¡@¡@A high efficient packaging technique was proposed for power InGaN light emitting diodes( LEDs ).In this approach , sub-mounts based on Si bench technology were used to provide a fact heat conducting channel between the LEDs and the cases.Two different structures of the Si sub-mounts were used, namely, a conventional Si block and a Si block with a copper-filled V-groove. ¡@¡@The thermal resistance of the two different sub-mounts were measured and compared. For a 45mil power LED biased at 1W, thermal resistance of 12.77¢J/W and 18.79¢J/W were measured for the Si sub-mount and the Si sub-mount with copper-filled V-groove. We believe the better thermal resistance of the sub-mount with copper-filled V-groove is due to high thermal conductivity of the copper.

The goal of this research work is to develop and analyze Quantum Dot (QD) lasers aimed at improving high power performance which is crucial for numerous scientific, military and industrial applications. Fundamentally two dissimilar types of lasers are investigated: namely bipolar electron-hole laser and unipolar quantum cascade laser. Planar quantum well (QW) laser diodes are already well-established as commercially available high power semiconductor lasers. However these lasers are unable to deliver power greater few 10's of watts due to reduction in efficiency at longer cavity lengths. This limitation arises from inherent optical losses tied to the two-dimensional density of available states in QWs. A novel approach is proposed here to circumvent this limitation by introducing self-assembled QDs into the laser cavity which due to their delta-like discrete density of states promise to reduce the optical losses by at least an order of magnitude, hence allowing cavity length to increase proportionally. Detailed analysis based on harmonic oscillator model and solution at quasi-equilibrium condition reveal that total internal losses as low as 0.05 per cm⁻¹ can be achieved in a QD laser enabling it to deliver 50 watts of power from each bar while maintaining efficiency close to 90%. In order to take full advantage of the discrete atom-like behavior, it is also of utmost importance to reduce the inhomogeneous broadening of the dot distribution originating from size fluctuation. Experimental data of ultra narrow linewidth InAs quantum dots having linewidth of only 22 meV is presented. Research attempt has been taken to integrate these narrowly distributed dots into a workable structure. Preliminary data shows that these dots are extremely sensitive to the laser material which calls for careful optimization of the entire structure. As for the unipolar QCL, it is shown that internal absorption caused by phonon emission of electrons in a planar quantum cascade laser represents a possible limitation to the maximum operating efficiency. Possibility of reducing this absorption is explored and it is optimistically asserted that introducing QDs into the gain stage of a QCL can eliminate this internal loss mechanism, thus greatly improving high power operating characteristics.

The remainder of this thesis considers the longitudinal coherence of the copper vapour laser, and describes the design and initial performance of a narrow bandwidth dye laser for use with a CVL. Careful construction of a grazing-incidence grating arrangement similar to that of Littman has resulted in a laser which is particularly simple to align and which promises ease of tuning over a wide range. Operation confined to a single longitudinal mode has been demonstrated, corresponding to single shot bandwidths below IGHz, but instabilities caused by vibration and uneven dye flow broaden the time-averaged width to around 3GHz. Suggested improvements have not yet been implemented.

This thesis presents and investigates Space Vector Modulation (SVM) switching strategies for (i) a multi-level Diode-Clamped Converter (DCC) and (ii) a multi-module Voltage-Sourced Converter (VSC) system in which each module is a conventional two-level VSC. Although the SVM strategies are general and applicable for n-level DCC and n-module VSC systems, this text only concentrates on five-level DCC and four-module VSC systems. For a five-level DCC, a computationally efficient SVM algorithm is proposed. The algorithm, that is based on a classifier Neural Network (NN), reduces the computational time for the SVM realization. Therefore, adequate saving of processor execution time, in each sampling period of SVM, is provided to carry out other functions, e.g. the calculations required for DC-capacitor voltage balancing task. The thesis also proposes a DC-capacitor voltage balancing strategy to counteract the voltage drift phenomenon of (i) a passive-front-end five-level DCC, and (ii) a back-to-back connected five-level DCC system. The proposed balancing strategy, that is based on augmenting the proposed SVM algorithm, takes advantage of the redundant switching states to minimize a quadratic cost function associated with voltage deviations of the DC-capacitors. The salient features of the proposed balancing strategy are (i) online calculation of SVM to select the best switching states, (ii) minimization of switching frequency, (iii) minimization of the THD content of the AC-side voltage, and (iv) no requirement for additional power circuitry. For a four-module VSC system a sequential sampling SVM strategy is proposed. The proposed strategy (i) provides harmonic cancellation/minimization at the net AC-side voltage of the multi-module VSC system, and (ii) offers a low switching frequency for each VSC module. Technical feasibility of the proposed SVM strategies for a five-level DCC and a four-module VSC system, as a STATCOM and a back-to-back HVDC system, are investigated and presented. The studies are conducted in the time-domain, in the PSCAD/EMTDC software environment.

Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.

Thesis (Ph. D.)--University of Texas at Austin, 1998. / Vita. Includes bibliographical references (leaves 96-99). Available also in a digital version from Dissertation Abstracts.

Recent advances in the development of high power short pulse laser systems has opened a new regime of laser plasma interactions for study. The thesis is presented in two parts. In Part I, we consider the implications of these high power laser pulses for the interaction with a uniform underdense plasma, with particular regard to plasma-based accelerators. We present a scheme for the resonant excitation of large electrostatic Wakefields in these plasmas using a train of ultra-intense laser pulses. We also present an analysis of the resonant mechanism of this excitation based on consideration of phase space trajectories. In Part II, we consider the transition from linear Resonance Absorption to nonlinear absorption processes in a linear electron density profile as the intensity of the incident radiation increases and the scale length of the density profile decreases. We find that the electron motion excited by an electrostatic field exhibits some extremely complicated dynamics with bifurcations to period doubling and chaotic motion as the strength of the driving field is increased or the density scale length is decreased. We also present some results obtained from particle simulations of these interactions.

In this research, an innovative phased array antenna module is proposed to implement a high-power, high-efficient and compact C-band radio transmitter. The module configuration, which can be integrated into front-end circuits, was designed as planar layers stacked up together to form a metallic cube. The layers were fabricated by using a Computer Numerical Control (CNC) milling machine and screwed together. The antenna parts and the amplifier units were designed at two opposite sides of the cube to spread the dissipated heat produced by the amplifiers and act as a heat sink. Merging the antenna parts with the amplifier circuits offers additional advantages such as decreasing the total power loss, mass, and volume of the transmitter modules by removing the extra power divider and combiner networks and connectors between them as well as reducing the total signal path. To achieve both a maximum possible radiation efficiency and high directivity, the aperture waveguide antenna was selected as the array element. Four antenna elements have been located in a cavity to be excited equally and the cavity is excited through a slot on its underside so a compact subarray is formed. Antenna measurements demonstrated a 15.5 dBi gain and 20 dB return loss at 10 % fractional bandwidth centered around 5.8 GHz and with more than 98% radiation efficiency. The total dimensions of the subarray are approximately 8*12*4 cm3. The outcoming signal from the amplifiers is transferred into the slot exciting the subarray through a microstrip-to-waveguide transition (MWT). A novel and robust MWT structure was designed for the presented application. The MWT was also integrated with a microstrip coupler to monitor the power from the amplifier output. The measured insertion loss of the MWT along with the microstrip coupler was less than 0.25 dB along with more than 20 dB return loss within the same bandwidth of the subarray. The microstrip coupler shows 38 dB of coupling and more than 48 dB of isolation with negligible effects on the amplifier output signal and the insertion/return loss of the MWT. The amplifier subcomponents consist of power combiners/dividers (PCDs), high power amplifiers (HPAs) and bias circuitry. A Monolithic Microwave Integrated Circuit (MMIC) three-stage HPA was designed in a commercially available 0.15 um AlGaN/GaN HEMT technology provided by National Research Council Canada (NRC) and occupies an area of 4.7*3.7 mm2. To stabilize the HPA, a novel inductive degeneration technique was successfully used. To the best of the author’s knowledge, this is the first time this technique has been used to stabilize HPAs. Careful considerations on input/output impedances of all HEMTs were taken into account to prevent parametric oscillations. Other instability sources, i.e. odd-mode, even-mode, and low frequency (bias circuit) oscillations were also prevented by designing the required stabilization circuits. The electromagnetic simulation of the HPA shows 35 W (45.5 dBm) of saturated output power, 26 dB large signal gain and 29% power added efficiency within the same operating bandwidth as the subarray. The output distortion is less than 27 dB, indicating that the HPA is highly linear. The PCD was designed by utilizing a novel, enhanced configuration of a Gysel structure implemented on Rogers RT-Duroid5880. The insertion loss of the Gysel is less than 0.2 dB while return loss and isolation are greater than 20 dB over the entire bandwidth. The same subarray area (8*12 cm2) has been used for the amplifier circuits and up to eight HPAs can be included in each module. All the above parts of the transmitter module were fabricated and measured, except the MMIC-HPA.

abstract: Modular multilevel converters (MMCs) have become an attractive technology for high power applications. One of the main challenges associated with control and operation of the MMC-based systems is to smoothly precharge submodule (SM) capacitors to the nominal voltage during the startup process. The existing closed-loop methods require additional effort to analyze the small-signal model of MMC and tune control parameters. The existing open-loop methods require auxiliary voltage sources to charge SM capacitors, which add to the system complexity and cost. A generalized precharging strategy is proposed in this thesis. For large-scale MMC-embedded power systems, it is required to investigate dynamic performance, fault characteristics, and stability. Modeling of the MMC is one of the challenges associated with the study of large-scale MMC-based power systems. The existing models of MMC did not consider the various configurations of SMs and different operating conditions. An improved equivalent circuit model is proposed in this thesis. The solid state transformer (SST) has been investigated for the distribution systems to reduce the volume and weight of power transformer. Recently, the MMC is employed into the SST due to its salient features. For design and control of the MMC-based SST, its operational principles are comprehensively analyzed. Based on the analysis, its mathematical model is developed for evaluating steady-state performances. For optimal design of the MMC-based SST, the mathematical model is modified by considering circuit parameters. One of the challenges of the MMC-based SST is the balancing of capacitor voltages. The performances of various voltage balancing algorithms and different modulation methods have not been comprehensively evaluated. In this thesis, the performances of different voltage-balancing algorithms and modulation methods are analyzed and evaluated. Based on the analysis, two improved voltage-balancing algorithms are proposed in this thesis. For design of the MMC-based SST, existing references only focus on optimal design of medium-frequency transformer (MFT). In this thesis, an optimal design procedure is developed for the MMC under medium-frequency operation based on the mathematical model of the MMC-based SST. The design performance of MMC is comprehensively evaluated based on free system parameters. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2020

No description available.