High-performance liquid chromatography (HPLC) is the most widely used analysis technique. However, its sensitivity is limited. Sample preconcentration methods, such as fiber-based solid-phase microextraction (SPME) and in-tube SPME (capillary microextraction) offer improved detection limits. It is, however, difficult to couple fiber SPME on-line with HPLC due to the need for complicated desorption devices. Such coupling is further complicated due to the limited solvent stability of the extracting phase both in the fiber and in-tube formats of SPME. In this research, surface-bonded sol-gel sorbents were developed to provide the solvent stability required for effective on-line hyphenation of capillary microextraction (CME) with HPLC. These sol-gel sorbents were prepared using (1) silica-based, (2) titania-based, and (3) germania-based sol-gel precursors. Sol-gel reactions were performed within fused silica capillaries to create a number of organic-inorganic hybrid sorbents in the form of surface-bonded coatings: (1) alkyl (methyl, octyl, octadecyl), (2) polydimethyldiphenylsiloxane, (3) titania poly(tetrahydrofuran), and (4) germania tri-block polymer. The sol-gel coated microextraction capillaries were capable of efficiently extracting a wide variety of analytes, including polycyclic aromatic hydrocarbons, ketones, aldehydes, aromatic compounds, amines, alcohols, and phenols with ng/L to pg/L detection limits. The sol-gel methyl coating demonstrated a counterintuitive ability to extract polar analytes. Sol-gel polydimethyldiphenylsiloxane coatings were found to be resistant to high temperature solvent exposure (150°C and 200°C), making them suitable for use in high-temperature liquid phase separations. To better understand how extraction takes place, effects of alkyl chain length and sol-gel precursor concentration were evaluated in the study on sol-gel alkyl coatings. The sol-gel titania poly(tetrahydrofuran) coating was also capable of extracting underivatized aromatic acids and polypeptides at pHs near their respective isolectric points. The sol-gel titania poly(tetrahydrofuran) coatings and the sol-gel germania tri-block polymer coatings demonstrated impressive resistance to extreme pH conditions, surviving prolonged exposure to 1.0 M HCl (pH approx. 0.0) and 1.0 M NaOH (pH approx. 14.0) with virtually no change in extraction behavior. Sol-gel germania tri-block polymer coatings were also stable under high temperature solvent conditions (200°C). In addition, for the first time, the analyte distribution constants between a sol-gel germania coating and the aqueous samples (Kcs) were determined.

In the course of revitalizing the Poseidon Building in Frankfurt, an energetically optimized façade, made of an architectural concrete was developed. The development of a fiber-reinforced architectural concrete had to consider the necessary mechanical strength, design technology and surface quality. The fiber-reinforced architectural concrete has a compressive strength of 104.1 MPa and a 3-point bending tensile strength of 19.5 MPa. Beyond that, it was ensured that the fiber-reinforced high-performance concrete had a high durability, which has been shown by the capillary suction of de-icing solution and freeze thaw test with a weathering of abrasion of 113 g/m² after 28 freeze-thaw cycles and a mean water penetration depth of 11 mm.

Fumonisins, carcinogenic mycotoxins produced by various Fusarium species, occur naturally in maize and maize-based food products. They are hazards for animal and human health as they cause cancer in rodents and have been associated with oesophageal cancer and neural tube defects in humans. The most abundant naturally occurring fumonisins analogues in maize are fumonisin B1, B2 and B3 (FB1, FB2 and FB3). For analytical determination, they mostly require suitable extraction, clean-up and pre or post-column derivatization together with reversed-phase HPLC separation. o- Phthaldialdehyde (OPA) had been adopted as the most widely used derivatization reagent for fumonisins as they lack useful chromophores or fluorophores. Alternative derivatization reagents, naphthalene-2,3- dicarboxaldehyde (NDA) and dansyl chloride (DnS-Cl), were investigated in this study

Fumonisins, carcinogenic mycotoxins produced by various Fusarium species, occur naturally in maize and maize-based food products. They are hazards for animal and human health as they cause cancer in rodents and have been associated with oesophageal cancer and neural tube defects in humans. The most abundant naturally occurring fumonisins analogues in maize are fumonisin B1, B2 and B3 (FB1, FB2 and FB3). For analytical determination, they mostly require suitable extraction, clean-up and pre or post-column derivatization together with reversed-phase HPLC separation. o- Phthaldialdehyde (OPA) had been adopted as the most widely used derivatization reagent for fumonisins as they lack useful chromophores or fluorophores. Alternative derivatization reagents, naphthalene-2,3- dicarboxaldehyde (NDA) and dansyl chloride (DnS-Cl), were investigated in this study

Masters of Science / Fumonisins, carcinogenic mycotoxins produced by various Fusarium species, occur naturally in maize and maize-based food products. They are hazards for animal and human health as they cause cancer in rodents and have been associated with oesophageal cancer and neural tube defects in humans. The most abundant naturally occurring fumonisins analogues in maize are fumonisin B1, B2 and B3 (FB1, FB2 and FB3). For analytical determination, they mostly require suitable extraction, clean-up and pre or post-column derivatization together with reversed-phase HPLC separation. o- Phthaldialdehyde (OPA) had been adopted as the most widely used derivatization reagent for fumonisins as they lack useful chromophores or fluorophores. Alternative derivatization reagents, naphthalene-2,3- dicarboxaldehyde (NDA) and dansyl chloride (DnS-Cl), were investigated in this study. / South Africa

This Master Thesis compares three various concrete materials for stiffening orthotropic bridge deck plate and investigates stress reducing factors in selected weld joints. The thesis investigates the standard load situation and also overloaded situation. A parameter study with different material inputs has been done to see how it affects stress in weld joints.

In the course of revitalizing the Poseidon Building in Frankfurt, an energetically optimized façade, made of an architectural concrete was developed. The development of a fiber-reinforced architectural concrete had to consider the necessary mechanical strength, design technology and surface quality. The fiber-reinforced architectural concrete has a compressive strength of 104.1 MPa and a 3-point bending tensile strength of 19.5 MPa. Beyond that, it was ensured that the fiber-reinforced high-performance concrete had a high durability, which has been shown by the capillary suction of de-icing solution and freeze thaw test with a weathering of abrasion of 113 g/m² after 28 freeze-thaw cycles and a mean water penetration depth of 11 mm.