Cyanide-catalyzed aldimine coupling was employed to synthesize compounds with 1,2-ene-diamine and α-imine-amine structural motifs: 1,2,N,N'- tetraphenyletheylene-1,2-diamine (13) and (+/-)-2,3-di-(2-hydroxyphenyl)-1,2- dihydroquinoxaline (17), respectively. Single crystal X-ray diffraction provided solidstate structures and density functional theory calculations were used to probe isomeric preferences within this and the related hydroxy-ketone/ene-diol system. The enediamine and imine-amine core structures were calculated to be essentially identical in energy. However, additional effects-such as π conjugation-in 13 render an enediamine structure that is slightly more stable than the imine-amine tautomer (14). In contrast, the intramolecular hydrogen bonding present in 17 significantly favors the imine-amine isomer over the ene-diamine tautomer (18). Aldimine coupling (AIC) is the nitrogen analogue of the benzoin condensation and has been applied to dialdimines, providing the first examples of cyclizations effected by cyanide-catalyzed AIC. Sodium cyanide promoted the facile, intramolecular cyclization of several dialdimines in N,N-dimethylformamide, methanol, or dichloromethane/water (phase-transfer conditions) yielding a variety of six-membered heterocycles. Under aerobic conditions, an oxidative cyclization occurs to provide the diimine heterocycle. Cyanide-catalyzed aldimine coupling was employed as a new synthetic method for oligomerization. Nine rigidly spaced dialdimines were oxidatively coupled under aerobic conditions to yield conjugated oligoketimines and polyketimines with unprecedented structure and molecular weight (DP = 2 - 23, ~700 -8200 g/mol). The α- diimine linkage was established based on IR spectroscopy, NMR spectroscopy, size exclusion chromatography, and X-ray crystallographic characterization of the model oxidized dimer of N-benzylidene-(p-phenoxy)-aniline. Cyclic voltammetry indicates ptype electrical conductivity, suggesting they are promising candidates for plastic electronic devices. The cyanide-catalyzed benzoin condensation reaction of 4-substituted benzaldehydes followed by oxidation to the diketone, and the Schiff Base condensation of two equivalents of o-aminophenol provides 2,3-(4-X-phenyl)2-1,4-(2- hydroxyphenyl)2-1,4-diazabutadiene. The ligand is given the moniker X-dabphol. These ligands are readily metallated to form M-X-dabphol complexes. The copper complexes catalytically fix CO2 with propylene oxide to yield propylene carbonate. DFT studies along with a comparison with Hammet parameters help validate and elaborate on the catalytic cycle and the catalytic results obtained. The nickel complex is competent for olefin epoxidation. Synthesis, characterization, X-ray structure, DFT analysis, and catalytic activity of the parent nickel dabphol complex are reported.

Self-assembly processes were used to construct supramolecular architectures based on metal-ligand interactions. The structures formed strongly depend on the used metal ion, the ligand type, the chosen counter ion and solvent as well as on the experimental conditions. The focus of the studies was the design of multifunctional N-donor ligands and the characterization of their complexing and structural properties. This work was divided into three distinct main parts: The bis(2-pyridylimine), the bis(2-hydroxyaryl) imine and the tripodal imine / amine ligand approach. In the first part a series of bis(2-pyridylimine) derivatives having different linking elements were employed as building blocks for novel supramolecular architectures. Reaction of individual d-block metal salts with these ligands has led to the isolation of coordination polymers, a metallamacrocycle, double-stranded helicates, triple-stranded helicates as well as of circular meso-helicates. The nature of the spacer in the Schiff base ligands, the noncovalent weak interactions, such as hydrogen bond, face-to-face π-π and edge-to-face CH-π interactions, are all important factors influencing the architecture of the final products. Topological control of the assembly process of the hexanuclear meso-helicates is clearly associated with the bidentate coordination of the sulfate anion which directs the formation of a double- rather than a triple-stranded helicate around the octahedrally coordinated Cu(II). Surprisingly, the variation of the linker function in the ligands, which significantly changes the linking angle of the pyridylimine strands, has only a little influence of the resulting structure. Also the use of a mixture of ligands does not influence the meso-helicate topology; the result is the symmetrically mixed meso-helicate. The new iron(II) triple helicate [Fe2(L5)3](PF6)4 14 {L5 = bis[4-(2-pyridylmethyleneimino)phenyl]-1,1-cyclohexane} in its chloride form binds strongly to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the helicate. The induced CD spectrum gives some evidence that [Fe2(L5)3]4+ interacts with the DNA in a single binding mode, which is consistent with major groove binding. The cytotoxicity of the new iron(II) triple helicate 14 was evaluated on human lung cancer A549 cells and compared with that of cisplatin and that of the previously reported iron(II) triple helicate [Fe2(L1)3]4+{L1 = bis[4-(2-pyridylmethyleneimino)phenyl]methane}. The first results show some distinguishing features for 14 obviously caused by the existing structural differences of the complexes. In the second part of the thesis, novel uranyl complexes of the bis(2-hydroxyaryl) imine ligands have been synthesized and characterized. 1D coordination polymers and mononuclear structures were formed. In all complexes a distorted hexagonal bipyramidal coordination geometry around the uranyl centre is observed. The imine nitrogen atoms of the ligands do not bind to the metal centre but interact strongly with the hydroxy group via H-bonding. DFT calculations made with L8 ( α,α’-Bis(salicylimino)-m-xylene) are in good agreement with the X-ray crystal structure data. Liquid-liquid extraction studies involving selected ligands and Eu(III) or U(VI) indicate remarkably high selectivity for U(VI) over Eu(III) at weak acidic pH conditions. We believe that the study made opens up new possibilities for uranyl ion extraction which could be interesting in view of the treatment of nuclear waste. In the third part of the thesis, a series of multifunctional tripodal ligands with different N-donor centres were used for U(VI) and lanthanide, Nd(III), Eu(III) and Yb(III), binding and extraction. Reaction of these metal ions with selected tripodal ligands afforded complexes which were characterized by ESI mass spectroscopy. The complex composition was found to be 1:1 in all cases. The extraction behaviour of the tripodal ligands towards Eu(III) and U(VI) was studied both in the absence and presence of octanoic acid as co-ligand using the extraction system Eu(NO3)3 or UO2(NO3)2–buffer–H2O/ ligand–CHCl3. These separation systems show a remarkably high selectivity for U(VI) over Eu(III). It is interesting to note that the addition of the octanoic acid to the extraction system leads to high synergistic effects. A series of Eu(III) extraction experiments were done to clarify the composition of the extracted complexes. The results clearly point to the formation of various species with changing composition.

Self-assembly processes were used to construct supramolecular architectures based on metal-ligand interactions. The structures formed strongly depend on the used metal ion, the ligand type, the chosen counter ion and solvent as well as on the experimental conditions. The focus of the studies was the design of multifunctional N-donor ligands and the characterization of their complexing and structural properties. This work was divided into three distinct main parts: The bis(2-pyridylimine), the bis(2-hydroxyaryl) imine and the tripodal imine / amine ligand approach. In the first part a series of bis(2-pyridylimine) derivatives having different linking elements were employed as building blocks for novel supramolecular architectures. Reaction of individual d-block metal salts with these ligands has led to the isolation of coordination polymers, a metallamacrocycle, double-stranded helicates, triple-stranded helicates as well as of circular meso-helicates. The nature of the spacer in the Schiff base ligands, the noncovalent weak interactions, such as hydrogen bond, face-to-face π-π and edge-to-face CH-π interactions, are all important factors influencing the architecture of the final products. Topological control of the assembly process of the hexanuclear meso-helicates is clearly associated with the bidentate coordination of the sulfate anion which directs the formation of a double- rather than a triple-stranded helicate around the octahedrally coordinated Cu(II). Surprisingly, the variation of the linker function in the ligands, which significantly changes the linking angle of the pyridylimine strands, has only a little influence of the resulting structure. Also the use of a mixture of ligands does not influence the meso-helicate topology; the result is the symmetrically mixed meso-helicate. The new iron(II) triple helicate [Fe2(L5)3](PF6)4 14 {L5 = bis[4-(2-pyridylmethyleneimino)phenyl]-1,1-cyclohexane} in its chloride form binds strongly to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the helicate. The induced CD spectrum gives some evidence that [Fe2(L5)3]4+ interacts with the DNA in a single binding mode, which is consistent with major groove binding. The cytotoxicity of the new iron(II) triple helicate 14 was evaluated on human lung cancer A549 cells and compared with that of cisplatin and that of the previously reported iron(II) triple helicate [Fe2(L1)3]4+{L1 = bis[4-(2-pyridylmethyleneimino)phenyl]methane}. The first results show some distinguishing features for 14 obviously caused by the existing structural differences of the complexes. In the second part of the thesis, novel uranyl complexes of the bis(2-hydroxyaryl) imine ligands have been synthesized and characterized. 1D coordination polymers and mononuclear structures were formed. In all complexes a distorted hexagonal bipyramidal coordination geometry around the uranyl centre is observed. The imine nitrogen atoms of the ligands do not bind to the metal centre but interact strongly with the hydroxy group via H-bonding. DFT calculations made with L8 ( α,α’-Bis(salicylimino)-m-xylene) are in good agreement with the X-ray crystal structure data. Liquid-liquid extraction studies involving selected ligands and Eu(III) or U(VI) indicate remarkably high selectivity for U(VI) over Eu(III) at weak acidic pH conditions. We believe that the study made opens up new possibilities for uranyl ion extraction which could be interesting in view of the treatment of nuclear waste. In the third part of the thesis, a series of multifunctional tripodal ligands with different N-donor centres were used for U(VI) and lanthanide, Nd(III), Eu(III) and Yb(III), binding and extraction. Reaction of these metal ions with selected tripodal ligands afforded complexes which were characterized by ESI mass spectroscopy. The complex composition was found to be 1:1 in all cases. The extraction behaviour of the tripodal ligands towards Eu(III) and U(VI) was studied both in the absence and presence of octanoic acid as co-ligand using the extraction system Eu(NO3)3 or UO2(NO3)2–buffer–H2O/ ligand–CHCl3. These separation systems show a remarkably high selectivity for U(VI) over Eu(III). It is interesting to note that the addition of the octanoic acid to the extraction system leads to high synergistic effects. A series of Eu(III) extraction experiments were done to clarify the composition of the extracted complexes. The results clearly point to the formation of various species with changing composition.