Global ETD Search

1	Statistické řízení kvality v procesu pájení vlnou ve společnosti Honeywell, spol. s r.o. - Brno o.z. Jančová, Michaela January 2013 (has links) No description available.
2	Výroba plynových ventilů na automatické lince / Production of gas valves on the automatic line Pešl, Milan January 2011 (has links) This thesis deals with the evaluation of manufacturing gas valves on the automatic line and the design of CCTV systems to detect errors at assembly in Honeywell Czech Republic Ltd. The aim of this thesis is mutual comparison of the respective proposed options of the camera system, their optimal selection, and the evaluation of detected errors of the line by using Pareto Charts. An integral part of this work is a brief description of the automatic line for gas valves and the history of Honeywell Company.
3	Návrh napájecí části pro ADAHRS / Design of power supply for ADAHRS Andrysík, Lukáš January 2016 (has links) This master’s thesis contains basic description od ADAHRS system, DO-160 standard and mainly focuses on power supply desing with supercapacitors backup. It initialy deals with power supply requirements and continues with block diagram and multiple 5 V supply solutions. For selected 5 V supply it describes more deeply its properities and options. As the main theme it deals with providing power supply backup using supercapacitors – selecting particular method and configuring supercapacitor charging/discharging controller. It also includes tolerance and stress analysis of the components used in design. Lastly it describes testing of the final product.
4	Streamlining logistics management processes in Honeywell, spol. s r.o. -- Brno~o.z. company Bejčková, Jana January 2014 (has links) This piece of work is focused on getting particular logistics management process streamlined and on reasonable recommendations leading to improvement of the current state in any logistics company. In accordance with the thesis objective, respective working hypothesis is defined: "The correct implementation of the replenishment method as far as inventory management in a logistics company is concerned contributes to the reduction of the stock." The application of results is performed on the manufacturing site Honeywell Brno. The first section of the thesis explains logistics and its tools, processes within material and inventory management and other related theoretical issues. Further, methods that have been applied are described. Main part is focused on the streamlining the production process in the company using calculations that respect factors directly influencing a level of the stock. The comparison of Kanban and Kitting system is provided too. Last part is discussing the obtained results, their expected economic consequences and recommendations for potential implementation in logistics chains elsewhere.
5	Design and implementation of a DSP-based control interface unit (CIU) Kavousanos-Kavousanakis, Andreas 03 1900 (has links) Approved for public release, distribution is unlimited / This research involves the development of a human-body motion tracking system constructed with the use of commercial off-the-shelf (COTS) components. The main component of the system investigated in this thesis is the Control Interface Unit (CIU). The CIU is a component designed to receive data from the magnetic, angular rate, and gravity (MARG) sensors and prepare them to be transmitted through a wireless configuration. A simple and effective algorithm is used to filter the sensor data without singularities, providing the measured attitude in the quaternion form for each human limb. Initial calibration of the MARG sensors is also performed with the use of linear calibrating algorithms. The testing and evaluation of the whole system is performed by MATLABÊ¼ and SIMULINKÊ¼ simulations, and by the realtime visualization using a human avatar designed with the X3D graphics specifications. Through this research, it is discovered that the MARG sensors had to be redesigned to overcome an erratum on the Honeywell magnetometer HMC1051Z data sheet. With the redesigned MARG sensors, the testing results showed that the CIU was performing extremely well. The overall motion tracking system is capable of tracking human body limb motions in real time. / Lieutenant Junior Grade, Hellenic Navy Detectors Avatars (Religion) Motion Electrical engineering MARG III sensor Control interface unit (CIU) One- Three- Sixteen-Channel CIU Avatar Virtual environment Virtual training Immersion Honeywell Analog devices Texas Instruments Microcontoller Micromachined sensor X3D Java Xilinx RS232 Wireless communication WISER 2400
6	Design For Six Sigma / Design For Six Sigma Greplová, Kristýna January 2012 (has links) The aim of the master’s thesis is analysis of practical application limits of waste-gate TwinScroll turbocharger located in BMW X6 M vehicle by using DFSS (Design For Six Sigma) tools. The goal is to create a special measurement device for a measurement of waste gate leakage with chance of testing all sorts of characteristics having impact on key parameters of turbocharger.
7	Investigation of magnetic sensors and hardware design of a sensor platform for human-computer interaction purposes Forsmark, Christopher January 2017 (has links) Company A develops algorithms and hardware for the application of magnet tracking, to be able to use a dipole magnet as an interaction tool between humans and computers. This master thesis investigates the available magnetic sensors through a market survey and practical testing of a selection of the sensors in purpose to determine the most suitable magnetic sensor and magnetic sensor technology for the application of magnet tracking. With the most suitable sensor found in the investigation, a sensor platform is designed and manufactured. The sensor HMC5983 from Honeywell is found to be the most suitable sensor and is designed into the sensor platform, which also includes ,for instance, a wireless MCU, CC2640 from Texas Instru- ments, together with a PCB antenna and a PSU including a battery charger, BQ24075 from Texas Instruments. The most suitable mag- netic sensor technology was found to be magnetoresistive sensors. The sensor platform was designed according to the requirements and is working good enough to enable company A to start testing their algorithms for magnet tracking on the new platform. magnetic sensor sensor PCB sensor network texas instruments cc2640 bq24075 hmc5983 human-computer interaction inverted-f antenna honeywell magneto resistive hardware emc Övrig annan teknik
8	Simulace kombinace dvou kniplů Active Side Stick a algoritmus potlačení pilotem indukovaných oscilací / Twin Active Side Stick Configuration Model and Pilot-Induced Oscillations Suppression Algorithm Vadlejch, Filip January 2012 (has links) Diplomová práce se zabývá představením, popisem a vytvořením modelu postranní řídicí páky pilota s aktivní silovou zpětnou vazbou firmy Honeywell International Inc. v prostředí MATLAB Simulink. Dále pak představením problému pilotem indukovaných oscilací a možnostmi jejich předcházení, detekce a potlačení. Model řídicí páky se silovou zpětnou vazbou je použit pro potlačení detekovaných oscilací v simulaci letounu.

Search results