This master thesis deals with classification of sleep stages on the base of polysomnographic signals. On several signals was performed analysis and feature extraxtion in time domain and in frequency domain as well. For feature extraxtion was used EEG, EOG and EMG signals. For classification was selected classification models K-NN, SVM and artifical neural network. Accuracy of classifation is different depending on used method and spleep stages split. The best results achieved classification among stages Wake, REM, and N3, with neural network usage. In this case the succes was 93,1 %.

The current persistent drought and changes in the climate system have raised water managers expert questions about how to manage water resources in the future. The manifestation of climate change in hydrological series and their influence on the magnitude of threats to the storage functions of reservoirs are more often investigated. Already today, long-term shortages of storage capacity in reservoirs lead to the introduction of special manipulations on water structures. The aim of the thesis is to perform the analysis of time series, respectively decomposition of hydrological series average annual and monthly discharges. Create extended hydrological bases using synthetic discharge series generators and develop a comprehensive analysis of storage volume without considering losses even with the introduction of losses from the water surface vapor in the UNCE RESERVOIR program. The created discharge series are compared and evaluated on the basis of statistical characteristics and reservoir storages results with the real discharge series. The practical app is conducted on the Vranov reservoir in the Dyje River Basin.

Energetická náročnost a ekonomická životaschopnost jsou často skloňované pojmy spojené s aquaponickým způsobem produkce potravin. Tato práce si klade za cíl nalézt opatření, která by zvýšila ziskovost podnikání v oblasti aquaponie a zároveň by snížila energetickou náročnost procesu a spotřebu dalších zdrojů. Součástí práce je následné ověření vybraných opatření na zkušební aquaponické farmě. K vyřešení otázky úspory energie a vody byly použity optimalizační metody vycházející z procesního inženýrství. Pro účely automatického monitoringu růstu rostlin, jakožto hlavního zdroje příjmů v aquaponii, byla využita technologie počítačového vidění. Za využití optimalizační metody zvané P-graph, integrace procesů a hledání procesních alternativ bylo nalezeno nejlepší možné uspořádání procesní sítě, které vykazovalo více než devítinásobný čistý roční příjem ve srovnání se současným uspořádáním procesních zařízení v aquaponické farmě. Dalších úspor energie a vody bylo dosaženo instalací reflexních fólií na okraje pěstebních boxů a dalším využitím odpadní vody z aquaponické části farmy v hydroponické sekci určené k pěstování sazenic. Tato opatření mohou napomoci aquaponickým farmám zvýšit konkurenceschopnost a snížit jejich dopad na životní prostředí.

This master thesis deals with the planning of routes and their operating parameters for the tram network in the new Brno city masterplan. The work evaluates operational and capital expenses that are bound up with running and further expanding of the tram system. The numbers of inhabitants and jobs included in 300-meter zones around tram stops were assessed. The calculated values are compared with the current situation. Based on the results, a suitable composition of the vehicle fleet and the order in which new tracks should be constructed is recommended. Further measures are proposed to improve coverage of city territories by the tram system, especially construction of tram ways to other densely populated areas of Brno and the organization of selected transfer points

This master's thesis deals with data processing for an electrodynamic test bench. The thesis presents a theoretical overview of signal distribution, determination of fatigue damage from random vibrations and a description of test benches. The next part deals with setting up the test time reduction in GlyphWorks software. The aim of this thesis is to process and create a procedure for an accelerated fatigue test from data measured during an operational test on a polygon. The data are then verified on an electrodynamic test rig using a Skoda Auto dynamic test room. The final part of the thesis contains data evaluation and a guide explaining how to easily create a test in the relevant software.

This thesis deals with the study of parameters of diaphragm discharge in liquids. NaCl solution of different conductivity was used as a conductive medium. Conductivities were adjusted in the range from 220 to 1000 µS cm-1. Two diagnostic methods were used for the study of plasma parameters. The first one was employed in the laboratory of plasma chemistry at Faculty of Chemistry, Brno University of Technology, namely the optical emission spectroscopy. The second method used for plasma diagnostics was the time resolved ICCD camera at the Laboratoire de Physique des Plasmas at the École Polytechnique in Paris. The reactor for the diagnostics by optical emission spectroscopy had the volume of 4 l, and it was made of polycarbonate. PET diaphragm was placed in the barrier separating the cathode and the anode space. Electrodes were made of titanium coated with platinum. Electric power source supplied a constant DC voltage of maximum 5 kV and electric current up to 300 mA. Spectrometer Jobin Yvon TRIAX 550 with CCD detector was used during the experiments in order to measure overview spectra within the range from 200 to 900 nm as well as OH molecular spectra and Hß line spectra. All spectra were scanned in both discharge polarities, i.e. at the cathode and the anode part of reactor. The basic parameters of the discharge plasma were calculated from the spectra, that means rotational and electron temperature and electron density. Another part of experiment consisted of measurements by the ICCD camera iStar 734. Two types of reactors were used. The first one was the same as the reactor for the measurements by the optical emission spectroscopy. The second one was also made of polycarbonate, but the volume of conductive solution was 110 ml, only. HV electrodes made of stainless steel were placed in this reactor. Ceramic diaphragm (Shapal-MTM) was used in both reactors. Diaphragms had different thickness and diameter of holes. ICCD camera acquired photographs with details of processes of the bubbles generation and discharge operation (propagation of plasma channels), depending on solution conductivity, dimensions of the diaphragm, and with respect to the electrode part of the reactor.

The main goal of this Master’s thesis is to describe relationship between low frequency noise spectral characteristics of Cadmium-Telluride radiation detectors depending on applied voltage and detectors reaction to illumination of various wavelengths. Also, the reaction and influence of higher operating temperatures were investigated. The noise measurements shown that the dominant noise type at low frequencies is the 1/f noise. Several samples with different resistivity were tested. By comparing results, we are able to estimate the quality of detectors and their sensibility to illumination and higher operating temperatures. We have found that all the studied CdTe detectors are sensitive to one particular wavelength of 548nm. Resulting data were processed by EasyPlot program that provided graphical representation of spectral noise characteristics. All measured characteristics of tested samples are compared and it’s estimated the similarity between the samples.

This Master's thesis deals with the influence of breathe to baroreceptor reflex. The first chapter is focused on measuring of blood pressure, in reference to later used method. In the second part is detailed analysis and explanation of term baroreflex, relationship between frequency spectra of systolic blood pressure, heart rate and breathing, mechanisms of regulation of blood pressure and heart rate variability. Third chapter deals with possible ways, how to analyze data, which are needed for estimation of baroreflex sensitivity, analyze of heart rate variability and estimation of power spectral density. Next parts of this thesis is paid attention to technical equipment and methods of acqusition of data, using this equipmnent. Part of this work is also software application, which makes possible from the recorded data estimate baroreflex sensitivity.

Securing of electrical devices is important not only to protect against destruction under the effects of electric current, but also for protection of people or animals against electric shock. With increasing of living standards goes hand in hand increasing of the electricity consumption. Therefore In the grid of low voltage, there are increasing short-circuit currents. With improving technology is posed considerable demand on the performance, security and switching capacity of circuit breakers. This thesis is oriented on development of thermal and electromagnetic switch of circuit breaker on which is put a big demand in development of new types of circuit breakers. The thesis is interesting because of comprehensive use of circuits’ breakers since it can be used in AC and DC networks with frequency of 50 Hz and 400 Hz.

This work deals with the classification and diagnosis of electrical insulating liquids. Furthermore, the theoretical part describes the mathematical and physical principles of these liquids. The automated workplace was compiled with development environment VEE Pro for measurement of viskosity and control thermostat medingen and modifiable components for measuring complex permittivity in the frequency range. In the experimental part was carried out measurements of selected material parameters, investigated the effect of difficult conditions and made the mathematical evaluation of physical phenomena.