Microfluidics covers the science of manipulating small quantities of fluids using microscale devices with great potential in analysis, multiplexing, automation and high-throughput screening. Compared to conventional systems, microfluidics benefits from miniaturization resulting in shortened time of experiments, decreased sample and reagent consumptions as well as reduced overall costs. For microfluidic devices where further weight and cost reduction is additionally required, stimuli-responsive hydrogels are particularly interesting materials since they can convert an environmental stimulus directly to mechanical work without any extra power source. Hydrogels are used as chemostats, micropumps, and chemo-mechanical valves in microfluidics. Existing studies about hydrogels for flow control reported on hydrogels responsive to only one stimulus, including temperature, pH value, and solvent. Combining temperature and pH stimuli within one material is an interesting approach, which allows internal as well as external flow control and broadens potential applications. Among the variety of temperature- and pH-responsive monomers, N-isopropylacrylamide (NiPAAm) and acrylic acid (AA) are considered as ideal building blocks to obtain a hydrogel with pronounced stimuli response. There are different architectures for realizing a temperature- and pH-responsive hydrogel with NiPAAm and AA (e.g. copolymer gels, interpenetrating polymer networks (IPNs), semi-IPNs, or graft copolymer gels). Each approach has its inherent benefits and disadvantages. Grafted hydrogels with a temperature-responsive backbone and pH-responsive graft chains are a promising architecture overcoming drawbacks of copolymer gels (loss of thermoresponsive behavior due to the comonomer), interpenetrating polymer networks (IPNs, difficult fabrication of structured particles via soft lithography), and semi-IPNs (leakage of penetrating polymer). However, studies about multi-responsive grafted hydrogels for flow control in microfluidics are comparatively rare and further research is needed to emphasize their real potential. For this reason, the overall aim of this work was the synthesis of temperature- and pH-responsive grafted hydrogels based on NiPAAm and AA for flow control in microfluidics. This required the synthesis of a pH-responsive macromonomer by RAFT polymerization. As a suitable chain transfer agent with a carboxylic acid group for an end-group functionalization, 2-(dodecyl-thiocarbonothioylthio)-2-methylpropionic (DTP) acid was employed. The approach towards the synthesis of the pH-responsive macromonomer based on two key steps: (i) attaching a functional group, which retains during RAFT polymerization, and (ii) conducting the RAFT polymerization to synthesize the pH-responsive macromonomer. In total, four functionalizations for the macromonomer were investigated, including allyl, unconjugated vinyl, acrylamide, and styrene. End-group analysis and solubility tests revealed that macromonomers with a styrene functionalization are suitable for the synthesis of graft copolymer gels. A series of grafted net-PNiPAAm-g-PAA-styrene hydrogels with a PNiPAAm backbone and PAA-styrene graft chains (Mn = 4200 g/mol, Mw/Mn = 1.6) were prepared and characterized. The main goal was to identify suitable stimuli for an application as a chemo-mechanical valve and to show reversibility of the swelling and shrinking process. Importantly, the temperature sensitivity should be retained, while a pH response needs to be introduced. Equilibrium swelling studies quantified with the response ratio revealed that a grafting density of PAA-styrene between 0.25 and 1 mol-% provides a suitable response towards temperature, pH, salt, and solvent. Furthermore, the swelling and shrinking process is highly reproducible over four consecutive cycles for all four stimuli. In order to evaluate the swelling kinetics of grafted net-PNiPAAm-g-PAA-styrene hydrogels, the collective diffusion model extended by a volume specific surface was applied. The determined cooperative diffusion coefficients of net-PNiPAAm-g-PAA-styrene indicated faster response time with increasing PAA-styrene content. Remarkably, net-PNiPAAm-g-PAA-styrene containing 1 mol-% PAA-styrene exhibited an accelerated swelling rate by a factor of 9 compared to pure net-PNiPAAm. Rheological analysis of net-PNiPAAm-g-PAA-styrene showed that an increasing graft density leads to decreasing mechanical stability. The photopolymerization experiments showed that the gelation time linearly increases with the grafting density. Grafted net-PNiPAAm-g-PAA-styrene hydrogels were tested in two fluidic setups for flow control. A straightforward fluidic platform was developed consisting of a fluid reservoir, an inlet channel, an actuator chamber and an outlet channel. The actuator chamber was filled with crushed hydrogel particles. Accordingly, the fluid flow was directed by the active resistance of the hydrogel particles in the actuator chamber (i.e. swelling degree) and allowed flow control by the local environmental conditions. Flow rate studies showed that the fluid flow throttles when the inlet channel was provided with a solution in which the hydrogel swells (pH 9 buffer solution at room temperature). In contrast, the hydrogel-based valve opens immediately when a solution was used in which the hydrogel collapses. The advantageous properties of net-PNiPAAm-g-PAA-styrene were highlighted by using pH, salt and solvent stimulus in one experiment. Remarkably, the opening and closing function was reversible over six consecutive cycles. As part of a collaboration project with the chair of polymeric microsystems within the Cluster of Excellence Center for Advancing Electronics Dresden (A. Richter and P. Frank), membrane assures hydraulic coupling in a chemo-fluidic membrane transistor (CFMT) and grafted net-PNiPAAm-g-PAA-styrene hydrogels were combined to emphasize the potential of both systems. Flow rate studies showed that 4 different stimuli can be used to control the opening and closing state of the CFMT. Multiple opening and closing cycles revealed no considerable changes in the valve function emphasizing a high potential for an application in microfluidics.

Stimuli sensitive polymers and hydrogels respond with large property changes to small physical and chemical stimuli (e.g. temperature, pH, ionic strength). The bulk behavior of these polymers is widely studied and they show an isotropic swelling. However, thin hydrogel layers of polymers on a substrate show a swelling behavior, which is constrained in some way. Therefore, size, confinement, patternability, response time and transition temperature of thin hydrogel layers are the most important parameters in technological applications and this study focuses on the investigation of these above-mentioned parameters. The aim of this study involves synthesis, characterization and application of thin photo-crosslinked hydrogel layers. Dimethylmaleimide (DMI) moiety was incorporated in the polymers chains and was used to introduce photo-crosslinking by [2+2] cyclodimerization reaction in the presence of UV irradiation. The following photo-crosslinkers based on DMI group were synthesized ? - Acrylate photo-crosslinker (DMIAm) - Acrylamide photo-crosslinker (DMIAAm) - Polyol photo-crosslinker (DMIPA, DMIPACl) The conventional free radical polymerization of above listed photo-crosslinker with its respective monomer resulted in formation of photo-crosslinkable polymers of (a) HEMA, (b) DMAAm, (c) NIPAAm/DMAAm, (d) NIPAAm/Cyclam. The properties of these polymers were investigated by NMR, UV-VIS spectroscopy, GPC and SPR. Thin hydrogel layers were prepared by spin coating on gold-coated LaSFN9 glass. The covalent attachment to the surface was achieved through an adhesion promoter. Swelling behavior of the thin polymer layers was thoroughly investigated by Surface Plasmon Resonance (SPR) Spectroscopy and Optical Waveguide Spectroscopy (OWS). SPR and OWS gave a wide range of information regarding the film thickness, swelling ratio, refractive index, and volume degree of swelling of the thin hydrogel layer. For hydrophilic photo-crosslinked hydrogel layers of HEMA and DMAAm, it was observed that the volume degree of swelling was independent of temperature changes but was dependent on the photo-crosslinker mol-% in the polymer. These surface attached thin hydrogel layer exhibited an anisotropic swelling. For NIPAAm photo-crosslinked hydrogel layers with DMAAm as a hydrophilic monomer, it was observed that both transition temperature (Tc) and volume degree of swelling increases with increase in the mol-% of DMAAm. To study the effect of film thickness on Tc and volume degree of swelling, hydrogels with wide range of film thickness were prepared and investigated by SPR. These results provided vital information on the swelling behavior of surface attached hydrogel layer and showed the versatility of SPR instrument for studying thin hydrogel layers. Later part of project involved synthesis of multilayer hydrogel assembly involving a thermoresponsive polymer and a hydrophilic polymer. The combination of two layers with photo-crosslinkable DMAAm polymer as base layer and photo-crosslinkable NIPAAm polymer as top layer formulate a multilayer assembly where, the base layer only swells in response to temperature and the top layer shows temperature dependent swelling. Photo-crosslinked hydrogel layers of NIPAAm, DMAAm and HEMA shows a high-resolution patterns when irradiated by UV light through a chromium mask. At last this study focused on an important application of these hydrogel layers for cell attachment processes. Cell growth, proliferation and spreading shows a biocompatible nature of these hydrogel surfaces. Such thermoresponsive photo-crosslinkable multilayer structure forms bases for future projects involving their use in actuator material and cell-attachment processes.

Switchable hydrogel-layered composite membranes can be used for the analysis of particle size distributions. This functionality is provided by pores with controllable diameter. In order to obtain a device that can be used to measure the cell size distribution in native biological samples, lots of switchable pores are required. In the current work, we model and simulate the mechanical behavior of active composite membranes with switchable pores. This is done in order to find the maximum number of pores that can be integrated into a membrane without cross-influencing effects on the actuation of the pores. Therefore, we investigate (1) the interaction of active pores inside the multifunctional composite and (2) the membrane bending under microfluidic pressure load. We show that through miniaturization, sufficient pores can be added to a permeation control membrane for processing native blood samples. The envisioned device allows a parallelized measurement of cell sizes in a simple lab-on-a-chip setup.

For everyday cycling, one needs to carry rainproof clothing just for the case of unexpected downpours. In the present research, we present a concept for a helmet which is automatically rainproof when the rain starts. When the sun comes out, the helmet is breathable again even before it completely dries up. This functionality is provided by active hydrogel meshes. Hydrogel meshes offer great advantages due to their ability to change the aperture size with swelling and deswelling. In our current work, we present the design and modeling steps for hydrogel-layered active meshes which use (i) swelling and deswelling in hydrated state and (ii) swelling starting from the dry state. The main goal is to close the air openings of a bicycle helmet when rain starts as an automatic rainproofing. This can be achieved through the swelling of the hydrogel pNiPAAM-co-chlorophyllin in the meshes, which leads to closing when hydrated. At the same time, the light-sensitive behavior leads to opening of the apertures under direct sun exposure, i.e. when the sun appears again after the rain. We present the steps of modeling and design using the Normalized Extended Temperature-Expansion-Model (NETEM) to perform simulations in Abaqus. The model is capable of describing both the swelling of the hydrogel under light stimulus and the volume change due to hydration. It is based on the analogy between free swelling and thermal expansion and defined for nonlinear displacements. We also discuss the fabrication process of hydrogel-layered fibers and challenges in their application and simulation. As a proof of concept for hydrogel-layered meshes, we show preliminary experimental results of a poly(acrylamide)/poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAAm/PAMPS) hydrogel with semi-interpenetrated network (SIPN) structure and its swelling capacities on a mesh. Starting from the active hydrogel meshes as presented in the current work, the next step can be smart textiles that harness the power of hydrogels: the adaptation to combinations of stimuli - like humidity, temperature and brightness - that define environments.

Im Mittelpunkt dieser Arbeit stand die Darstellung sensitiver Blockcopolymere und deren Gele, die als Ausgangsmaterialien in Sensor- und Aktorsystemen einsetzbar sind. Die Vereinigung verschiedener Ansprechparameter stellt erhöhte Anforderung an die Synthese. Geringe Ansprechzeiten lassen sich mit einer Gelgröße im µm-Bereich erreichen. Hydrogele dieser Größenordnungen können durch nachträgliche Vernetzung funktioneller linearer Polymere ermöglicht werden. Die Makroinitiatormethode ermöglichte den Aufbau verschiedener linearer photovernetzbarer Blockcopolymere. Zum Einen wurde das temperatursensitive P(n-BuAc)-block-P(PNIPAAm-co-DMIAAm) erhalten, des Weiteren gelang die Darstellung der multi-sensitiven Blockcopolymere P2VP-block-P(NIPAAm-co-DMIAAm) und P4VP-block-P(NIPAAm-co-DMIAAm). Die Blockcopolymere wurden mit variierenden Blocklängen und Verhältnissen sowie mit unterschiedlichem Vernetzergehalt dargestellt. Die Charakterisierung der Blockcopolymere erfolgte mittels 1H-NMR-Spektroskopie, GPC-Messungen (Zusammensetzung) und DSC-Messungen (thermische Eigenschaften). Das Löslichkeitsverhalten in wässrigen Medien wurde durch Dynamische Lichtstreuung bestimmt. Die Beschreibung des Quellverhaltens der vernetzten Schichten erfolgte durch vornehmlich durch optische Methoden (SPR/OWS, WAMS, Ellipsometrie). Die Veränderung des E-Moduls in Abhängigkeit äußerer Parameter konnte mittels AFM untersucht werden. Die Reaktion der Schichten wurde gegenüber Temperatur, pH-Wert und Salzkonzentrationen getestet. Die charakterisierten Filme konnten im Anschluss als sensitive Schichten in piezoresistiven Sensorsystemen verwendetet werden.

No description available.

Switchable hydrogel-layered composite membranes can be used for the analysis of particle size distributions. This functionality is provided by pores with controllable diameter. In order to obtain a device that can be used to measure the cell size distribution in native biological samples, lots of switchable pores are required. In the current work, we model and simulate the mechanical behavior of active composite membranes with switchable pores. This is done in order to find the maximum number of pores that can be integrated into a membrane without cross-influencing effects on the actuation of the pores. Therefore, we investigate (1) the interaction of active pores inside the multifunctional composite and (2) the membrane bending under microfluidic pressure load. We show that through miniaturization, sufficient pores can be added to a permeation control membrane for processing native blood samples. The envisioned device allows a parallelized measurement of cell sizes in a simple lab-on-a-chip setup.

The development of therapies promoting recovery after spinal cord injury is a challenge. Alginate hydrogels offer the possibility to develop biocompatible implants with mechanical properties tailored to the nervous tissue, which could provide a permissive environment for tissue repair. Here, the effects of non-functionalized soft calcium alginate hydrogel were investigated in a rat model of thoracic spinal cord hemisection and compared to lesioned untreated controls. Open field locomotion tests were employed to evaluate functional recovery. Tissue analysis was performed with label-free multiphoton microscopy using a multimodal approach that combines coherent anti-Stokes Raman scattering to visualize axonal structures, two-photon fluorescence to visualize inflammation, second harmonic generation to visualize collagenous scarring. Treated animals recovered hindlimb function significantly better than controls. Multiphoton microscopy revealed that the implant influenced the injury-induced tissue response, leading to decreased inflammation, reduced scarring with different morphology and increased presence of axons. Demyelination of contralateral white matter near the lesion was prevented. Reduced chronic inflammation and increased amount of axons in the lesion correlated with improved hindlimb functions, being thus relevant for locomotion recovery. In conclusion, non-functionalized hydrogel improved functional outcome after spinal cord injury in rats. Furthermore, label-free multiphoton microscopy qualified as suitable technique for regeneration studies.

Membranes separate uid compartments and can comprise transport structures for selective permeation. In biology, channel proteins are specialized in their atomic structure to allow transport of specific compounds (selectivity). Conformational changes in protein structure allow the control of the permeation abilities by outer stimuli (gating). In polymeric membranes, the selectivity is due to electrostatic or size-exclusion. It can thus be controlled by size variation or electric charges. Controllable permeation can be useful to determine particle-size distributions in continuous ow, e.g. in micro uidics and biomedicine to gain cell diameter profiles in blood. The present approach uses patterned polyethylene terephthalate (PET) membranes with hydrogel surface coating for permeation control by size-exclusion. The thermosensitive hydrogel poly(N-isopropylacrylamide) (PNIPAAm) is structured with a cross-shaped pore geometry. A change in the temperature of the water ow through the membrane leads to a pore shape variation. The temperature dependent behavior of PNIPAAm can be numerically modeled with a temperature expansion model, where the swelling and deswelling is depicted by temperature dependent expansion coefficients. In the present study, the free swelling behavior was implemented to the Finite Element tool ABAQUS for the complex composite structure of the permeation control membrane. Experimental values of the geometry characteristics were derived from microscopy images with the tool ImageJ and compared to simulation results. Numerical simulations using the derived thermomechanical model for different pore geometries (circular, rectangle, cross and triangle) were performed. With this study, we show that the temperature expansion model with values from the free swelling behavior can be used to adequately predict the deformation behavior of the complex membrane system. The predictions can be used to optimize the behavior of the membrane pores and the overall performance of the smart membrane.

Indiana University-Purdue University Indianapolis (IUPUI) / Hydrogels prepared from photopolymerization have been widely used in many biomedical applications. Ultraviolet (200-400 nm) or visible (400-800 nm) light can interact with light-sensitive compounds called photoinitiators to form radical species that trigger photopolylmerization. Since UV light has potential to cause cell damage, visible light-mediated photopolymerization has attracted much attention. The conventional method to fabricate hydrogels under visible light exposure requires usage of co-initiator triethanolamine (TEA) at high concentration (∼200 mM), which reduces cell viability. Therefore, the first objective of this thesis was to develop a new method to form poly(ethylene glycol)-diacrylate (PEGDA) hydrogel without using TEA. Specifically, thiol-containing molecules (e.g. dithiothreitol or cysteine-containing peptides) were used to replace TEA as both co-initiator and crosslinker. Co-monomer 1-vinyl-2-pyrrolidinone (NVP) was used to accelerate gelation kinetics. The gelation rate could be tuned by changing the concentration of eosinY or NVP. Variation of thiol concentration affected degradation rate of hydrogels. Many bioactive motifs have been immobilized into hydrogels to enhance cell attachment and adhesion in previous studies. In this thesis, pendant peptide RGDS was incorporated via two methods with high incorporation efficiency. The stiffness of hydrogels decreased when incorporating RGDS. The second objective of this thesis was to fabricate hydrogels using poly(ethylene glycol)-tetra-acrylate (PEG4A) macromer instead of PEGDA via the same step-and-chain-growth mixed mode mechanism. Formation of hydrogels using PEGDA in this thesis required high concentration of macromer (∼10 wt.%). Since PEG4A had two more functional acrylate groups than PEGDA, hydrogels could be fabricated using lower concentration of PEG4A (∼4 wt.%). The effects of NVP concentration and thiol content on hydrogel properties were similar to those on PEGDA hydrogels. In addition, the functionality and chemistry of thiol could also affect hydrogel properties.