotive gradients. We compute the rate of redshifted scattered photons from an ensemble of electrons distributed throughout the focus and relate the result to the scattered-photon rate of a single electron. We also estimate to what extent the ionization process may produce unwanted light in the redshifted spectral region that may confound the measurement of light scattered from electrons experiencing intensities greater than 1.5 x 10^18 W/cm^2.
|
2 |
Nonlocal theory of relativistic ponderomotive force in high intensity lasers based on the phase space Lagrangian and the role in the interaction with various mediums / 位相空間ラグランジアンに基づく高強度レーザーの相対論的動重力の非局所理論と様々な媒質との相互作用におけるその役割Iwata, Natsumi 24 March 2014 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第18384号 / エネ博第296号 / 新制||エネ||61(附属図書館) / 31242 / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 岸本 泰明, 教授 中村 祐司, 教授 松田 一成 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM
|
3 |
Measuring Nonlinear Thomson Scattering at Arbitrary Emission AnglesRomero Carranza, Mahonri 09 August 2022 (has links)
We use photon-counting to measure nonlinear Thomson scattering from low-density electrons in an intense laser focus. The azimuthal and longitudinal polarization components of the second harmonic are measured across much of the full emission sphere. The data show, for the first time experimentally, emission structure in the ‘Northern’ and ‘Southern’ hemispheres, where the ‘North Pole’ aligns with the direction of laser propagation. To obtain these measurements, we installed an additional power amplifier on our Ti:sapphire laser system at BYU. The upgrade delivers ten times more energy to the laser focus than we had previously. This increase comes partly from the additional amplifier and partly from increased grating efficiency in our pulse compressor. We achieve an on-target pulse energy of 200 mJ at 35 fs. The focal spot size has radius w0 = 4 μm. This corresponds to an available peak intensity of over 1019 W/cm2, an order of magnitude above the onset of strong relativistic effects. The interaction region in the laser focus has a length of approximately 100 μm. Photons scattered from this region are collected using a 5-cm-focal-length lens and then focused onto the end of a 100-μm-diameter fiber by a second identical lens. The imaging system requires precise alignment with the laser focus, which must be maintained when rotating the photon-collection system along the longitudinal direction of the emission sphere. We developed an alignment procedure that ensures that the detector rotation axis aligns with region of space that is imaged onto the fiber. This region is then aligned to the laser focal spot.
|
4 |
HIGH INTENSITY LASER POWER BEAMING FOR WIRELESS POWER TRANSMISSIONRaible, Daniel Edward 15 May 2008 (has links)
No description available.
|
5 |
Plasma dynamics between laser-induced breakdown and relativistically induced transparency: An investigation of high-intensity laser-solid interactions by time-resolved off-harmonic optical shadowgraphyBernert, Constantin 23 May 2024 (has links)
Laser-plasma-based ion accelerators are becoming a versatile platform to drive different fields of applied research and life sciences, for example translational research in radiation oncology. To ensure stable accelerator performance, complete control over the ion source, i.e., the high-intensity laser-solid interaction, is required. However, idealized interaction conditions are almost impossible to reach, as the utilized high-power lasers always feature a non-negligible amount of light preceding the laser peak. This leading edge of the laser pulse usually exceeds the ionization potential of bound electrons much earlier than the arrival of the high-power laser peak and the solid-density target undergoes significant modifications even before the actual high-intensity laser-plasma interaction starts. Control over this so-called target pre-expansion is a key requirement to achieve quantitative agreement between numerical simulations and experiments of high-intensity laser-solid interactions.
This thesis investigates several aspects that are relevant to improve the capability of simulations to model realistic experimental scenarios. The corresponding experiments are conducted with cryogenic hydrogen-jet targets and the DRACO-PW laser at peak intensities between 10^12 W/cm^2 and 10^21 W/cm^2 . The experimental implementation of time-resolved optical-probing diagnostics and technical innovations with respect to the technique of off-harmonic optical probing overcome the disturbances by parasitic plasma self-emission and allow for unprecedented observations of the target evolution during the laser-target interactions. The laser-induced breakdown of solids, i.e., the phase transition from the solid to the plasma state, can be considered as an heuristic starting point of high-intensity laser-solid interactions. As it is highly relevant to simulations of target pre-expansion, Chapter 3 of this thesis presents time-resolved measurements of laser-induced breakdown in laser-target interactions at peak intensities between 0.6 * 10^21 W/cm^2 and 5.7 * 10^21 W/cm^2 . By increasing the peak intensity, a lowering of the applicable threshold intensity of laser-induced breakdown well below the appearance intensity of barrier-suppression ionization occurs. The observation demonstrates the relevance of the pulse-duration dependence of laser-induced breakdown and laser-induced damage threshold to the starting point of high-intensity laser-solid interactions. To apply the results to other laser-target assemblies, we provide a detailed instruction of how to pinpoint the starting point by comparing measurements of the laser contrast with a characterization study of the target-specific thresholds of laser-induced breakdown at low laser intensity. Chapter 4 of this thesis presents an example of how optical-probing diagnostics are able to estimate target pre-expansion as a starting condition for particle-in-cell simulations. The measurement allows to restrict the surface gradient of the pre-expanded plasma density to an exponential scalelength between 0.06 um and 0.13 um. Furthermore, the plasma-expansion dynamics induced by the ultra-relativistic laser peak are computed and post-processed by ray-tracing simulations. A comparison to the experimental results yields that the formation of the measured shadowgrams is governed by refraction in the plasma-density gradients and that the observed volumetric transparency of the target at 1.4 ps after the laser peak is not caused by relativistically induced transparency but by plasma expansion into vacuum instead.
|
6 |
Study of nonlinear structures and dynamics in collisionless plasmas created by the interaction between high power laser and cluster medium / 高強度レーザーとクラスター媒質との相互作用により生成する無衝突プラズマ中での非線形構造とダイナミクスに関する研究Matsui, Ryutaro 25 March 2019 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第21888号 / エネ博第389号 / 新制||エネ||75(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 岸本 泰明, 教授 中村 祐司, 教授 田中 仁 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM
|
7 |
Photoemission by Large Electron Wave Packets Emitted Out the Side of a Relativistic Laser FocusCunningham, Eric Flint 08 July 2011 (has links) (PDF)
There are at least two common models for calculating the photoemission of accelerated electrons. The 'extended-charge-distribution' method uses the quantum probability current (multiplied by the electron charge) as a source current for Maxwell's equations. The 'point-like-emitter' method treats the electron like a point particle instead of like a diffuse body of charge. Our goal is to differentiate between these two viewpoints empirically. To do this, we consider a large electron wave packet in a high-intensity laser field, in which case the two viewpoints predict measurable photoemission rates that differ by orders of magnitude. Under the treatment of the 'extended-charge-distribution' model, the strength of the radiated field is significantly limited by interferences between different portions of the oscillating charge density. Alternatively, no suppression of photoemission occurs under the 'point-like-emitter' model because the electron is depicted as having no spatial extent. We designed an experiment to characterize the photoemission rates of electrons accelerated in a relativistic laser focus. Free electron wave packets are produced through ionization by an intense laser pulse at the center of a large vacuum chamber. These quantum wave packets can become comparable in size to the laser wavelength through natural spreading and interactions with the sharp ponderomotive gradients of the laser focus. Electron radiation emitted out the side of the focus is collected by one-to-one imaging into a 105-micron gold-jacketed fiber, which carries the light to a single photon detector located outside the chamber. The electron radiation is red-shifted due to mild relativistic acceleration, and we use this signature to spectrally filter the outgoing light to discriminate against background. In addition, the temporal resolution of the electronics allows distinction between light that travels directly from the focus into the collection system and laser light that may scatter from the chamber wall.
|
8 |
Modifying the target normal sheath accelerated ion spectrum using micro-structured targetsGeorge, Kevin Mitchell 23 May 2017 (has links)
No description available.
|
9 |
Few-cycle OPCPA laser chain / Chaine laser à base d’OPCPA pour des impulsions de peu de cycles optiquesRamirez, Lourdes Patricia 29 March 2013 (has links)
La chaîne laser Apollon 10PW est un projet de grande envergure visant à fournir des impulsions de 10 PW et atteindre des intensités sur cibles de 10^22 W/cm^2. Dans l’état de l'art actuel, les lasers à dérive de fréquence (CPA) de haute intensité à base de cristaux titane saphir (Ti:Sa), sont limités à des puissances de crête de 1,3 PW pour des impulsions de 30-fs, en raison du rétrécissement spectral par gain dans les amplificateurs. Pour accéder au régime multipetawatt, le rétrécissement de gain doit être évité. Pour cela une technique alternative d’amplification appelée amplification paramétrique optique d'impulsions à dérive de fréquence (OPCPA) est utilisée. Elle offre la possibilité d’amplifier sur des très larges bandes spectrales de gain et d’accéder à des durées d'impulsion aussi courtes que 10 fs. Le laser Appolon 10 PW exploite une technologie hybride d’OPCPA et de Ti:Sa-CPA pour atteindre in fine des impulsions de 15 fs avec une énergie de 150 J. L’OPCPA est réalisé essentiellement sur les étages d'amplification de basse énergie et de très fort gain (ou le rétrécissement par le gain se fait le plus ressentir), ceci pour obtenir des impulsions de 100 mJ, 10 fs. Deux étages OPCPA sont préus ; le premier en régime picoseconde, le second en régime nanoseconde, et subséquemment on utilisera le Ti:Sa pour l'amplification de très haute énergie pour atteindre le régime multi-Joule.Les travaux de cette thèse porte sur le pilote OPCPA du laser Apollon-10 PW et se concentre sur le développement d’une source d’impulsions ultra-courtes avec un contraste élevé. Pour atteindre l’objectif final de 15 fs, 150 J, le pilote doit permettre l’obtention d’impulsions dont le spectre supporte des durées de 10 fs, ceci avec un contraste temporel d'au moins 10^10. Dans cette thèse nous nous intéressons à la mise en œuvre des premiers étages du pilote. Ce travail concerne les étages de compression, de nettoyage d’impulsions et d’amplification OPCPA en régime picoseconde. Ainsi, en partant d'une source commerciale Ti:Sa délivrant des impulsions de 25-fs avec un contraste de 10^8, nous réalisons tout d’abord un élargissement spectral par auto-modulation de phase et une amélioration du contraste par génération de polarisation croisée (XPW). Ensuite, nous nous intéressons aux différents étireurs ps possibles incluant un filtre dispersif programmable (dazzler) en vue d’injecter l’OPCPA picoseconde de manière optimale. La solution directe utilisant un bloc de verre BK7 a été retenue et son association avec un compresseur compact pour le diagnostique de la compressibilité a été étudiée. Enfin, l’amplificateur OPCPA ps a été mis en œuvre dans des configurations à simple et double étages. / The Apollon-10 PW laser chain is a large-scale project aimed at delivering 10 PW pulses to reach intensities of 10^22 W/cm^2. State of the art, high intensity lasers based solely on chirped pulse amplification (CPA) and titanium sapphire (Ti:Sa) crystals are limited to peak powers reaching 1.3 PW with 30-fs pulses as a result of gain narrowing in the amplifiers. To access the multipetawatt regime, gain narrowing can be suppressed with an alternative amplification technique called optical parametric chirped pulse amplification (OPCPA), offering a broader gain bandwidth and pulse durations as short as 10 fs. The Apollon-10 PW laser will exploit a hybrid OPCPA-Ti:Sa-CPA strategy to attain 10-PW pulses with 150 J and 15 fs. It will have two high-gain, low-energy amplification stages (10 fs ,100 mJ range) based on OPCPA in the picosecond and nanosecond timescale and afterwards, and will use Ti:Sa for power amplification to the 100-Joule level.Work in this thesis involves the progression of the development on the Apollon-10 PW front end and is focused on the development of a high contrast, ultrashort seed source supporting 10-fs pulses, stretching these pulses prior to OPCPA and the implementation of the picosecond OPCPA stage with a target of achieving 10-mJ pulses and maintaining its bandwidth. To achieve the final goal of 15-fs, 150-J pulses, the seed source must have a bandwidth supporting 10-fs and a temporal contrast of at least 10^10. Thus from an initial commercial Ti:Sa source delivering 25-fs pulses with a contrast of 10^8, spectral broadening via self-phase modulation and contrast enhancement with cross polarized (XPW) generation was performed. Subsequently, the seed pulses were stretched to a few picoseconds to match the pump for picosecond OPCPA. Strecher designs using an acousto-optic programmable dispersive filter (dazzler) for phase control in this purpose are studied. A compact and straightforward compressor using BK7 glass is used and an associated compressor for pulse monitoring was also studied. Lastly, the picosecond OPCPA stage was implemented in single and dual stage configurations.
|
10 |
Few-cycle OPCPA laser chainRamirez, Lourdes Patricia 29 March 2013 (has links) (PDF)
The Apollon-10 PW laser chain is a large-scale project aimed at delivering 10 PW pulses to reach intensities of 10^22 W/cm^2. State of the art, high intensity lasers based solely on chirped pulse amplification (CPA) and titanium sapphire (Ti:Sa) crystals are limited to peak powers reaching 1.3 PW with 30-fs pulses as a result of gain narrowing in the amplifiers. To access the multipetawatt regime, gain narrowing can be suppressed with an alternative amplification technique called optical parametric chirped pulse amplification (OPCPA), offering a broader gain bandwidth and pulse durations as short as 10 fs. The Apollon-10 PW laser will exploit a hybrid OPCPA-Ti:Sa-CPA strategy to attain 10-PW pulses with 150 J and 15 fs. It will have two high-gain, low-energy amplification stages (10 fs ,100 mJ range) based on OPCPA in the picosecond and nanosecond timescale and afterwards, and will use Ti:Sa for power amplification to the 100-Joule level.Work in this thesis involves the progression of the development on the Apollon-10 PW front end and is focused on the development of a high contrast, ultrashort seed source supporting 10-fs pulses, stretching these pulses prior to OPCPA and the implementation of the picosecond OPCPA stage with a target of achieving 10-mJ pulses and maintaining its bandwidth. To achieve the final goal of 15-fs, 150-J pulses, the seed source must have a bandwidth supporting 10-fs and a temporal contrast of at least 10^10. Thus from an initial commercial Ti:Sa source delivering 25-fs pulses with a contrast of 10^8, spectral broadening via self-phase modulation and contrast enhancement with cross polarized (XPW) generation was performed. Subsequently, the seed pulses were stretched to a few picoseconds to match the pump for picosecond OPCPA. Strecher designs using an acousto-optic programmable dispersive filter (dazzler) for phase control in this purpose are studied. A compact and straightforward compressor using BK7 glass is used and an associated compressor for pulse monitoring was also studied. Lastly, the picosecond OPCPA stage was implemented in single and dual stage configurations.
|
Page generated in 0.0933 seconds