The Master's thesis dealt with the project new construction hotel in the village of Kvilda, district Prachtice. Mountain object is used for accommodation and meal serving of guests and its accommodation capacity is 50 reviews. The building is partly basement with three floors. The support system is made up in the basement of formwork blocks and in the overhead floors ceramic blocks, which are supplemented by insulation system Porotherm with Styrofoam. Object is an irregular floor plan and is covered with a single layer flat roof. In addition to fire safety, the work addresses the project documentation as well as an assessment of the proposal of concrete constructions and solves the heat heating object too.

This master´s thesis deals with the design of the Mountain hotel with restaurant. The project is elaborated in the form of an implanting-level documentation. The object is situated at the land parcel No.115/5 in village cald Červená voda. The object is designed as tree-storey with the partially cellarage, the roof is propose as saddle roof.

Master´s project solve design of Mountain Pension With Restaurant . The construction system is wood column forming frame, the 2by4 system. The building has three floors and roofed by sadlle roof with dormers. The roof has two levels. There is also green roof in building. The structure is based on pads foundations. Something extra is using of gabion wall to ventilate the space around pads.

The objective of this thesis is to create the documentation for building construction. Designed building is a mountain guesthouse. Building plat is located in the cadastral Poteč. Project documentation has been prepared in accordance with applicable laws, regulations and standards. The object is designed as one floor building with basement and residential loft and is fitted in sloping terrain. The building is shaped in layout L with the longest plane dimensions 40,11 x 39,05 m. Foundations are designed as strips of plain concrete. The building is designed as a wall support system. Wall system is combined of shuttering blocks filled with concrete, ceramic brick blocks and wood timbering. Roofed building is realized through the roof with a vertical stool. The ceiling above the ground floor is designed as a reinforced concrete slab ceiling and above the first floor as the timber.

This diploma thesis solves the project of four-storey, partly cellared mountain pension situated in the plant number 645/2 in the cadastral area in Deštné in Orlické hory. The building has a capacity of 44 seats to accommodate 72 persons in the restaurant and 57 persons in the wellness center. There is a wellness center with fitness room and engine room of air-conditioning system in the basement. There is an entrance hall with hotel base, restaurant, sanitary facilities and utility room with boiler room on the first floor. The second and third floor is designed for accommodation. There is an outdoor terrace of restaurant. The building has a load-bearing wall system. The load-bearing walls and the partition walls are bricked up of the porous concrete YTONG bricks and sand-lime bricks SILKA. The walls are insulated of mineral wool thickeness 200 mm and EPS Perimeter thickeness 140 mm underground section and plinth area. The ceiling structure are made of the prestressed hollow core panels spiroll thickness 250 mm and wooden beamed ceiling. There is a saddle wooden roof. The windows and the doors are made by the company Progress. The part of facade of the building is ventilated. This project is designed by the computer software ArchiCAD.

The subject of my thesis is the design of new mountain hotel based on wood, which is located at the top of Little Maple, cadastral area Trinec-Tyra, the city of Trinec, Frydek-Mistek level documentation for construction. The building has a partial basement, with three floors. The supporting system consists of three structural systems. The structural system consists of basement formwork, the first floor is made of ceramic blocks heluz, second and third floor is designed as a timber frame panel. Roof structure is made up of lattice wood trusses and gabled aisle. Proposal mountain hotel respects the territorial plan of Trinec. Furthermore, emphasis is placed on the layout, including ensuring the design to the static, architectural, energy savings and safety in the use of the building.

The thesis focuses on a project of a mountain hotel. Hotel is located in the area Jeseník, altitude of 550 m. It is detached hotel with a rectangular ground plan with one underground floor and four above ground floors. In the basement is the engine room ventilation, bikes room and in the second part of the underground is wellness center. On the first floor is a restaurant. In the other floors are hotel rooms for 1 to 3 person. On the fourth floor are two apartments. The hotel is based on the monolithic footings.In the basement the vertical supporting are from concrete. Other vertical supporting are built from bricks Porotherm 30, which is insulated and ventilated facade with laggin 150 mm. Supporting horizontal structures are made of monolithic reinforced concrete. The building is covered with a double skin roof structure made of wooden trusses.

Katechetické aspekty v díle Rudolfa Horského Catechetical Aspects in the Work of Rudolf Horský Bc. Eliška Chottová Rudolf Horský, a theologian, catechist, bishop of the Czechoslovak Church, professor and dean of the Hus Czechoslovak Theological Faculty in Prague left behind, among other things, his works on catechetical themes. These works, which include, for example, How to Work with Children (Handbook for Religious Teachers and Volunteer Lay Preachers), How to Work with Youth, and A Child in the Living Church, can still be beneficial for working in the church today, especially in religious education of children and youth. The central point of Rudolf Horský's catechetical activities were the Sunday Schools and the Youth Union, that is the institutions aimed at religious education for children and youth. Horský, of course, emphasized the methods that should be used not only in religious teaching, which is also related to the character of the preacher, or a religious educator, i.e. a teacher, who should be properly educated not only in the given issue, but also in the child's soul, in order for the teaching to be as effective as possible. 1

The subject of this diploma thesis is dealing with a construction-technological project of a hotel in Dolní Lomná. The main subject of this thesis is a technological report, coordination situation of the construction with broader relations to transport routes, a time and financial plan of the construction, a feasibility study of the main technological phases, a project of the site equipment, a suggested list of the main construction vehicles and building mechanisation, a time-schedule plan, a plan of material resources, a technological regulation for the implementation of monolithic ceilings, control and test plan, health and safety at work and a technological regulation for the implementation of rider bracing with economic balance. Part of the work is the itemized budget and calculating to THU.

The subject of this thesis was a structural design of a timber structure of a mountain hotel in Králíky. The object was a three storey building in a shape of letter U. The project was made in two different variations. The first one consisted of timber frame system with walls securing spacial stability. Computational model was created as a spacial bar 3D model in SCIA Engineer 19.1. The internal forces were calculated using the linear static analysis. The loadbearing structure was designed according to ultimate and serviceability limit states in SCIA Engineer 19.1. The thesis includes joints and anchorage design according to valid standards. Glue laminated timber was chosen as a material for the loadbearing structure while solid timber was chosen for wall structures. The second variation was made out of cross laminated panels. Wall panels were calculated by hand calculation whereas floor and roof panels were calculated using Agrop Nova Element software. Spatial model was made in SCIA Engineer 19.1 software to design joints and for global deformation check as well. The thesis includes engineering report, structural design report as well as drawings.